# umbrelOS 1.0 reads only microsd storage **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [March 18, 2024, 10:49pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596 "2024-03-18T22:49:11Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![nervologic](https://avatars.discourse-cdn.com/v4/letter/n/ee7513/32.png) [@nervologic](https://community.umbrel.com/u/nervologic)\ **Post date:** [March 18, 2024, 10:49pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/1 "2024-03-18T22:49:11Z")
I’ve just installed umbrel 1.0 on a pi4 8gb with 2tb samsung ssd, ext4 file system But i have an issue with the storage, it reads only 19.1 gb of space instead of 2tb (i suppose is the remaining space of the microsd) i’ve already tryed tho change the ssd (i have a double), reflashed the microsd and changed the cable, but i have the same issue any idea? ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 12:18am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/2 "2024-03-19T00:18:55Z")
I have the same issue, not showing the SSD Drive? Have tried changing the drive twice to other drives and still only showing SD card in the settings. When using Bitcoin Node app it is downloading to the SD Card? ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 2:06am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/3 "2024-03-19T02:06:23Z")
I tried setting up MYNODE to check out my hardware and it all worked fine. with reading the Drive. ---
**Author:** ![daryloliveira](https://avatars.discourse-cdn.com/v4/letter/d/54ee81/32.png) [@daryloliveira](https://community.umbrel.com/u/daryloliveira)\ **Post date:** [March 19, 2024, 2:13am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/4 "2024-03-19T02:13:17Z")
I have the same problem. 🥲 ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 3:38am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/5 "2024-03-19T03:38:41Z")
I should mention this is happening with the new Umbrel 1.0 using Raspberry Pi 5. ---
**Author:** ![veriwide](https://avatars.discourse-cdn.com/v4/letter/v/bbce88/32.png) [@veriwide](https://community.umbrel.com/u/veriwide)\ **Post date:** [March 19, 2024, 7:29am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/6 "2024-03-19T07:29:26Z")
I have the same problem. ---
**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\ **Post date:** [March 19, 2024, 7:32am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/7 "2024-03-19T07:32:15Z")
Hi @nervologic @whynot @daryloliveira @veriwide sorry to hear about your issue here. Just so we can look into this further, with your current set-up, can you please navigate to the settings dashboard on umbrel.local, select START under troubleshooting and share the resultant logs here. May I also ask what drive in particular you’re using with the Pi board. ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 8:11am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/8 "2024-03-19T08:11:43Z")
Thank for your email. I have attached the download of the Umbrel System and Umbrel Umbrel logs. The drive I’m using is… Crucial M.2 NVME P3 Plus. Thank you. Tony [umbrel\_system\_2024-03-19\_18-06.log](https://community.umbrel.com/uploads/short-url/cyCjiwRe1yRCMnbdNAQBMfxbajS.log) (159 KB) [umbrel\_umbrel\_2024-03-19\_18-05.log](https://community.umbrel.com/uploads/short-url/22Unk7f03CgiTkwnkJuVU8kL7fK.log) (100 KB) ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 8:13am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/9 "2024-03-19T08:13:35Z")
The files again, not sure they were sent. ---
**Author:** ![nervologic](https://avatars.discourse-cdn.com/v4/letter/n/ee7513/32.png) [@nervologic](https://community.umbrel.com/u/nervologic)\ **Post date:** [March 19, 2024, 11:00am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/10 "2024-03-19T11:00:19Z")
Hi, it is a pi4 8gb of ram, the ssd is a common samsung portable ssd T7 (the same i use with 0.5) i can’t make the log because i’ve mooved it to substitute a pi4 with 4gb of ram with umbrel 0.5 i use at work, whit 0.5 works without ssd problems I’ll try to install the 1.0 on a pi5 i already have this evening, so i can check if is a problem of the ssd ---
**Author:** ![nervologic](https://avatars.discourse-cdn.com/v4/letter/n/ee7513/32.png) [@nervologic](https://community.umbrel.com/u/nervologic)\ **Post date:** [March 19, 2024, 11:33am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/11 "2024-03-19T11:33:04Z")
This is not a real solution but… after i moved the pi4 to substitute an already working 0.5 umbrel i flashed the micro sd with the 1.0 version and now it works and it reads the disk So maybe people with the same issue can first try install 0.5 umbrel, let the os initialize the ssd, and then reflash the microsd with the 1.0 version ---
**Author:** ![stoyan22](https://avatars.discourse-cdn.com/v4/letter/s/f04885/32.png) [@stoyan22](https://community.umbrel.com/u/stoyan22)\ **Post date:** [March 19, 2024, 3:18pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/12 "2024-03-19T15:18:17Z")
I have the same problem. I had working Umbrel v0.5 on Rpi and after flashing the microSD with v1.0 it show only the SD card space. I tried with 2 SSDs. One from the v0.5 and a new one, formatted and empty. No one of them was recognize by the OS. ---
**Author:** ![GUI](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@GUI](https://community.umbrel.com/u/GUI)\ **Post date:** [March 19, 2024, 4:42pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/13 "2024-03-19T16:42:39Z")
Hey! I have the same problem here. Everything worked fine with 0.5 but since I flashed to 1.0 the only storage available is what’s left on the mSD card. The SSD Drive is not mentionned anywhere… ---
**Author:** ![Brcly](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/brcly/32/8241_2.png) [@Brcly](https://community.umbrel.com/u/Brcly)\ **Post date:** [March 19, 2024, 5:26pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/14 "2024-03-19T17:26:33Z")
Also have this issue. The Pi simply doesn’t read that the SSD is plugged in at all, despite it working fine on other PC’s, they at least detect it. ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/a/ab7113c98f235bf8a9bdc2c63f65155450f7da8f.png) ---
**Author:** ![Hans95](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hans95](https://community.umbrel.com/u/Hans95)\ **Post date:** [March 19, 2024, 7:47pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/15 "2024-03-19T19:47:11Z")
Hi smolgrrr, I have the same problem. I am using a Lexar NM620 2TB NVMe. Here are my Logs: „Sorry new Users can‘t upload attachments.“ I am sorry. ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 19, 2024, 9:49pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/16 "2024-03-19T21:49:25Z")
I would do this, but I have a RPi5 and 0.5 won’t work on 5 from what I understand. ---
**Author:** ![veriwide](https://avatars.discourse-cdn.com/v4/letter/v/bbce88/32.png) [@veriwide](https://community.umbrel.com/u/veriwide)\ **Post date:** [March 20, 2024, 5:15am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/17 "2024-03-20T05:15:04Z")
I attach my system log and umbrelOS log. It has the same problem today. [umbrel\_umbrel\_2024-03-19\_22-12.log](https://community.umbrel.com/uploads/short-url/6gq79x9IbTdUsobuOjywwAE7wjQ.log) (127 KB) [umbrel\_system\_2024-03-19\_22-12.log](https://community.umbrel.com/uploads/short-url/2vGQhbb6PyNJsi8OqyqSpuXpx1P.log) (185 KB) ---
**Author:** ![veriwide](https://avatars.discourse-cdn.com/v4/letter/v/bbce88/32.png) [@veriwide](https://community.umbrel.com/u/veriwide)\ **Post date:** [March 20, 2024, 5:19am UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/18 "2024-03-20T05:19:44Z")
[Raspberry Pi 5 8GB RAM](https://www.amazon.com/dp/B0CPWH8FL9?psc=1&ref=product_details) Case: GeeekPi Metal case for Raspberry Pi 5 SSD: WD Blue 1TB SN580 NVMe Geekworm X1001 PCIe M.2 Key-M NVMe SSD PIP PCIe Peripheral Board for Raspberry Pi 5 ---
**Author:** ![Hans95](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hans95](https://community.umbrel.com/u/Hans95)\ **Post date:** [March 20, 2024, 10:05pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/19 "2024-03-20T22:05:03Z")
Is there already a solution for this? ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 20, 2024, 10:15pm UTC](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596/20 "2024-03-20T22:15:00Z")
I don’t think so, I’m wondering the same. [Next page](https://community.umbrel.com/t/umbrelos-1-0-reads-only-microsd-storage/15596.md?page=2)