# Unplugged During Update

**URL:** <https://community.umbrel.com/t/unplugged-during-update/10079>\
**Category:** Support and Troubleshooting\
**Created:** [November 1, 2022, 2:00am UTC](https://community.umbrel.com/t/unplugged-during-update/10079 "2022-11-01T02:00:13Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\
**Post date:** [February 9, 2024, 9:45am UTC](https://community.umbrel.com/t/unplugged-during-update/10079/7 "2024-02-09T09:45:30Z")

</div>

Hi @Renanean, if this issue has still persisted. Can you please follow these steps:

> [@Official Umbrel Troubleshooting Guide and FAQ](https://community.umbrel.com/t/official-umbrel-troubleshooting-guide-and-faq/9873/1):
>
> SSH (Secure Shell) is a way to access and control a device, such as your Umbrel server running on a Umbrel Home or Raspberry Pi, via the command line. To access Umbrel via SSH, follow these steps:
> 
> 1. Open a terminal window on your computer. On macOS, you can open the Terminal app that’s installed by default on every Mac. On Windows, you can open Command Prompt or the PowerShell app.
> 2. Type in the following command\* and press the `Enter` key:`ssh -t umbrel@umbrel.local`\*In the command given above, you can replace `umbrel.local` with the local IP of your Umbrel if you prefer. If you are using PowerShell on Windows 10, you may need to run `ssh umbrel@umbrel` instead of the command given above.
> 3. You will then be prompted to enter your password. This is the same password you use to access your Umbrel through a browser. The default password before you have created an account on your Umbrel is `moneyprintergobrrr` on Raspberry Pi, and `umbrel` on Umbrel Home. You will not be able to see your password as you type it into the terminal. Once you have typed in your password, press the `Enter` key.
> 
> This will established an SSH connection to your Umbrel server. You can now begin using the command line interface to perform various actions and troubleshoot issues that require SSH.

then run

> [@Official Umbrel Troubleshooting Guide and FAQ](https://community.umbrel.com/t/official-umbrel-troubleshooting-guide-and-faq/9873/1):
>
> Run the following command. If you are on a Linux machine, you may need to replace `~/umbrel` with the path to your installation directory, as described in _Troubleshooting on Linux_:
> 
> `sudo ~/umbrel/scripts/debug`

---

_[View the full topic](https://community.umbrel.com/t/unplugged-during-update/10079)._