# UmbrelOS - setup on raspberry pi 5 **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [April 17, 2024, 7:57am UTC](https://community.umbrel.com/t/umbrelos-setup-on-raspberry-pi-5/16379 "2024-04-17T07:57:29Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Groom](https://avatars.discourse-cdn.com/v4/letter/g/bb73d2/32.png) [@Groom](https://community.umbrel.com/u/Groom)\ **Post date:** [April 17, 2024, 7:57am UTC](https://community.umbrel.com/t/umbrelos-setup-on-raspberry-pi-5/16379/1 "2024-04-17T07:57:29Z")
Gm Guys, I started yesterday to set up my raspberry pi 5 with umbrel OS. → I followed the steps listed on the website (flashing umbrelOS on SD Card, connecting SSD, using the right components as official power supply) → I got this screen when booting (first image) with no bootable partition → So, I decided to try other methods : 1/ install first on SD Card, Raspberry OS, and from there, installing UmbrelOS with “curl -L [https://umbrel.sh](https://umbrel.sh) | bash”. It worked well, but I was not able to update my umbrelOS to 1.0 and also when I tried to install the bitcoin app, the app installed on the SD Card and not SSD so I have been blocked as the SD card is only 32 Go. 2/ I tried the same, but directly on SSD, with no SD Card. UmbrelOS have been installed (not 1.0) and the bitcoin App was not installing. 3/ I started back again from 0, and i still got the same error message while booting. Can you help? ![IMG_9117](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/4/4f4c3a3996a8881773be41de91e219d88fc153f8.jpeg) ![IMG_9118](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/f/fd15011c63b774ea7d53aa34b5cfea272f82dcd4.jpeg) ---
**Author:** ![Groom](https://avatars.discourse-cdn.com/v4/letter/g/bb73d2/32.png) [@Groom](https://community.umbrel.com/u/Groom)\ **Post date:** [April 17, 2024, 2:15pm UTC](https://community.umbrel.com/t/umbrelos-setup-on-raspberry-pi-5/16379/2 "2024-04-17T14:15:27Z")
I finally made it! The issue was coming from the SD card and the way it was flashed with Balena Etcher. Solution : flash your SD card with Rasberry Pi Imager, → Install and run Rasberry Pi Imager → Chose your Pi model → Download on your laptop UmbrelOS 1.0 → Choose OS, use custom → select tje UmbrelOS file downloaded ---
**Author:** ![Jur](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@Jur](https://community.umbrel.com/u/Jur)\ **Post date:** [April 17, 2024, 2:45pm UTC](https://community.umbrel.com/t/umbrelos-setup-on-raspberry-pi-5/16379/3 "2024-04-17T14:45:01Z")
I encountered the same problem, did you solve it?