Z-Wave Device Pairing

[twickerman]

Running Z-Wave JS on Umbrel Using Portainer

I made some good progress on this after finding the Home Automation Guy article on Installing Z-Wave JS with Home Assistant. I ran through it and found some deviations from the steps but on the whole it worked for me. My initial step was to plug the USB stick into an Umbrel USB port and install Portainer app on Umbrel. The next step is to SSH to umbrel@<umbrel_host> In your terminal session: Execute sudo ls -la /dev/serial/by-id Check the listing and look for your device on the USB port - n…