# Update problems

**URL:** <https://community.umbrel.com/t/update-problems/9628>\
**Category:** Support and Troubleshooting\
**Created:** [September 28, 2022, 5:33pm UTC](https://community.umbrel.com/t/update-problems/9628 "2022-09-28T17:33:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![doppiab](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@doppiab](https://community.umbrel.com/u/doppiab)\
**Post date:** [September 28, 2022, 5:33pm UTC](https://community.umbrel.com/t/update-problems/9628/1 "2022-09-28T17:33:38Z")

</div>

HI there, I have a Pine Quartz64 model A with Armbian (a version of Debian dedicated to this machine), I am unable to update my version of Umbrel. I have installed the v. 0.4.18, but when I update everything stays as it is. Can someone help me? Thank you.

---

<div class="post-metadata">

**Author:** ![Marcaday](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Marcaday](https://community.umbrel.com/u/Marcaday)\
**Post date:** [September 29, 2022, 11:16am UTC](https://community.umbrel.com/t/update-problems/9628/2 "2022-09-29T11:16:12Z")

</div>

Hey @doppiab 👋! Sorry to hear that,  
You can try to update manually to 0.5.0 using the update script  
First, connect to your machine using ssh:

> ssh -t umbrel@umbrel.local

Then you can stop umbrel properly using the stopping script:

> sudo ~/umbrel/scripts/stop

And make sure there’s no container running using:

> docker ps

If you see any containers still running, you can kill them using:

> sudo docker kill CONTAINER\_ID

(replacing CONTAINER\_ID with the ID of each container still running)  
Then you can run the update script:

> sudo ~/umbrel/scripts/update/update --repo getumbrel/umbrel#v0.5.0

You should now see in your **Dashboard \> Settings** that you are running V0.5.0 🔥

---

<div class="post-metadata">

**Author:** ![doppiab](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@doppiab](https://community.umbrel.com/u/doppiab)\
**Post date:** [September 29, 2022, 6:55pm UTC](https://community.umbrel.com/t/update-problems/9628/3 "2022-09-29T18:55:24Z")

</div>

Hi Marcaday, thank you first of all for your help. I have followed your instructions to the letter, the system has updated, but when I reboot my version is still 0.4.18 and Umbrel offers me to install 0.5.0. What can I do? 🤔

P.s.:  
Maybe some component is missing in Armbian (dedicated version of Debian) that does not allow installation?