I’m encountering a bizarre issue with the new 1.1 update while using the USB guide to create a bootable device. I successfully installed Umbrel on my SSD within an Asus mini PC, and everything works perfectly until I try to reboot. Despite my efforts with various BIOS settings, the device won’t boot…

I was able to work this around by installing rEFInd For those encountering difficulties booting Umbrel, here are two alternative solutions based on different scenarios: Option A: If you can connect your drive externally and boot from there, follow these steps: Boot your computer from the externa…

Reboot and select a proper Boot device

Support and Troubleshooting

rando267 May 1, 2024, 10:02pm 2

Topic		Replies	Views
Bootable device not found Support and Troubleshooting	19	1721	June 16, 2024
Subject: Umbrel OS 1.4 Update Issue – Possible GRUB Problem on ASUS VC60 Support and Troubleshooting	1	135	April 5, 2025
WiFi breaks Umbrel 1.2.1 on Pi5 Support and Troubleshooting	2	48	July 10, 2024
X86 system do not find boot device after installation (solved) Support and Troubleshooting	8	2209	September 13, 2024
Umbrel update breaks NVMe support? Support and Troubleshooting	2	82	July 17, 2024

Reboot and select a proper Boot device

Related topics