# Upgraded my umbrel node to 0.4.10 now node is stuck

**URL:** <https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775>\
**Category:** Support and Troubleshooting\
**Created:** [January 16, 2022, 9:19pm UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775 "2022-01-16T21:19:25Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmart](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jmart](https://community.umbrel.com/u/jmart)\
**Post date:** [January 16, 2022, 9:19pm UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/1 "2022-01-16T21:19:25Z")

</div>

Hello guys,

 ![ss node](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/0/0c276f922e97a56fc44424191be5a18735c65227.png)  
I upgraded my umbrel node to 0.4.10 and now I’m stuck at 99.92 or 99.93% syncronizing.  
I tried to SSH into my node and run this command:  
rm -f ~/umbrel/statuses/update-in-progress && sudo reboot  
but doesn’t seem to have helped

I have debug logs that I’ve seen other people post. I can post the whole thing if it helps.

# Can someone please help figure out what’s wrong?

# = Umbrel debug info =

## Umbrel version

0.4.10

## Flashed OS version

v0.4.0

## Raspberry Pi Model

Revision : d03114  
Serial : 1000000035baff2f  
Model : Raspberry Pi 4 Model B Rev 1.4

## Firmware

Aug 3 2021 18:14:56  
Copyright (c) 2012 Broadcom  
version 40787ee5905644f639a2a0f6e00ae12e517a2211 (clean) (release) (start)

## Temperature

temp=47.7’C

---

<div class="post-metadata">

**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\
**Post date:** [January 16, 2022, 11:30pm UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/2 "2022-01-16T23:30:51Z")

</div>

In the Bitcoin page, do you have connected peers? If hours on did pass and no peers, you can try to do some restarts. If it persist, you should use a fixed IP. Look the guides in this site.  
I just put a reserved IP number in my router dhcp, and had no more problem to get peers. But now can only access Umbrel typiing the IP number 🤔

---

<div class="post-metadata">

**Author:** ![jmart](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jmart](https://community.umbrel.com/u/jmart)\
**Post date:** [January 17, 2022, 1:45am UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/3 "2022-01-17T01:45:53Z")

</div>

I do have peers connected but still stuck at 99.92%  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/1/16b800e94e3913672ece2f3ae5585356ebc535da.png)

---

<div class="post-metadata">

**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\
**Post date:** [January 17, 2022, 2:00am UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/4 "2022-01-17T02:00:40Z")

</div>

You need one “in”, I guess. Only suggestion I can give is to fix a IP

---

<div class="post-metadata">

**Author:** ![jmart](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jmart](https://community.umbrel.com/u/jmart)\
**Post date:** [January 17, 2022, 4:03am UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/5 "2022-01-17T04:03:41Z")

</div>

thank you. I’m a total noob and don’t know how to fix the IP.

I found this: [How to set a static IP for your Umbrel machine](http://community.umbrel.com/t/how-to-set-a-static-ip-for-your-umbrel-machine/845)

But I can’t understand the instructions. I don’t know what to do after I run this command: sudo nano /etc/dhcpcd.conf

---

<div class="post-metadata">

**Author:** ![jmart](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jmart](https://community.umbrel.com/u/jmart)\
**Post date:** [January 17, 2022, 6:14pm UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/6 "2022-01-17T18:14:29Z")

</div>

static IP didn’t help. trying to re-index the blockchain now.

---

<div class="post-metadata">

**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\
**Post date:** [January 17, 2022, 6:40pm UTC](https://community.umbrel.com/t/upgraded-my-umbrel-node-to-0-4-10-now-node-is-stuck/5775/7 "2022-01-17T18:40:49Z")

</div>

What you did? Reserve a IP in the router? Restarted RPi? Without “in” connections you can’t go on.