# Unable to Get Into Raspberry Pi 4, Can't Get Past Debian/Linux 10 Umbrel ttyl Command Screen **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [July 9, 2023, 8:01pm UTC](https://community.umbrel.com/t/unable-to-get-into-raspberry-pi-4-cant-get-past-debian-linux-10-umbrel-ttyl-command-screen/13035 "2023-07-09T20:01:52Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![wil2615](https://avatars.discourse-cdn.com/v4/letter/w/90db22/32.png) [@wil2615](https://community.umbrel.com/u/wil2615)\ **Post date:** [July 9, 2023, 8:01pm UTC](https://community.umbrel.com/t/unable-to-get-into-raspberry-pi-4-cant-get-past-debian-linux-10-umbrel-ttyl-command-screen/13035/1 "2023-07-09T20:01:52Z")
Hi, I’ve setup a new Raspberry Pi 4. I booted up and installed NOOBS and flashed Umbrel onto an my SD card. I was able to set up my Umbrel account by accessing umbrel.local after booting my node up and am currently syncing the BTC blockchain. But I can’t get into my Raspberry Pi anymore since flashing Umbrel onto the SD card. It runs a bunch of commands when I boot it up and then asks for my login and password (which I never made). Problem is that it also will not let me type/won’t recognize that I have a keyboard and mouse plugged into my Pi. This is not a hardware issue because I previously used the Pi and set up everything with a plugged in Keyboard and Mouse. How do I get past this screen? I’ve already tried reflashing Umbrel over three times with no luck. ---
**Author:** ![usernameisJim](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/usernameisjim/32/3309_2.png) [@usernameisJim](https://community.umbrel.com/u/usernameisJim)\ **Post date:** [July 10, 2023, 3:02am UTC](https://community.umbrel.com/t/unable-to-get-into-raspberry-pi-4-cant-get-past-debian-linux-10-umbrel-ttyl-command-screen/13035/2 "2023-07-10T03:02:12Z")
Are you able to SSH into the new Pi 4 via another computer on the local network, and the dashboard is accessible with no issue? ---
**Author:** ![wil2615](https://avatars.discourse-cdn.com/v4/letter/w/90db22/32.png) [@wil2615](https://community.umbrel.com/u/wil2615)\ **Post date:** [July 10, 2023, 2:02pm UTC](https://community.umbrel.com/t/unable-to-get-into-raspberry-pi-4-cant-get-past-debian-linux-10-umbrel-ttyl-command-screen/13035/4 "2023-07-10T14:02:20Z")
I didn’t enable SSH on my Pi before installing umbrel but I’m not sure how/if I can enable it remotely. I have the IP of my Pi but I can’t access anything on the Pi because I’m being asked for an umbrel login. ---
**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\ **Post date:** [August 3, 2023, 1:03am UTC](https://community.umbrel.com/t/unable-to-get-into-raspberry-pi-4-cant-get-past-debian-linux-10-umbrel-ttyl-command-screen/13035/5 "2023-08-03T01:03:11Z")
you should still be able to ssh into your umbrel > ssh -t umbrel@umbrel.local > password: moneyprintergobrrr may need to do a fresh start from there