# Umbrel issues since 0.5.0. Reflashed image several times **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [August 7, 2022, 9:24pm UTC](https://community.umbrel.com/t/umbrel-issues-since-0-5-0-reflashed-image-several-times/9003 "2022-08-07T21:24:06Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![theodosius](https://avatars.discourse-cdn.com/v4/letter/t/ce7236/32.png) [@theodosius](https://community.umbrel.com/u/theodosius)\ **Post date:** [August 7, 2022, 9:24pm UTC](https://community.umbrel.com/t/umbrel-issues-since-0-5-0-reflashed-image-several-times/9003/1 "2022-08-07T21:24:06Z")
Hi friends, I have been running umbrel for a while with the previous software before 0.5.0. It used to run fine until I updated to the 0.5.0 software. All I know is that I could not access interface. Now after reflashing a few times my umbrel is not starting at all. Also I assigned umbrel fixed ip to router but no results unfortunately. I dont know what else can I do, I have my seedphrase but unfortunately I had not done a backup of my lightning channels. Any suggestions appreciated please. Also the debug log has been pasted, Thanks guys! # ===================== = Umbrel debug info = ## Umbrel version 0.5.0 ## Flashed OS version v0.5.0 ## Raspberry Pi Model Revision : c03111 Serial : 10000000cacbc36b Model : Raspberry Pi 4 Model B Rev 1.1 ## Firmware Dec 1 2021 15:01:54 Copyright © 2012 Broadcom version 71bd3109023a0c8575585ba87cbb374d2eeb038f (clean) (release) (start) ## Temperature temp=47.7’C ## Throttling throttled=0x0 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 3.8G 148M 3.4G 8.0M 281M 3.6G Swap: 4.1G 0B 4.1G total: 3.9% system: 3.9% tor: 0% lnd: 0% electrs: 0% bitcoin: 0% ## Memory monitor logs tail: cannot open ‘/home/umbrel/umbrel/scripts/…/logs/memory-monitor.log’ for reading: No such file or directory ## Filesystem information Filesystem Size Used Avail Use% Mounted on /dev/root 29G 3.0G 25G 11% / /dev/sda1 916G 4.1G 866G 1% /home/umbrel/umbrel ## Startup service logs Jun 07 16:07:26 umbrel systemd[1]: Stopped Umbrel Startup Service. Jun 07 16:07:26 umbrel systemd[1]: Starting Umbrel Startup Service… Jun 07 16:07:26 umbrel umbrel startup[8530]: ====================================== Jun 07 16:07:26 umbrel umbrel startup[8530]: ============ CONFIGURING ============= Jun 07 16:07:26 umbrel umbrel startup[8530]: ========= UMBREL (mainnet) =========== Jun 07 16:07:26 umbrel umbrel startup[8530]: ====================================== Jun 07 16:07:26 umbrel umbrel startup[8530]: Generating auth credentials Jun 07 16:07:26 umbrel umbrel startup[8530]: Generating Tor password Jun 07 16:07:26 umbrel umbrel startup[8530]: Unable to find image ‘getumbrel/tor:v0.4.1.9’ locally Jun 07 16:07:36 umbrel umbrel startup[8530]: docker: Error response from daemon: Get “[https://registry-1.docker.io/v2/](https://registry-1.docker.io/v2/)”: dial tcp: lookup [registry-1.docker.io](http://registry-1.docker.io) on 192.168.1.109:53: read udp 192.168.1.100:46655-\>192.168.1.109:53: i/o timeout. Jun 07 16:07:36 umbrel umbrel startup[8530]: See ‘docker run --help’. Jun 07 16:07:36 umbrel systemd[1]: umbrel-startup.service: Control process exited, code=exited, status=125/n/a Jun 07 16:07:36 umbrel systemd[1]: umbrel-startup.service: Failed with result ‘exit-code’. Jun 07 16:07:36 umbrel systemd[1]: Failed to start Umbrel Startup Service. Jun 07 16:07:46 umbrel systemd[1]: umbrel-startup.service: Service RestartSec=10s expired, scheduling restart. Jun 07 16:07:46 umbrel systemd[1]: umbrel-startup.service: Scheduled restart job, restart counter is at 148. Jun 07 16:07:46 umbrel systemd[1]: Stopped Umbrel Startup Service. Jun 07 16:07:46 umbrel systemd[1]: Starting Umbrel Startup Service… Jun 07 16:07:46 umbrel umbrel startup[8727]: ====================================== Jun 07 16:07:46 umbrel umbrel startup[8727]: ============ CONFIGURING ============= Jun 07 16:07:46 umbrel umbrel startup[8727]: ========= UMBREL (mainnet) =========== Jun 07 16:07:46 umbrel umbrel startup[8727]: ====================================== Jun 07 16:07:46 umbrel umbrel startup[8727]: Generating auth credentials Jun 07 16:07:46 umbrel umbrel startup[8727]: Generating Tor password Jun 07 16:07:47 umbrel umbrel startup[8727]: Unable to find image ‘getumbrel/tor:v0.4.1.9’ locally Jun 07 16:07:57 umbrel umbrel startup[8727]: docker: Error response from daemon: Get “[https://registry-1.docker.io/v2/](https://registry-1.docker.io/v2/)”: dial tcp: lookup [registry-1.docker.io](http://registry-1.docker.io) on 192.168.1.109:53: read udp 192.168.1.100:39717-\>192.168.1.109:53: i/o timeout. Jun 07 16:07:57 umbrel umbrel startup[8727]: See ‘docker run --help’. Jun 07 16:07:57 umbrel systemd[1]: umbrel-startup.service: Control process exited, code=exited, status=125/n/a Jun 07 16:07:57 umbrel systemd[1]: umbrel-startup.service: Failed with result ‘exit-code’. Jun 07 16:07:57 umbrel systemd[1]: Failed to start Umbrel Startup Service. ## External storage service logs – Logs begin at Tue 2022-06-07 15:16:31 UTC, end at Tue 2022-06-07 16:08:03 UTC. – Jun 07 15:16:37 umbrel systemd[1]: Starting External Storage Mounter… Jun 07 15:16:37 umbrel external storage mounter[506]: Running external storage mount script… Jun 07 15:16:39 umbrel external storage mounter[506]: Found device “SanDisk SSD PLUS 1000GB” Jun 07 15:16:39 umbrel external storage mounter[506]: Blacklisting USB device IDs against UAS driver… Jun 07 15:16:39 umbrel external storage mounter[506]: Rebinding USB drivers… Jun 07 15:16:40 umbrel external storage mounter[506]: Checking USB devices are back… Jun 07 15:16:40 umbrel external storage mounter[506]: Waiting for USB devices… Jun 07 15:16:41 umbrel external storage mounter[506]: Waiting for USB devices… Jun 07 15:16:42 umbrel external storage mounter[506]: Checking if the device is ext4… Jun 07 15:16:42 umbrel external storage mounter[506]: Yes, it is ext4 Jun 07 15:16:42 umbrel external storage mounter[506]: Checking if device contains an Umbrel install… Jun 07 15:16:42 umbrel external storage mounter[506]: Yes, it contains an Umbrel install Jun 07 15:16:42 umbrel external storage mounter[506]: Bind mounting external storage over local Umbrel installation… Jun 07 15:16:42 umbrel external storage mounter[506]: Bind mounting external storage over local Docker data dir… Jun 07 15:16:42 umbrel external storage mounter[506]: Bind mounting external storage to /swap Jun 07 15:16:42 umbrel external storage mounter[506]: Bind mounting SD card root at /sd-card… Jun 07 15:16:42 umbrel external storage mounter[506]: Checking Umbrel root is now on external storage… Jun 07 15:16:44 umbrel external storage mounter[506]: Checking /var/lib/docker is now on external storage… Jun 07 15:16:44 umbrel external storage mounter[506]: Checking /swap is now on external storage… Jun 07 15:16:44 umbrel external storage mounter[506]: Setting up swapfile Jun 07 15:16:44 umbrel external storage mounter[506]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) Jun 07 15:16:44 umbrel external storage mounter[506]: no label, UUID=278be917-6659-4a84-81c6-e1ea92ac11f7 Jun 07 15:16:45 umbrel external storage mounter[506]: Checking SD Card root is bind mounted at /sd-root… Jun 07 15:16:45 umbrel external storage mounter[506]: Starting external drive mount monitor… Jun 07 15:16:45 umbrel external storage mounter[506]: Mount script completed successfully! Jun 07 15:16:45 umbrel systemd[1]: Started External Storage Mounter. ## External storage SD card update service logs – Logs begin at Tue 2022-06-07 15:16:31 UTC, end at Tue 2022-06-07 16:08:03 UTC. – Jun 07 15:16:52 umbrel systemd[1]: Starting External Storage SDcard Updater… Jun 07 15:16:52 umbrel external storage updater[961]: Checking if SD card Umbrel is newer than external storage… Jun 07 15:16:52 umbrel external storage updater[961]: No, SD version is not newer, exiting. Jun 07 15:16:52 umbrel systemd[1]: Started External Storage SDcard Updater. ## Karen logs tail: cannot open ‘logs/karen.log’ for reading: No such file or directory ## Docker containers NAMES STATUS ## Umbrel logs ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.auth.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object ## Tor logs # ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.auth.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object # ==== Result ==== The debug script did not automatically detect any issues with your Umbrel.