# Umbrel with Argon One how to get fan working?

**URL:** <https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493>\
**Category:** Support and Troubleshooting\
**Created:** [March 11, 2024, 11:29am UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493 "2024-03-11T11:29:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\
**Post date:** [March 11, 2024, 11:29am UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/1 "2024-03-11T11:29:15Z")

</div>

Hello, I’m working on setting up Raspberry Pi using the Argon One V2 case. If I have Umbrel on the SD card, and the Blockchain on the SSD, how do I go about getting the fan to work. Have been looking for hours and can’t find much.

---

<div class="post-metadata">

**Author:** ![Untwi](https://avatars.discourse-cdn.com/v4/letter/u/e0b2c6/32.png) [@Untwi](https://community.umbrel.com/u/Untwi)\
**Post date:** [June 10, 2024, 11:42pm UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/2 "2024-06-10T23:42:27Z")

</div>

Same Here, have you fixed ?

---

<div class="post-metadata">

**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\
**Post date:** [June 11, 2024, 4:43am UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/3 "2024-06-11T04:43:05Z")

</div>

No not fixed. I gave up on Umbrel, was issue after issue.

---

<div class="post-metadata">

**Author:** ![Untwi](https://avatars.discourse-cdn.com/v4/letter/u/e0b2c6/32.png) [@Untwi](https://community.umbrel.com/u/Untwi)\
**Post date:** [June 11, 2024, 10:02pm UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/4 "2024-06-11T22:02:32Z")

</div>

What alternative have you used ?

---

<div class="post-metadata">

**Author:** ![Untwi](https://avatars.discourse-cdn.com/v4/letter/u/e0b2c6/32.png) [@Untwi](https://community.umbrel.com/u/Untwi)\
**Post date:** [June 11, 2024, 10:28pm UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/6 "2024-06-11T22:28:24Z")

</div>

How you did?

---

<div class="post-metadata">

**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\
**Post date:** [June 14, 2024, 12:09am UTC](https://community.umbrel.com/t/umbrel-with-argon-one-how-to-get-fan-working/15493/7 "2024-06-14T00:09:18Z")

</div>

I have been looking for an alternative but as yet nothing has come up to use. So I have given up on having a node for now. The previous version of Umbrel worked really well for me, but the new one was just problems.