# Unable to get to umbrel.locla browser view

**URL:** <https://community.umbrel.com/t/unable-to-get-to-umbrel-locla-browser-view/7461>\
**Category:** Support and Troubleshooting\
**Created:** [April 30, 2022, 11:41am UTC](https://community.umbrel.com/t/unable-to-get-to-umbrel-locla-browser-view/7461 "2022-04-30T11:41:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mance](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@mance](https://community.umbrel.com/u/mance)\
**Post date:** [April 30, 2022, 11:41am UTC](https://community.umbrel.com/t/unable-to-get-to-umbrel-locla-browser-view/7461/1 "2022-04-30T11:41:41Z")

</div>

Using Umbrel with Raspberry PI, SSD harddrive and connected to network by cable.

After power shortage I connot longer conenct through umbrel.local to get to my login. Will only get me to umbrel start. as of starting a new account.  
I am a newbie and probably did not set a static IP to the Raspberr and since then the TOR hash adress does not get me to my Umbrel login screen…

I can SSH into my umbrel with my old password on a terminal.  
But i realy would like to start GUI mode from Tor or else to be able to use my umbrel properly.

What to do?

---

<div class="post-metadata">

**Author:** ![DarthCoin](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/darthcoin/32/1628_2.png) [@DarthCoin](https://community.umbrel.com/u/DarthCoin)\
**Post date:** [April 30, 2022, 3:40pm UTC](https://community.umbrel.com/t/unable-to-get-to-umbrel-locla-browser-view/7461/2 "2022-04-30T15:40:30Z")

</div>

For any noob starting with Umbrel, first pit stop is … [the guides section of this forum](http://community.umbrel.com/c/guides/14/l/top/all).  
Is full of useful guides, troubleshooting manuals, how to etc.

In order to have a better diagnose, you need to generate, read for yourself and provide logs if you really don’t understand what is going on.  
Here is a simple guide how to generate logs:  
[http://community.umbrel.com/t/how-to-generate-debugging-logs/](http://community.umbrel.com/t/how-to-generate-debugging-logs/)

READ your logs and try to understand them. Only like that you can became a node operator.