Problem with umbrel

[combat100]

I have problem with running umbrel

how fix this ? I have Umbrel Hardware

[smolgrrr]

Hi @combat100

Can you please try the following steps- let me know if the issue persists!

@mayank

If your umbrelOS logs show an error message that reads “failed to start containers”, follow these steps:

1. Restart your Umbrel server from settings.
2. If the problem persists, connect to your Umbrel server by following the instructions in How to SSH into umbrelOS on Umbrel Home or Rasberry Pi or by accessing a terminal on your Linux machine.
3. Run the following command. If you are on a Linux machine, you may need to replace ~/umbrel with the path to your installation directory, as described in Troubleshooting on Linux:sudo ~/umbrel/scripts/stop && clean && sudo rm -f .env && sudo ~/umbrel/scripts/configure && sudo ~/umbrel/scripts/start

This will stop and reset your docker service files and then it will reboot your device, which may take several minutes.

@mayank

SSH (Secure Shell) is a way to access and control a device, such as your Umbrel server running on a Umbrel Home or Raspberry Pi, via the command line. To access Umbrel via SSH, follow these steps:

1. Open a terminal window on your computer. On macOS, you can open the Terminal app that’s installed by default on every Mac. On Windows, you can open Command Prompt or the PowerShell app.
2. Type in the following command* and press the Enter key:ssh -t umbrel@umbrel.local*In the command given above, you can replace umbrel.local with the local IP of your Umbrel if you prefer. If you are using PowerShell on Windows 10, you may need to run ssh umbrel@umbrel instead of the command given above.
3. You will then be prompted to enter your password. This is the same password you use to access your Umbrel through a browser. The default password before you have created an account on your Umbrel is moneyprintergobrrr on Raspberry Pi, and umbrel on Umbrel Home. You will not be able to see your password as you type it into the terminal. Once you have typed in your password, press the Enter key.

This will established an SSH connection to your Umbrel server. You can now begin using the command line interface to perform various actions and troubleshoot issues that require SSH.

[combat100]

@mayank

sudo rm -f .env && sudo ~/umbrel/scripts/configure && sudo ~/umbrel/scripts/start

Thanks for answer, I see this in my console

[combat100]

sudo ~/umbrel/scripts/stop && clean
but in this line: -bash: clean: command not found

[combat100]

[combat100]

Solution

1. sudo nano /etc/apache2/ports.conf

2. Change Listen 80 to 8000

[smolgrrr]

Interesting, thanks for sharing your solution @combat100