I am rying to factory reset, following these directions: [image] Just got my Umbrel home but login fails Support and Troubleshooting warning Here is a step-by-step guide to fully resetting an Umbrel Home: Initiate the Factory Reset: Open a terminal and run the followi…

Mission accomplished! I flashed umbrelos-amd64-usb-installer.iso version 1.2.2 to the USB stick. I didn’t need the HDMI output at all–it only helped me diagnose that something was going wrong with all the other disk images I tried. Installation went completely smooth, I didn’t even need to push an…

[image] samtronic: umbrelos-amd64-usb-installer.iso.xz There are a few things you mention that are a bit confusing. You mention having “reflashed a usb stick”. This makes me think your hardware is a mini pc/nuc, for example. Then you mention that you even tried umbrelos-amd64-usb-installer.…

Like I mentioned in the title of the thread, I’m on an Umbrel Home. I’ve tried both umbrel-usb-reflasher.iso and umbrelos-amd64-usb-installer.iso.xz (the second one being what the AI support agent on getumbrel.com suggested)

Now I have it clearer. Sorry for forgetting that you are on Umbrel Home. I don’t use it; I have my mini-pc and RPI4. I’ve been looking at the guide you followed and I see the following. In step 1, there is a command that invokes a script that contains the following. # Reset Umbrel ############## …

Very interesting. Yes, I do want to start with a completely clean installation and would be interested… thank you. The rest of the instructions following that script in the first step do not seem to work on their own… I wonder if there is a similar script I would need to have run automatically via…

For example, this is pretty much what I’ve been following, with no luck. [Screenshot 2024-12-02 at 8.16.26 PM] source: Unanswered questions about the Umbrel Home

I was reading what you sent from Unanswered questions about the Umbrel Home . At the top of the page there is a “warning” that says: “Some details may be outdated as this article was written for a version prior to 1.0 of umbrelOS!”. Anyway, I have the feeling that many things have changed in the mos…

Thank you for this! The Umbrel Home only has USB ports, so I’ll need to get my hands on a USB-HDMI output adapter before I can try this out. I am pretty sure umbrel-usb-reflasher.iso is working, because after ~5 minutes, the Umbrel Home shuts off as it should… the umbrel just doesn’t boot properly…

Wait a minute. Did you unzip the file before using Balena Etcher? You download the file umbrelos-amd64-usb-installer.iso.xz. It is packed/compressed. You have to extract it to find the .iso. Maybe that is the problem with Balena Etcher.

There is another option you can try while you are trying to connect a monitor to the umbrel home. Instead of downloading the installer, try just the umbrelos image . Maybe it is the default one for the umbrel home. I have not used this image because I do not need it but, in theory, it is the same b…

Investigating now. I found this video: https://www.youtube.com/watch?v=kIGQEuutthk So I took apart my Umbrel Home to get to the hidden HDMI port so I could see onscreen what was going on. It’s having trouble reading whatever is on the USB key. I am going to try that new link to the umbrelos image…

Is my Umbrel Home bricked?

Support and Troubleshooting

WindMill February 8, 2025, 1:18am 15

Did the same and I upgraded to 1.3 with this:

Topic		Replies	Views
Factory Reset - Umbrel Home Guides	3	1104	March 10, 2026
Umbrel home broken after docker installation Support and Troubleshooting	4	104	July 26, 2024
Issues connected to Umbrel (can only ssh in) Support and Troubleshooting	19	1849	November 12, 2021
Just got my Umbrel home but login fails Support and Troubleshooting	5	522	January 26, 2025
Factory Reset (Umbrel Home) Support and Troubleshooting	4	1987	March 27, 2024

Is my Umbrel Home bricked?

Related topics