# Zeus LN (Mobile) **URL:** \ **Category:** Guides\ **Created:** [May 8, 2022, 6:27pm UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619 "2022-05-08T18:27:50Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![louneskmt](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/louneskmt/32/13_2.png) [@louneskmt](https://community.umbrel.com/u/louneskmt)\ **Post date:** [May 8, 2022, 6:27pm UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/1 "2022-05-08T18:27:50Z")
![logo](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/6/63e23e50fe8cac583d8c7b23f72c2b756e46d793.png) _Available for:_ Android, iOS _Official website_: [https://zeusln.app](https://zeusln.app) ## Instructions 1. Open the Zeus app on your phone. 2. Go to _ **Settings \> Nodes** _ (by clicking on the active node). 3. Click _ **+** _ to add a new node. 4. Enable _ **Use Tor** _. 5. Tap _ **Scan lndconnect config** _ and scan the _\_ QR code. 6. Tap _ **Save Node Config** _. 7. Tap _ **I understand, save my node config** _. Congratulations! You have successfully connected Zeus to your Umbrel. ---
**Author:** ![LVONM](https://avatars.discourse-cdn.com/v4/letter/l/a9adbd/32.png) [@LVONM](https://community.umbrel.com/u/LVONM)\ **Post date:** [July 25, 2022, 1:46am UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/2 "2022-07-25T01:46:04Z")
How to find the _\_ QR code in Umbrel’s new user interface: In the main Umbrel home screen, click and open Lightning Wallet In Lightning Wallet, click the three small dots in the upper-right hand corner followed by clicking “Connect Wallet” Select the _\_ QR code if it isn’t already selected. Make sure the “Use Tor” button is enabled in Zeus. ---
**Author:** ![Ravensreach](https://avatars.discourse-cdn.com/v4/letter/r/8e7dd6/32.png) [@Ravensreach](https://community.umbrel.com/u/Ravensreach)\ **Post date:** [March 23, 2023, 12:07am UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/3 "2023-03-23T00:07:04Z")
Any Idea why zeus app crashes after scanning my node ID Every single time ---
**Author:** ![Soily](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@Soily](https://community.umbrel.com/u/Soily)\ **Post date:** [May 14, 2023, 8:38am UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/4 "2023-05-14T08:38:45Z")
Doesn’t work for me. It doesn’t scan the QR Code. ![grafik](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/c/c8a393cdcceb9a627cce2cb3f6b325ab6c068295.png) Any ideas how to get rid of it? ---
**Author:** ![Bluerabbit](https://avatars.discourse-cdn.com/v4/letter/b/bbce88/32.png) [@Bluerabbit](https://community.umbrel.com/u/Bluerabbit)\ **Post date:** [June 18, 2023, 4:06am UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/5 "2023-06-18T04:06:02Z")
Same, wouldnt scan QR. I then entered the details manually and initially Zeus wouldn’t connect, however after about 5 attempts it connected. I then decided to connect Zeus to Umbrel with Tailscale using Darthcoin’s guide, basically you just replace the onion address in Host with your Tailscale IP and toggle off ‘Use Tor’. Should make for a faster and more reliable connection. > [@How to use Tailscale with Umbrel](http://community.umbrel.com/t/how-to-use-tailscale-with-umbrel/6782): > > How to connect to your Umbrel node using Tailscale Recently Umbrel added Tailscale app to its app store. What is Tailscale? [Tailscale](https://tailscale.com/) is zero config VPN that creates a secure network between your Umbrel and your other devices. Even when separated by firewalls or subnets, Tailscale just works. Tailscale will assign your Umbrel a stable IP and an auto-assigned domain that stays consistent, no matter what network your Umbrel is connected to. It’s like a local network that works everywhere. Tailsca… ---
**Author:** ![BTCJim](https://avatars.discourse-cdn.com/v4/letter/b/ba9def/32.png) [@BTCJim](https://community.umbrel.com/u/BTCJim)\ **Post date:** [October 4, 2023, 4:08am UTC](https://community.umbrel.com/t/zeus-ln-mobile/7619/6 "2023-10-04T04:08:26Z")
The QR code on Umbrel UI is very dense. Mine would not scan at first either. Try zooming in on the code (on Mac, pinch on the trackpad) to expand the QR code and then it should recognize it.