Upgraded my umbrel node to 0.4.10 now node is stuck

Support and Troubleshooting
1

Hello guys,

ss node
ss node1418×710 91.8 KB

I upgraded my umbrel node to 0.4.10 and now I’m stuck at 99.92 or 99.93% syncronizing.
I tried to SSH into my node and run this command:
rm -f ~/umbrel/statuses/update-in-progress && sudo reboot
but doesn’t seem to have helped

I have debug logs that I’ve seen other people post. I can post the whole thing if it helps.

Can someone please help figure out what’s wrong?

= Umbrel debug info =

Umbrel version

0.4.10

Flashed OS version

v0.4.0

Raspberry Pi Model

Revision : d03114
Serial : 1000000035baff2f
Model : Raspberry Pi 4 Model B Rev 1.4

Firmware

Aug 3 2021 18:14:56
Copyright (c) 2012 Broadcom
version 40787ee5905644f639a2a0f6e00ae12e517a2211 (clean) (release) (start)

Temperature

temp=47.7’C

2

In the Bitcoin page, do you have connected peers? If hours on did pass and no peers, you can try to do some restarts. If it persist, you should use a fixed IP. Look the guides in this site.
I just put a reserved IP number in my router dhcp, and had no more problem to get peers. But now can only access Umbrel typiing the IP number :thinking:

3

I do have peers connected but still stuck at 99.92%
image

4

You need one “in”, I guess. Only suggestion I can give is to fix a IP

5

thank you. I’m a total noob and don’t know how to fix the IP.

I found this: How to set a static IP for your Umbrel machine

But I can’t understand the instructions. I don’t know what to do after I run this command: sudo nano /etc/dhcpcd.conf

6

static IP didn’t help. trying to re-index the blockchain now.

7

What you did? Reserve a IP in the router? Restarted RPi? Without “in” connections you can’t go on.