# What's the default username and password for umbrel 1.1 on linux?

**URL:** <https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729>\
**Category:** General Discussion\
**Created:** [April 30, 2024, 1:51pm UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729 "2024-04-30T13:51:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Theryston](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/theryston/32/7935_2.png) [@Theryston](https://community.umbrel.com/u/Theryston)\
**Post date:** [April 30, 2024, 1:51pm UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729/1 "2024-04-30T13:51:16Z")

</div>

I was reading the article [for boot up](https://github.com/getumbrel/umbrel/wiki/Install-umbrelOS-on-x86-systems#step-5-boot-up) my umbrel on my machine, and I know that you say “If you have a display connected to your device, you might notice the umbrel login prompt in the terminal output. This prompt is for terminal access only. To use umbrelOS, there is no need to log in via the terminal” but I need to access my terminal to configure some network infos.

So what is the default username and password on umbrel 1?

---

<div class="post-metadata">

**Author:** ![ednyfed](https://avatars.discourse-cdn.com/v4/letter/e/3ab097/32.png) [@ednyfed](https://community.umbrel.com/u/ednyfed)\
**Post date:** [April 30, 2024, 4:45pm UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729/2 "2024-04-30T16:45:58Z")

</div>

Prior to setting up the username and password via the web interface, you can use “umbrel” for both UN & PW

---

<div class="post-metadata">

**Author:** ![romanz](https://avatars.discourse-cdn.com/v4/letter/r/d26b3c/32.png) [@romanz](https://community.umbrel.com/u/romanz)\
**Post date:** [May 9, 2024, 7:01am UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729/3 "2024-05-09T07:01:43Z")

</div>

for first use without completing WWW wizard is login/password umbrel/umbrel, but after you complete WWW post installation and setup your password for access - this password is for terminal too (newly - login: umbrel, password: your password from www)

---

<div class="post-metadata">

**Author:** ![aeon](https://avatars.discourse-cdn.com/v4/letter/a/57b2e6/32.png) [@aeon](https://community.umbrel.com/u/aeon)\
**Post date:** [May 9, 2024, 9:04am UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729/4 "2024-05-09T09:04:41Z")

</div>

Thank you so much!

I was succesful after following your advice.

---

<div class="post-metadata">

**Author:** ![cimo88](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/cimo88/32/6527_2.png) [@cimo88](https://community.umbrel.com/u/cimo88)\
**Post date:** [November 20, 2024, 6:54pm UTC](https://community.umbrel.com/t/whats-the-default-username-and-password-for-umbrel-1-1-on-linux/16729/5 "2024-11-20T18:54:51Z")

</div>

It’s an terrible password. To first connect after installation on terminal.

User: umbrel  
Pass: moneyprintergobrrr

See here: [GitHub - getumbrel/umbrel-os: umbrelOS for Raspberry Pi 4 (only). Covert your Raspberry Pi into a home server in one click. For other hardware, checkout https://github.com/getumbrel/umbrel](https://github.com/getumbrel/umbrel-os)