Unable to compute new partition table Insufficient space can not add partition 6

[it.tech670]

Hi,

I’m new to umbrel OS, first time installing it but I keep getting “Unable to compute new partition table Insufficient space can not add partition 6” What am I doing wrong?

Thanks,

[aidencole]

hey, that error suggests umbrelOS can’t fit the partitions it needs onto the drive it’s trying to use, but it’s hard to tell why without a bit more info.

What are you installing on: a Raspberry Pi, a PC, or a VM? Also, how big is the drive you’re installing to, and which umbrelOS image did you download? If you’re using a USB stick for the installer, include its size separately from the destination drive.

A photo of the full error screen would help too. I’d hold off on deleting or resizing any partitions until it’s clear which drive it’s complaining about.

[it.tech670]

Hi, I’m installing it on a mini PC

Specs Intel Celeron 3865U 1.8GHz 2 Cores, 4GB RAM, 128GB SSD. Will unbrel OS work on that specs? I tried 2.0 beta and 1.7.4 both same error. I’m using USB stick and use balena to create the USB stick installer. The SSD is clean no partition. Thank you.

[Maxime]

Same problem. Booting from 16Gb USB Drive (I tried two different USB drives), on baremetal PC

[Maxime]

The problem was the 16Gb Pendrive. No issue using a 32Gb pendrive

[it.tech670]

I’m alao using a 16gb pen drive. I’ll try a 32gb later. Thanks.

[it.tech670]

You’re correct it requires at least 32gb USB drive.

And it’s on umbrel website.

[it.tech670]

And to install umbrel OS on internal storage device the image to download should be Onboard storage or an internal drive.