Umbrel constantly decides to shut down after 24 hours or less

1

I am creating a post again since I did not receive help, my umbrel restarts every 24 hours (it does not restart, it turns off and the green light comes on on my raspberry pi) I already restarted it from 0, formatting the SD and the portable disk, without However, the shutdowns continue. My Node was at 50% (280GB) and when I turned it off and on again it went back to 37%
I don’t know what to do anymore, I had bitcoins on my Lightning node that I want to recover but I’m having a hard time installing the bitcoin node again because of the constant shutdowns it’s having, the power hasn’t gone out, the node doesn’t appear connected (check with AngryIP)

From the configurations there is 300GB in Bitcoin Node but in the app there are 270GB downloaded

image
image1371×360 24.5 KB

image
image878×459 42.6 KB

I previously had my node 100% downloaded but one day what the title indicates happened, I had to unplug and plug back in and it required me to “reindex” and I did it, but nevertheless if it restarts every 24 hours it is impossible to do the reindex since it would go back to 0% every time (happened 5 times) until I decided to delete everything and try to download it again.

I am literally desperate, I am afraid that I have lost my money that I had in lightning node (not in channels, I only had bitcoin in my wallet)

Troubleshooting Log

= Umbrel debug info =

Umbrel version

0.5.4

Flashed OS version

v0.5.4-patch-1

Raspberry Pi Model

Revision : d03115
Serial : 10000000e5491007
Model : Raspberry Pi 4 Model B Rev 1.5

Firmware

May 9 2023 12:16:34
Copyright (c) 2012 Broadcom
version 30aa0d70ab280427ba04ebc718c81d4350b9d394 (clean) (release) (start)

Temperature

temp=48.2’C

Throttling

throttled=0x0

Memory usage

          total        used        free      shared  buff/cache   available

Mem: 7.8G 901M 2.4G 17M 4.5G 6.8G
Swap: 4.1G 0B 4.1G

bitcoin: 13.6%
total: 11.5%
system: 0%

Memory monitor logs

2023-11-02 23:53:10 Memory monitor running!
2023-11-03 22:34:32 Memory monitor running!
2023-11-04 21:41:59 Memory monitor running!

Filesystem information

Filesystem Size Used Avail Use% Mounted on
/dev/root 119G 5.0G 109G 5% /
/dev/sda1 916G 287G 583G 33% /home/umbrel/umbrel

Startup service logs

Nov 04 21:41:59 umbrel umbrel startup[1808]: Starting Docker services…
Nov 04 21:42:04 umbrel umbrel startup[1808]: Creating manager …
Nov 04 21:42:04 umbrel umbrel startup[1808]: Creating auth …
Nov 04 21:42:04 umbrel umbrel startup[1808]: Creating tor_proxy …
Nov 04 21:42:04 umbrel umbrel startup[1808]: Creating dashboard …
Nov 04 21:42:12 umbrel umbrel startup[1808]: Creating tor_proxy … done
Nov 04 21:42:13 umbrel umbrel startup[1808]: Creating dashboard … done
Nov 04 21:42:13 umbrel umbrel startup[1808]: Creating manager … done
Nov 04 21:42:13 umbrel umbrel startup[1808]: Creating nginx …
Nov 04 21:42:15 umbrel umbrel startup[1808]: Creating auth … done
Nov 04 21:42:21 umbrel umbrel startup[1808]: Creating nginx … done
Nov 04 21:42:22 umbrel umbrel startup[1808]: Removing status server iptables entry…
Nov 04 21:42:22 umbrel umbrel startup[1808]: Removed existing iptables entry.
Nov 04 21:42:22 umbrel umbrel startup[1808]: Starting installed apps…
Nov 04 21:42:22 umbrel umbrel startup[1808]: Starting app bitcoin…
Nov 04 21:42:22 umbrel umbrel startup[1808]: Executing hook: /home/umbrel/umbrel/app-data/bitcoin/hooks/pre-start
Nov 04 21:42:25 umbrel umbrel startup[1808]: Creating bitcoin_tor_1 …
Nov 04 21:42:25 umbrel umbrel startup[1808]: Creating bitcoin_i2pd_daemon_1 …
Nov 04 21:42:25 umbrel umbrel startup[1808]: Creating bitcoin_app_proxy_1 …
Nov 04 21:42:25 umbrel umbrel startup[1808]: Creating bitcoin_bitcoind_1 …
Nov 04 21:42:35 umbrel umbrel startup[1808]: Creating bitcoin_tor_1 … done
Nov 04 21:42:37 umbrel umbrel startup[1808]: Creating bitcoin_bitcoind_1 … done
Nov 04 21:42:37 umbrel umbrel startup[1808]: Creating bitcoin_server_1 …
Nov 04 21:42:39 umbrel umbrel startup[1808]: Creating bitcoin_i2pd_daemon_1 … done
Nov 04 21:42:39 umbrel umbrel startup[1808]: Creating bitcoin_app_proxy_1 … done
Nov 04 21:42:52 umbrel umbrel startup[1808]: Creating bitcoin_server_1 … done
Nov 04 21:42:52 umbrel umbrel startup[1808]: Umbrel is now accessible at
Nov 04 21:42:52 umbrel umbrel startup[1808]: http://umbrel.local
Nov 04 21:42:52 umbrel umbrel startup[1808]: http://192.168.100.6
Nov 04 21:42:52 umbrel systemd[1]: Started Umbrel Startup Service.

External storage service logs

Nov 04 21:17:06 umbrel external storage mounter[486]: Rebinding USB drivers…
Nov 04 21:17:07 umbrel external storage mounter[486]: Checking USB devices are back…
Nov 04 21:17:07 umbrel external storage mounter[486]: Waiting for USB devices…
Nov 04 21:17:08 umbrel external storage mounter[486]: Waiting for USB devices…
Nov 04 21:17:09 umbrel external storage mounter[486]: Waiting for USB devices…
Nov 04 21:17:10 umbrel external storage mounter[486]: Checking if the device is ext4…
Nov 04 21:17:10 umbrel external storage mounter[486]: Yes, it is ext4
Nov 04 21:17:10 umbrel external storage mounter[486]: Checking filesystem for corruption…
Nov 04 21:17:10 umbrel external storage mounter[486]: e2fsck 1.44.5 (15-Dec-2018)
Nov 04 21:17:10 umbrel external storage mounter[486]: umbrel: recovering journal
Nov 04 21:41:38 umbrel external storage mounter[486]: Setting free inodes count to 60903834 (was 60910702)
Nov 04 21:41:38 umbrel external storage mounter[486]: Setting free blocks count to 164981911 (was 193649098)
Nov 04 21:41:38 umbrel external storage mounter[486]: umbrel: clean, 151142/61054976 files, 79208297/244190208 blocks
Nov 04 21:41:38 umbrel external storage mounter[486]: Mounting partition…
Nov 04 21:41:38 umbrel external storage mounter[486]: Checking if device contains an Umbrel install…
Nov 04 21:41:39 umbrel external storage mounter[486]: Yes, it contains an Umbrel install
Nov 04 21:41:39 umbrel external storage mounter[486]: Bind mounting external storage over local Umbrel installation…
Nov 04 21:41:39 umbrel external storage mounter[486]: Bind mounting external storage over local Docker data dir…
Nov 04 21:41:39 umbrel external storage mounter[486]: Bind mounting external storage to /swap
Nov 04 21:41:39 umbrel external storage mounter[486]: Bind mounting SD card root at /sd-card…
Nov 04 21:41:39 umbrel external storage mounter[486]: Checking Umbrel root is now on external storage…
Nov 04 21:41:40 umbrel external storage mounter[486]: Checking /var/lib/docker is now on external storage…
Nov 04 21:41:40 umbrel external storage mounter[486]: Checking /swap is now on external storage…
Nov 04 21:41:40 umbrel external storage mounter[486]: Setting up swapfile
Nov 04 21:41:48 umbrel external storage mounter[486]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes)
Nov 04 21:41:48 umbrel external storage mounter[486]: no label, UUID=b8b0c503-b3fe-4068-a71d-e89417b4259f
Nov 04 21:41:48 umbrel external storage mounter[486]: Checking SD Card root is bind mounted at /sd-root…
Nov 04 21:41:48 umbrel external storage mounter[486]: Starting external drive mount monitor…
Nov 04 21:41:48 umbrel external storage mounter[486]: Mount script completed successfully!
Nov 04 21:41:48 umbrel systemd[1]: Started External Storage Mounter.

External storage SD card update service logs

– Logs begin at Thu 2019-02-14 10:11:58 UTC, end at Sat 2023-11-04 21:48:12 UTC. –
Nov 04 21:41:59 umbrel systemd[1]: Starting External Storage SDcard Updater…
Nov 04 21:41:59 umbrel external storage updater[1727]: Checking if SD card Umbrel is newer than external storage…
Nov 04 21:41:59 umbrel external storage updater[1727]: No, SD version is not newer, exiting.
Nov 04 21:41:59 umbrel systemd[1]: Started External Storage SDcard Updater.

Karen logs

Creating backup…
Adding random padding…
1+0 records in
1+0 records out
4948 bytes (4.9 kB, 4.8 KiB) copied, 0.000287386 s, 17.2 MB/s
Creating encrypted tarball…
backup/
backup/.padding
Uploading backup…
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:–:-- --:–:-- --:–:-- 0
0 0 0 0 0 0 0 0 --:–:-- 0:00:03 --:–:-- 0
0 0 0 0 0 0 0 0 --:–:-- 0:00:04 --:–:-- 0
100 5470 0 0 100 5470 0 970 0:00:05 0:00:05 --:–:-- 970
100 5616 100 146 100 5470 22 838 0:00:06 0:00:06 --:–:-- 861
{“message”:“Successfully uploaded backup 1699099820149.tar.gz.pgp for backup ID 043ce90b3ddba548ea82a76a462d65e4def60a4267aa8070dff618753ba92b25”}

====== Backup success =======

Got signal: change-password
karen is getting triggered!
New password: Retype new password: passwd: password updated successfully
Got signal: backup
karen is getting triggered!
Deriving keys…
Creating backup…
Adding random padding…
1+0 records in
1+0 records out
955 bytes copied, 0.000206683 s, 4.6 MB/s
Creating encrypted tarball…
backup/
backup/.padding
Uploading backup…
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:–:-- --:–:-- --:–:-- 0
0 0 0 0 0 0 0 0 --:–:-- 0:00:04 --:–:-- 0
0 0 0 0 0 0 0 0 --:–:-- 0:00:05 --:–:-- 0
100 1617 100 146 100 1471 20 210 0:00:07 0:00:06 0:00:01 231
100 1617 100 146 100 1471 20 210 0:00:07 0:00:06 0:00:01 231
{“message”:“Successfully uploaded backup 1699124522401.tar.gz.pgp for backup ID 043ce90b3ddba548ea82a76a462d65e4def60a4267aa8070dff618753ba92b25”}

====== Backup success =======

karen is running in /home/umbrel/umbrel/events
Got signal:
karen is getting triggered!
Got signal:
karen is getting triggered!
./karen: line 75: /home/umbrel/umbrel/events/triggers/: Is a directory
./karen: line 75: /home/umbrel/umbrel/events/triggers/: Is a directory
Got signal: debug
karen is getting triggered!
Debug result file generated
Got signal: debug
karen is getting triggered!

Docker containers

NAMES STATUS
bitcoin_server_1 Up 10 minutes
bitcoin_bitcoind_1 Up 10 minutes
bitcoin_tor_1 Up 10 minutes
bitcoin_app_proxy_1 Up 10 minutes
bitcoin_i2pd_daemon_1 Up 10 minutes
nginx Up 11 minutes
dashboard Up 11 minutes
manager Up 11 minutes
auth Up 11 minutes
tor_proxy Up 11 minutes

Umbrel logs

Attaching to manager
manager | ::ffff:10.21.21.2 - - [Sat, 04 Nov 2023 21:53:13 GMT] “GET /v1/system/get-update HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.21.2 - - [Sat, 04 Nov 2023 21:53:20 GMT] “POST /v1/system/debug HTTP/1.0” 200 17 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.21.2 - - [Sat, 04 Nov 2023 21:53:21 GMT] “GET /v1/system/debug-result HTTP/1.0” 200 23 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:21 GMT] “GET /v1/account/token?token=419ea9f708f7421ea2638cf9cd9bda4b4290b1dcf5457b7966c1c51e26b29ffd HTTP/1.1” 200 16 “-” “app-proxy/0.0.1”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/account/token?token=419ea9f708f7421ea2638cf9cd9bda4b4290b1dcf5457b7966c1c51e26b29ffd HTTP/1.1” 200 16 “-” “app-proxy/0.0.1”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/account/token?token=419ea9f708f7421ea2638cf9cd9bda4b4290b1dcf5457b7966c1c51e26b29ffd HTTP/1.1” 200 16 “-” “app-proxy/0.0.1”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/account/token?token=419ea9f708f7421ea2638cf9cd9bda4b4290b1dcf5457b7966c1c51e26b29ffd HTTP/1.1” 200 16 “-” “app-proxy/0.0.1”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.21.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/system/debug-result HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:23 GMT] “GET /v1/account/token?token=419ea9f708f7421ea2638cf9cd9bda4b4290b1dcf5457b7966c1c51e26b29ffd HTTP/1.1” 200 16 “-” “app-proxy/0.0.1”
manager |
manager | umbrel-manager
manager | ::ffff:10.21.21.2 - - [Sat, 04 Nov 2023 21:53:24 GMT] “GET /v1/system/debug-result HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
manager |
manager | umbrel-manager

Tor Proxy logs

Attaching to tor_proxy
tor_proxy | Nov 04 21:42:34.000 [notice] Bootstrapped 60% (loading_descriptors): Loading relay descriptors
tor_proxy | Nov 04 21:42:35.000 [notice] Bootstrapped 67% (loading_descriptors): Loading relay descriptors
tor_proxy | Nov 04 21:42:35.000 [notice] Bootstrapped 72% (loading_descriptors): Loading relay descriptors
tor_proxy | Nov 04 21:42:35.000 [notice] Bootstrapped 75% (enough_dirinfo): Loaded enough directory info to build circuits
tor_proxy | Nov 04 21:42:35.000 [notice] Bootstrapped 80% (ap_conn): Connecting to a relay to build circuits
tor_proxy | Nov 04 21:42:35.000 [notice] Bootstrapped 85% (ap_conn_done): Connected to a relay to build circuits
tor_proxy | Nov 04 21:42:36.000 [notice] Bootstrapped 89% (ap_handshake): Finishing handshake with a relay to build circuits
tor_proxy | Nov 04 21:42:36.000 [notice] Bootstrapped 90% (ap_handshake_done): Handshake finished with a relay to build circuits
tor_proxy | Nov 04 21:42:36.000 [notice] Bootstrapped 95% (circuit_create): Establishing a Tor circuit
tor_proxy | Nov 04 21:42:37.000 [notice] Bootstrapped 100% (done): Done

App logs

bitcoin

Attaching to bitcoin_server_1, bitcoin_bitcoind_1, bitcoin_tor_1, bitcoin_app_proxy_1, bitcoin_i2pd_daemon_1
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
app_proxy_1 | Validating token: 419ea9f708f7 …
bitcoind_1 | 2023-11-04T21:53:12Z UpdateTip: new best=0000000000000000002bb732c1c6bbbdf568fe7604be115f18d8b8eaa427c4b5 height=535615 version=0x20000000 log2_work=89.401095 tx=333185516 date=‘2018-08-07T12:03:01Z’ progress=0.374913 cache=34.0MiB(255785txo)
bitcoind_1 | 2023-11-04T21:53:14Z UpdateTip: new best=00000000000000000026551315acc74aeadb1cc0d63ac548efbe301f6350efa8 height=535616 version=0x20000000 log2_work=89.401140 tx=333187884 date=‘2018-08-07T12:31:00Z’ progress=0.374915 cache=34.7MiB(261520txo)
bitcoind_1 | 2023-11-04T21:53:15Z UpdateTip: new best=000000000000000000280446c653fe4796bef90fd7634e82bdc5abbab786a424 height=535617 version=0x20000000 log2_work=89.401185 tx=333190676 date=‘2018-08-07T12:34:34Z’ progress=0.374919 cache=35.3MiB(266636txo)
bitcoind_1 | 2023-11-04T21:53:18Z UpdateTip: new best=00000000000000000020ebf707f3914bc351231d9af1b85022f7f55f589ce04c height=535618 version=0x20000000 log2_work=89.401230 tx=333192207 date=‘2018-08-07T12:40:54Z’ progress=0.374920 cache=36.0MiB(272269txo)
bitcoind_1 | 2023-11-04T21:53:20Z UpdateTip: new best=000000000000000000014a1113021b3edc30c03a4555cc95b9fafe923e5274f4 height=535619 version=0x20000000 log2_work=89.401275 tx=333194061 date=‘2018-08-07T12:42:30Z’ progress=0.374922 cache=36.5MiB(276216txo)
bitcoind_1 | 2023-11-04T21:53:21Z UpdateTip: new best=0000000000000000002783b9d74aefbaca94a53b43e5cef7934816e8fa09eefb height=535620 version=0x20000000 log2_work=89.401320 tx=333196673 date=‘2018-08-07T13:00:33Z’ progress=0.374925 cache=36.9MiB(280088txo)
bitcoind_1 | 2023-11-04T21:53:23Z UpdateTip: new best=000000000000000000193b645803ec79d0497386c63094934cb16cf5d76761c2 height=535621 version=0x20000000 log2_work=89.401365 tx=333197232 date=‘2018-08-07T13:06:28Z’ progress=0.374926 cache=37.2MiB(282688txo)
bitcoind_1 | 2023-11-04T21:53:25Z UpdateTip: new best=0000000000000000001a682cfeb637fac2dd89f5c59a32517d16e10ed1ee9ec0 height=535622 version=0x20000000 log2_work=89.401410 tx=333197802 date=‘2018-08-07T13:07:00Z’ progress=0.374927 cache=37.6MiB(285495txo)
bitcoind_1 | 2023-11-04T21:53:27Z UpdateTip: new best=00000000000000000025c990cc28eef0ebf3911e63f5ef5a29ac593b35043421 height=535623 version=0x20000000 log2_work=89.401456 tx=333199550 date=‘2018-08-07T13:07:26Z’ progress=0.374929 cache=38.0MiB(289064txo)
bitcoind_1 | 2023-11-04T21:53:28Z UpdateTip: new best=0000000000000000001dc7bb7865a57c31a09374929de65600819ba714f8fa81 height=535624 version=0x20000000 log2_work=89.401501 tx=333202002 date=‘2018-08-07T13:23:58Z’ progress=0.374931 cache=38.7MiB(294450txo)
server_1 | umbrel-middleware
server_1 | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/bitcoind/info/connections HTTP/1.1” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
server_1 |
server_1 | umbrel-middleware
server_1 | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/bitcoind/info/stats HTTP/1.1” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
server_1 |
server_1 | umbrel-middleware
server_1 | ::ffff:10.21.0.2 - - [Sat, 04 Nov 2023 21:53:22 GMT] “GET /v1/bitcoind/info/sync HTTP/1.1” 200 103 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/118.0.0.0 Safari/537.36”
server_1 |
server_1 | umbrel-middleware
i2pd_daemon_1 | 21:52:09@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:11@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:11@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:11@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:13@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:13@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:14@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:52:19@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:53:16@186/error - Garlic: Failed to decrypt message
i2pd_daemon_1 | 21:53:22@186/error - Garlic: Failed to decrypt message
tor_1 | Nov 04 21:44:48.000 [notice] Bootstrapped 61% (loading_descriptors): Loading relay descriptors
tor_1 | Nov 04 21:44:49.000 [notice] Bootstrapped 67% (loading_descriptors): Loading relay descriptors
tor_1 | Nov 04 21:44:49.000 [notice] Bootstrapped 72% (loading_descriptors): Loading relay descriptors
tor_1 | Nov 04 21:44:49.000 [notice] Bootstrapped 75% (enough_dirinfo): Loaded enough directory info to build circuits
tor_1 | Nov 04 21:44:49.000 [notice] Bootstrapped 80% (ap_conn): Connecting to a relay to build circuits
tor_1 | Nov 04 21:44:50.000 [notice] Bootstrapped 85% (ap_conn_done): Connected to a relay to build circuits
tor_1 | Nov 04 21:44:50.000 [notice] Bootstrapped 89% (ap_handshake): Finishing handshake with a relay to build circuits
tor_1 | Nov 04 21:44:51.000 [notice] Bootstrapped 90% (ap_handshake_done): Handshake finished with a relay to build circuits
tor_1 | Nov 04 21:44:51.000 [notice] Bootstrapped 95% (circuit_create): Establishing a Tor circuit
tor_1 | Nov 04 21:44:51.000 [notice] Bootstrapped 100% (done): Done

==== Result ====

==== END =====

2

It is quite frustrating since I spent 1 month downloading the bitcoin node 100% and now I have been having reinstallation problems for days, I no longer know what to do, I am having a very bad experience for now I want to install the node and withdraw my bitcoins and never return to use umbrel. I hope you can help me since before it DIDN’T turn off for DAYS! And I say days because it was on for more than 10 days without problems until one day the constant shutdowns began every 12-24 hours.

3

The last thing I saw was that I was going through block 595,000 or so and after I heard a noise like when Umbrel was turned off, I couldn’t see any more Umbrel connected to the network, I couldn’t access it with Putty in any way from umbrel.local or any IP related, it’s like it turns off BY ITSELF! Once you take out the cable and put it back in, it starts as if nothing had happened, but with the fact that the progress is deleted (not the downloaded GB) and it goes back much further back, which makes it further away from reinstalling every day. the bitcoin node. I hope you can help me, I’ve already tried restarting everything from scratch.

4

Need help. thanks.

5

Hi for your first question, have you noted down your seed phrase (we should be able to get it eitherway just dont uninstall the lightning app)? You can use this to restore your bitcoin in basically any wallet of your choosing (sparrow, blue wallet, etc)

Secondly, this issue could be a couple things, but first can i ask what SSD and enclosure are you using?

6

i try in Sparrow but say next error
image

and second, is HDD portable 1TB Toshiba

7

I was going 62% without having problems and now one appeared out of nowhere, my raspberry didn’t even turn off, the error just appeared.
debug.log from Bitcoin node error:
2023-11-06T15:28:14Z Included configuration file umbrel-bitcoin.conf
2023-11-06T15:28:14Z Bitcoin Core version v25.1.0 (release build)
2023-11-06T15:28:14Z Using the ‘standard’ SHA256 implementation
2023-11-06T15:28:14Z Default data directory /data/.bitcoin
2023-11-06T15:28:14Z Using data directory /data/.bitcoin
2023-11-06T15:28:14Z Config file: /data/.bitcoin/bitcoin.conf
2023-11-06T15:28:14Z Config file arg: bantime=“86400”
2023-11-06T15:28:14Z Config file arg: blockfilterindex=“1”
2023-11-06T15:28:14Z Config file arg: dbcache=“6676”
2023-11-06T15:28:14Z Config file arg: i2pacceptincoming=“0”
2023-11-06T15:28:14Z Config file arg: i2psam=“10.21.22.11:7656”
2023-11-06T15:28:14Z Config file arg: includeconf=“umbrel-bitcoin.conf”
2023-11-06T15:28:14Z Config file arg: listen=“1”
2023-11-06T15:28:14Z Config file arg: listenonion=“0”
2023-11-06T15:28:14Z Config file arg: maxconnections=“125”
2023-11-06T15:28:14Z Config file arg: maxmempool=“300”
2023-11-06T15:28:14Z Config file arg: maxorphantx=“100”
2023-11-06T15:28:14Z Config file arg: maxreceivebuffer=“5000”
2023-11-06T15:28:14Z Config file arg: maxsendbuffer=“1000”
2023-11-06T15:28:14Z Config file arg: maxtimeadjustment=“4200”
2023-11-06T15:28:14Z Config file arg: maxuploadtarget=“0”
2023-11-06T15:28:14Z Config file arg: mempoolexpiry=“336”
2023-11-06T15:28:14Z Config file arg: onlynet=“ipv4”
2023-11-06T15:28:14Z Config file arg: onlynet=“ipv6”
2023-11-06T15:28:14Z Config file arg: onlynet=“i2p”
2023-11-06T15:28:14Z Config file arg: peerblockfilters=“1”
2023-11-06T15:28:14Z Config file arg: peertimeout=“60”
2023-11-06T15:28:14Z Config file arg: persistmempool=“1”
2023-11-06T15:28:14Z Config file arg: rpcworkqueue=“128”
2023-11-06T15:28:14Z Config file arg: timeout=“5000”
2023-11-06T15:28:14Z Config file arg: txindex=“1”
2023-11-06T15:28:14Z Config file arg: whitelist=“10.21.0.0/16”
2023-11-06T15:28:14Z Config file arg: [main] bind=“0.0.0.0:8333”
2023-11-06T15:28:14Z Config file arg: [main] bind=“10.21.21.8:8334=onion”
2023-11-06T15:28:14Z Command-line arg: port=“8333”
2023-11-06T15:28:14Z Command-line arg: rpcallowip=“10.21.0.0/16”
2023-11-06T15:28:14Z Command-line arg: rpcallowip=“127.0.0.1”
2023-11-06T15:28:14Z Command-line arg: rpcauth=****
2023-11-06T15:28:14Z Command-line arg: rpcbind=“10.21.21.8”
2023-11-06T15:28:14Z Command-line arg: rpcbind=“127.0.0.1”
2023-11-06T15:28:14Z Command-line arg: rpcport=“8332”
2023-11-06T15:28:14Z Command-line arg: zmqpubhashblock=“tcp://0.0.0.0:28334”
2023-11-06T15:28:14Z Command-line arg: zmqpubrawblock=“tcp://0.0.0.0:28332”
2023-11-06T15:28:14Z Command-line arg: zmqpubrawtx=“tcp://0.0.0.0:28333”
2023-11-06T15:28:14Z Command-line arg: zmqpubsequence=“tcp://0.0.0.0:28335”
2023-11-06T15:28:14Z Using at most 125 automatic connections (1048576 file descriptors available)
2023-11-06T15:28:14Z Using 16 MiB out of 16 MiB requested for signature cache, able to store 524288 elements
2023-11-06T15:28:14Z Using 16 MiB out of 16 MiB requested for script execution cache, able to store 524288 elements
2023-11-06T15:28:14Z Script verification uses 3 additional threads
2023-11-06T15:28:14Z scheduler thread start
2023-11-06T15:28:14Z Binding RPC on address 10.21.21.8 port 8332
2023-11-06T15:28:14Z Binding RPC on address 127.0.0.1 port 8332
2023-11-06T15:28:14Z [http] creating work queue of depth 128
2023-11-06T15:28:14Z Using random cookie authentication.
2023-11-06T15:28:14Z Unable to rename cookie authentication file /data/.bitcoin/.cookie.tmp to /data/.bitcoin/.cookie
2023-11-06T15:28:14Z Error: Unable to start HTTP server. See debug log for details.
2023-11-06T15:28:14Z Shutdown: In progress…
2023-11-06T15:28:14Z DeleteAuthCookie: Unable to remove random auth cookie file: filesystem error: cannot remove: Bad message [/data/.bitcoin/.cookie]
2023-11-06T15:28:14Z scheduler thread exit
2023-11-06T15:28:14Z Shutdown: done

It’s really disappointing, I decided to turn off the raspberry and not use Umbrel again since it doesn’t work.

8

Now it tells me I should Reindex again! The truth is, I was able to recover my wallet with Blue Wallet so my funds are safe. but my node does not want to download, what a shame, but I will uninstall Umbrel from my raspberry. IT IS NOT WORTH it to continue wasting my time.

9

I decided to remove Umbrel from my Raspberry pi 4 8gb since after several months of trying to install Bitcoin Node (I only had 1 opportunity to have the full node after several errors such as getting stuck in “Starting” and having problems with peers) decided that it is not worth using it, since it is a waste of time. It is easier to install Ubuntu and install Bitcoin Core ORIGINAL and the classic. The truth is, my experience was very bad, but very bad, being a novice user, I had to do many difficult things from Putty, the constant errors that made my node ask me to reindex to the constant meaningless shutdowns, the last of the errors I had today was that without having been turned off, the node decided to turn itself off and I knew this by reading the debug.log that was generated (which I had to monitor many times to know what was happening because it was not moving forward and not connecting with the peers) I had an “HTTP” problem DON’T RESPOND" which didn’t make sense, since it had been connected for less than 1 day, why would it fail? Here in the forum I did not receive any answers or help which makes everything more frustrating, on YouTube there are only videos on how to install it and it only says “you leave the node working and it downloads by itself” which is a lie because problems arise that require that one starts to solve them, which is the point of everything being so easy and beautiful in interface if there are many unresolved problems inside? The truth is a disappointment. I was able to recover my bitcoins using the seed words but if someone who manages to install everything and forgets to backup their words is condemned to lose everything due to a simple error that the program occurs to throw. Umbrel is still very green in my opinion, it needs a lot of work from the developers and the community to offer help for common problems. Without further ado, I hope that some mod closes this post since the problem was not resolved and I decided to delete everything and look for another alternative to keep my bitcoins out of exchanges and hot wallets.
In the future, if it is better optimized and so much “cute” software is left aside and it is functional, I will be here again. but I would also like YouTubers to also talk about the problems or possible problems that one faces when installing Umbrel and not just say “just install it and that’s it!”
Maybe you don’t share my opinion but that’s what I faced in these 3 months of trying to install bitcoin node since having a 100mb connection at least 20 attempts to delete everything and reinstall I came to this conclusion. I even had the node at 99.80% until one night I decided to turn it off from the “Shut Down” option and the next day when I turned it on it told me that it was necessary to Reindex since there was a single missing block which was very frustrating because to get there At that 99.80% I had to spend 9 days, and then another 9 days reindexing, which is 18 lost days added to the other previous days. to just enjoy the full node for EXACTLY 1 month, which made me very happy that he was so punctual to release an error.

10

I understand your frustration- it’s not fun having to constantly resolve issues like this and still continually have problems.

Unfortunately, in this case I believe it comes back to the HDD. You can see on many Raspberry Pi community forums that not every SSD/HDD is suitable for use with Pis. HDD keep disconnecting - Raspberry Pi Forums. This will cause Umbrel to crash, unfortunately we cannot do much to help with this.

We usually recommend the following SSD and enclosure: https://a.co/d/8Qf6qPt https://a.co/d/1YGr589
Otherwise there is also the Umbrel Home