Hi, After upgrade to SW version 0.5.2 the CPU temperature of my PI4 is around 30 degrees higher. Or, it’s not measured well or SW doesn’t registrate it, I don’t know. When I blow some air through the PI temperature drops immediately from 69 degrees to 39 Celsius which is rather remarkable. I’m not…

I am noticing something similar: After upgrading to 0.5.2 the CPU temperature is shown as “69” C right after refreshing the screen in the settings menu. After 10 seconds it rapidly changes to 54, which is the temp. shown in the log as well. I am not sure if this is a bug, a feature or a truthful di…

Hi Orville, Thanks for your reply and actually its good news as we know that there’s something in the SW not working properly. Statistically there will be more members with the same problem so I will turn this in as a troubleshooting case. Thanks you

Yes, the 69C bug seems to be common in 0.5.2

In latest update, 0.5.3 still shows high temperature. Not 69 degrees but higher than before last two updates.

Good morning, After SW update 0.5.3 this morning temperature in first instance was 69 degrees centigrade, whereafter I blew through the system, temperature immediately dropped back to 38 degrees. Still a temperature measurement bug in the SW. is there already notion taken off by Umbrel team? Thank…

Just posted same issue in another thread before I saw this one: CPU Temperature – Possible bug? Since 0.5.2 & 0.5.3

Hey everyone! Thanks for reporting this behavior. The rise in temperature after every Umbrel update is espected expected behavior, as all CPU cores of the Raspberry Pi are pretty much pegged to 100% in downloading, extracting, and running multiple Docker images simultaneously. The temperature should…

[image] mayank: The rise in temperature after every Umbrel update is espected expected behavior, The initial display of :wink:69 :rofl: degrees does not happen (only) after updating, it happens every time the “settings” menu screen is activated or refreshed. It is then normalised after 10 or …

Right, it seems to be a UI bug just displaying an incorrect temp (69°C) for a few seconds each time settings page is opened, before displaying the ‘correct’ temperature after a few seconds. Logs show: Temperature ----------- temp=50.6'C Throttling ---------- throttled=0x0 …

Upgrade 0.5.3 raises CPU temperature

Support and Troubleshooting

zcain79 November 3, 2022, 5:50pm 7

0.5.2 is when I also began seeing this bug.

CPU Temperature – Possible bug? Since 0.5.2 & 0.5.3

Topic		Replies	Views
CPU Temperature – Possible bug? Since 0.5.2 & 0.5.3 Support and Troubleshooting	1	520	November 3, 2022
Your raspberry pi is too hot Support and Troubleshooting	2	530	July 31, 2022
High load & temperature Support and Troubleshooting	13	2532	May 7, 2022
Umbrel crashes all the time Support and Troubleshooting	5	639	June 11, 2024
My umbrel 1.3 restarts itself every so often Support and Troubleshooting	0	33	December 11, 2024

Upgrade 0.5.3 raises CPU temperature

Related topics