# Umbrel v0.4.9 installation doesn't start

**URL:** <https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199>\
**Category:** Support and Troubleshooting\
**Created:** [December 14, 2021, 6:26pm UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199 "2021-12-14T18:26:34Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![lo\_ol](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@lo\_ol](https://community.umbrel.com/u/lo_ol)\
**Post date:** [December 14, 2021, 6:26pm UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/1 "2021-12-14T18:26:34Z")

</div>

Hello,

I hope you are well

I format my Crucial MX500 SSD - CT1000MX500SSD1 - 1 To - Serial ATA - SATA 6.0 Gb/s recommended by Umbrel in ext4 (thanks to EaseUS software) in order to erase a previous Umbrel installation that failed

I was synchronising until 45% but during the night it stop and I was not able to access to umbrel.local

I did also new clean install on my microSD card of Umbrel v0.4.9 but my Raspberry Pi 4 model B - 8GB keep having a red light and no install occurs

Let me know if you have any advices  
Thanks

Io

---

<div class="post-metadata">

**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\
**Post date:** [December 15, 2021, 11:09pm UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/2 "2021-12-15T23:09:01Z")

</div>

Hi,  
I find version 4.7 is more stable than those newer. I formated everything and installed it, with no updates. I find a litlle problem with it, difficulty with Tor (re)conecting, but after some restarts it is going.

---

<div class="post-metadata">

**Author:** ![lo\_ol](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@lo\_ol](https://community.umbrel.com/u/lo_ol)\
**Post date:** [January 4, 2022, 7:45pm UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/3 "2022-01-04T19:45:26Z")

</div>

Hello,

I just try with umbrel-os-v0.4.7 and it didn’t work  
I am not lucky with this …

---

<div class="post-metadata">

**Author:** ![Hakuna](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/hakuna/32/549_2.png) [@Hakuna](https://community.umbrel.com/u/Hakuna)\
**Post date:** [January 4, 2022, 9:52pm UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/4 "2022-01-04T21:52:15Z")

</div>

[Try this](http://community.umbrel.com/t/umbrel-troubleshooting-guide/3632) for logging into your node with SSH and check  
~/umbrel/scripts/debug

provide the output via [pastebin.com](http://pastebin.com) here as a link, so we can check the logs

---

<div class="post-metadata">

**Author:** ![lo\_ol](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@lo\_ol](https://community.umbrel.com/u/lo_ol)\
**Post date:** [January 5, 2022, 8:01am UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/5 "2022-01-05T08:01:30Z")

</div>

I can’t access it via SSH

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/3/39febbe9ee11950fc06d0bd71cc85fc6a4207feb.png)

---

<div class="post-metadata">

**Author:** ![Hakuna](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/hakuna/32/549_2.png) [@Hakuna](https://community.umbrel.com/u/Hakuna)\
**Post date:** [January 5, 2022, 9:52am UTC](https://community.umbrel.com/t/umbrel-v0-4-9-installation-doesnt-start/5199/6 "2022-01-05T09:52:33Z")

</div>

Can you try to ssh to the IP instead? Seems windows doesn’t know about umbrel.local