Hi guys, Sorry to bother you with another startup question, but i’m receving the “Error: system service failed” error at boot as well. My setup is a new raspberri pi 4, 8b, with a stock charger. large heatsink on top. 16gb memory and 1TB 970evoplus m2 samsung. This last ssd i purchased new today. …

I was able to get in and start syncing with this command: ssh -t umbrel@umbrel.local "rm -f ~/umbrel/statuses/update-in-progress && sudo reboot" Thanks

Some discrepancies here: You said that you have a 8GB RAM memory RPi, but shows only 4GB RAM “Mem: 3.8G 136M 3.4G 8.0M 277M 3.6G Swap: 0B 0B 0B” Then you said: “16gb memory and 1TB 970evoplus m2 samsung” And in logs shows that you are trying to use a 16GB memory USB stick? The log is very cle…

sorry for the confusion. Trying to share as much info as possible to get some results. Apperantly i dont know which PI ive purchased. that little memory card underneath the PI i used to flash the software on is the 16gb scandisk. The only storage device connected to the usb ports is a 1T samsung ss…

A few days ago, my Umbrel was turning off randomly and restarting (and sometimes refusing to power on). Then I got the “error: system service failed” screen. I reflashed the SD card to 4.7, and still got the “error: system service failed” screen. I reflashed to 4.8, and am still stuck at the same sc…

To try, because definitely is a hardware failure change power supply change SSD case change USB cable change mSD card and re-flash it with latest UmbrelOS

Ok thanks. I had already got a new approved Pi power cable and changed and re-flashed the SD card with the latest OS. I’ll order another USB cable, and if that doesn’t work, I’ll try to change the SSD case.

I just noticed that my SSD is glued to the CryptoCloaks shell without a case. The SATA to USB cable plugs directly into it. I ordered another cable to see if it helps. I also ordered yet another mSD card just in case. I hope one of those work, because I don’t know what else to try. When I plugged my…

[image] btpl21: I was able to get in and start syncing with this command: ssh -t umbrel@umbrel.local “rm -f ~/umbrel/statuses/update-in-progress && sudo reboot” Thanks It worked also for me! Many thanks buddy

@DarthCoin FYI, when the systemd service umbrel external storage mounter doesn’t fail, but the umbrel external storage updater fails, the issue is likely with the update process. This is confirmed in the logs by: [image] btpl21: Nov 15 14:51:22 umbrel external storage updater[1298]: Yes, it doe…

Thanks for pointing in the right direction. Noted. Will add this in troubleshooting manual

Error: system service failed

Support and Troubleshooting

DarthCoin September 25, 2021, 4:36pm 4

Here you have a troubleshooting guide for Umbrel

Topic		Replies	Views
Error system service failed Support and Troubleshooting	7	2076	January 25, 2024
Umbrel installation failed - "Error: System service failed" Support and Troubleshooting	8	2236	November 29, 2021
Booting problem: System service failed Support and Troubleshooting	16	2433	November 18, 2021
Error: System service failed - no restart Support and Troubleshooting	8	1602	June 6, 2023
Stuck at Starting Umbrel Support and Troubleshooting	13	6969	December 31, 2022

Error: system service failed

Related topics