I was having issues accessing Thunderhub and the nostr relay on my node and I decided to reboot it. After nothing happened for over 1hr, I tried turning the node on and off a few times, but each time, the light on the hard disk went off after a few minutes and my browser is stuck on “Starting Umbrel…

We need a log to help you. I would recommend to connect a display to your PC/PI/etc. and tell us what the linux shell want to tell us.

Thanks for getting back. I ran sudo ~/umbrel/scripts/debug Please see the logs below. The SSH is super slow and shaky and after 1 hr, it was stuck at “Docker containers”. The logs below are everything until that point: ===================== = Umbrel debug info = Umbrel version 0.5.3 Flashed OS v…

Okay, let’s have a look: From the Filesystem information we can see the following: Filesystem Size Used Avail Use% Mounted on /dev/root 29G 3.4G 25G 13% / → That’s your SD Card /dev/sda1 916G 588G 283G 68% /home/umbrel/umbrel → That’s your SSD This means that SD Card and SSD are working. I fou…

Here’s what I get with systemctl status docker ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabl Active: active (running) since Mon 2023-02-20 15:58:03 UTC; 14min ago Docs: https://docs.docker.com Main PID: …

Okay, we can see that Docker is running: Active: active (running) But we can also see that he doesn’t started the umbrel containers. otherwise the output would be longer. Im not really sure how to fix this problem without a completely fresh instal of umbrel. You can try to check if docker is run…

here’s the output of sudo apt-get upgrade docker-engine Reading package lists… Done Building dependency tree Reading state information… Done Package docker-engine is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only…

Shit, wrong package name! my fault :upside_down_face: The correct package name is docker-ce not docker-engine sudo apt-get upgrade docker-ce after the update you should do a restart of your pi. have you tried the second command from my last post?

here’s the output of sudo apt-get upgrade docker-ce E: Could not get lock /var/lib/dpkg/lock-frontend - open (11: Resource temporarily unavailable) E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), is another process using it? and here’s what happens when I run umbrel/s…

okay that’s weird! The first command should install the newest version of docker, but it was not able to do so, because there was already a lock. looks like a installation process was not able to finish it’s job which causes this deadlock. The second command shows that docker is not able to start…

Thanks. Could you point me to the instructions for a fresh install and loading a backup? Also, what would that mean for my existing lightning channels?

Hard disk not connecting

Support and Troubleshooting

rieger_san February 21, 2023, 2:27pm 12

Haven’t done this before.

But you should have a look at this:

Topic		Replies	Views
Can not access http://umbrel.local General Discussion	11	1541	July 12, 2023
Error, System service failed Support and Troubleshooting	18	915	March 16, 2022
Error: Failed to start containers, alternative solutions? Support and Troubleshooting	20	2011	March 29, 2024
Failed to Start Docker Application Container Engine Support and Troubleshooting	14	2681	May 21, 2024
Umbrel 0.4.4 stuck, then 0.4.5 stuck and no sync at all General Discussion	11	1223	November 4, 2021

Hard disk not connecting

Related topics