Can‘t start Umbrel Frontend

[smolgrrr]

Are you able to SSH into the node from another device?

@mayank

• Type in the following command* and press the Enter key:ssh -t umbrel@umbrel.local*In the command given above, you can replace umbrel.local with the local IP of your Umbrel if you prefer. If you are using PowerShell on Windows 10, you may need to run ssh umbrel@umbrel instead of the command given above.
• You will then be prompted to enter your password. This is the same password you use to access your Umbrel through a browser. The default password before you have created an account on your Umbrel is moneyprintergobrrr. You will not be able to see your password as you type it into the terminal. Once you have typed in your password, press the Enter key.

then hopefully from there you can generate some help troubleshooting logs

@mayank

This guide uses commands that assume Umbrel is installed in the home directory of your Linux machine, which is denoted by the tilde symbol ~ . If you installed Umbrel in a different location than the default home directory, you must replace ~ with the actual path to the Umbrel folder in the commands provided in this guide.

For example, you would replace ~ in the command below with the path to your Umbrel installation directory:

`sudo ~/umbrel/scripts/debug`