# Umbrel always restoring from SSD **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [March 2, 2022, 7:40pm UTC](https://community.umbrel.com/t/umbrel-always-restoring-from-ssd/6578 "2022-03-02T19:40:36Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![c\_Base](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/c_base/32/1962_2.png) [@c\_Base](https://community.umbrel.com/u/c_Base)\ **Post date:** [March 2, 2022, 7:40pm UTC](https://community.umbrel.com/t/umbrel-always-restoring-from-ssd/6578/1 "2022-03-02T19:40:36Z")
Hey, I have some issue with Umbrel. Something went wrong with the new 0.4.15 update. So I tried to install 0.4.14 again. But this will not work. Umbrel always restores the 0.4.15 someway. I flashed the SD card and in four runs I did 1. rm -rf /mnt/data/\* 2. mkfs ext4 3. shred -f -z /dev/sda1 4. pluged the SSD to Windows, erased the volume and full formatted it to NTFS After each run the debug log shows > Yes, it contains an Umbrel install > No, SD version is not newer, exiting. What should I do now? How can this happen? I mean I completely tore it to zero?! Full log: # ===================== = Umbrel debug info = ## Umbrel version 0.4.14 ## Flashed OS version v0.4.14 ## Raspberry Pi Model Revision : c03111 Serial : 10000000be1e6bd2 Model : Raspberry Pi 4 Model B Rev 1.1 ## Firmware Dec 1 2021 15:01:54 Copyright (c) 2012 Broadcom version 71bd3109023a0c8575585ba87cbb374d2eeb038f (clean) (release) (start) ## Temperature temp=30.6’C ## Throttling throttled=0x0 ## Memory usage ``` total used free shared buff/cache available Mem: 3.8G 153M 3.4G 16M 271M 3.6G Swap: 4.1G 0B 4.1G ``` total: 4.1% system: 4.1% tor: 0% lnd: 0% electrs: 0% bitcoin: 0% ## Memory monitor logs tail: cannot open ‘/home/umbrel/umbrel/scripts/../logs/memory-monitor.log’ for reading: No such file or directory ## Filesystem information Filesystem Size Used Avail Use% Mounted on /dev/root 7.0G 3.2G 3.5G 48% / /dev/sda1 916G 4.3G 866G 1% /home/umbrel/umbrel ## Startup service logs – Logs begin at Thu 2019-02-14 10:11:59 UTC, end at Wed 2022-03-02 19:15:35 UTC. – Mar 02 19:15:25 umbrel systemd[1]: Starting Umbrel Startup Service… Mar 02 19:15:25 umbrel umbrel startup[1176]: ====================================== Mar 02 19:15:25 umbrel umbrel startup[1176]: ============ CONFIGURING ============= Mar 02 19:15:25 umbrel umbrel startup[1176]: ========= UMBREL (mainnet) =========== Mar 02 19:15:25 umbrel umbrel startup[1176]: ====================================== Mar 02 19:15:25 umbrel umbrel startup[1176]: Generating auth credentials Mar 02 19:15:25 umbrel umbrel startup[1176]: Generating Tor password Mar 02 19:15:29 umbrel umbrel startup[1176]: Unable to find image ‘getumbrel/tor:v0.4.1.9’ locally ## External storage service logs – Logs begin at Thu 2019-02-14 10:11:59 UTC, end at Wed 2022-03-02 19:15:35 UTC. – Mar 02 19:14:18 umbrel systemd[1]: Starting External Storage Mounter… Mar 02 19:14:18 umbrel external storage mounter[536]: Running external storage mount script… Mar 02 19:14:26 umbrel external storage mounter[536]: Found device “ASMT 2115” Mar 02 19:14:26 umbrel external storage mounter[536]: Blacklisting USB device IDs against UAS driver… Mar 02 19:14:27 umbrel external storage mounter[536]: Rebinding USB drivers… Mar 02 19:14:27 umbrel external storage mounter[536]: Checking USB devices are back… Mar 02 19:14:27 umbrel external storage mounter[536]: Waiting for USB devices… Mar 02 19:14:28 umbrel external storage mounter[536]: Waiting for USB devices… Mar 02 19:14:29 umbrel external storage mounter[536]: Checking if the device is ext4… Mar 02 19:14:36 umbrel external storage mounter[536]: Yes, it is ext4 Mar 02 19:14:36 umbrel external storage mounter[536]: Checking if device contains an Umbrel install… Mar 02 19:14:36 umbrel external storage mounter[536]: Yes, it contains an Umbrel install Mar 02 19:14:36 umbrel external storage mounter[536]: Bind mounting external storage over local Umbrel installation… Mar 02 19:14:36 umbrel external storage mounter[536]: Bind mounting external storage over local Docker data dir… Mar 02 19:14:36 umbrel external storage mounter[536]: Bind mounting external storage to /swap Mar 02 19:14:36 umbrel external storage mounter[536]: Bind mounting SD card root at /sd-card… Mar 02 19:14:36 umbrel external storage mounter[536]: Checking Umbrel root is now on external storage… Mar 02 19:15:15 umbrel external storage mounter[536]: Checking /var/lib/docker is now on external storage… Mar 02 19:15:15 umbrel external storage mounter[536]: Checking /swap is now on external storage… Mar 02 19:15:15 umbrel external storage mounter[536]: Setting up swapfile Mar 02 19:15:15 umbrel external storage mounter[536]: rm: cannot remove ‘/swap/swapfile’: No such file or directory Mar 02 19:15:15 umbrel external storage mounter[536]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) Mar 02 19:15:15 umbrel external storage mounter[536]: no label, UUID=f9ba0f29-3ab6-42ff-b93a-5cab27f2f33e Mar 02 19:15:15 umbrel external storage mounter[536]: Checking SD Card root is bind mounted at /sd-root… Mar 02 19:15:15 umbrel external storage mounter[536]: Starting external drive mount monitor… Mar 02 19:15:15 umbrel external storage mounter[536]: Mount script completed successfully! Mar 02 19:15:15 umbrel systemd[1]: Started External Storage Mounter. ## External storage SD card update service logs – Logs begin at Thu 2019-02-14 10:11:59 UTC, end at Wed 2022-03-02 19:15:35 UTC. – Mar 02 19:15:24 umbrel systemd[1]: Starting External Storage SDcard Updater… Mar 02 19:15:25 umbrel external storage updater[1098]: Checking if SD card Umbrel is newer than external storage… Mar 02 19:15:25 umbrel external storage updater[1098]: No, SD version is not newer, exiting. Mar 02 19:15:25 umbrel systemd[1]: Started External Storage SDcard Updater. ## Karen logs tail: cannot open ‘logs/karen.log’ for reading: No such file or directory ## Docker containers NAMES STATUS ## Umbrel logs ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.bitcoin.ports contains an invalid type, it should be a number, or an object services.electrs.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object services.lnd.ports value [‘9735:9735’, ‘:’, ‘:’] has non-unique elements ## Bitcoin Core logs ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.bitcoin.ports contains an invalid type, it should be a number, or an object services.electrs.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object services.lnd.ports value [‘9735:9735’, ‘:’, ‘:’] has non-unique elements ## LND logs ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.bitcoin.ports contains an invalid type, it should be a number, or an object services.electrs.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object services.lnd.ports value [‘9735:9735’, ‘:’, ‘:’] has non-unique elements ## electrs logs ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.bitcoin.ports contains an invalid type, it should be a number, or an object services.electrs.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object services.lnd.ports value [‘9735:9735’, ‘:’, ‘:’] has non-unique elements ## Tor logs # ERROR: The Compose file ‘./docker-compose.yml’ is invalid because: networks.default.ipam.config.subnet is invalid: should use the CIDR format services.tor\_proxy.ports contains an invalid type, it should be a number, or an object services.bitcoin.ports contains an invalid type, it should be a number, or an object services.electrs.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.lnd.ports contains an invalid type, it should be a number, or an object services.nginx.ports contains an invalid type, it should be a number, or an object services.lnd.ports value [‘9735:9735’, ‘:’, ‘:’] has non-unique elements # ==== Result ==== The debug script did not automatically detect any issues with your Umbrel. ---
**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\ **Post date:** [March 2, 2022, 10:19pm UTC](https://community.umbrel.com/t/umbrel-always-restoring-from-ssd/6578/2 "2022-03-02T22:19:32Z")
To do a new install, you must exclude all partitions on SSD. You can use “disk management” of Windows to do that. Umbrel will create needed partitions and format them. It is not possible downgrade Umbrel flashing SD. ---
**Author:** ![c\_Base](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/c_base/32/1962_2.png) [@c\_Base](https://community.umbrel.com/u/c_Base)\ **Post date:** [March 3, 2022, 7:19am UTC](https://community.umbrel.com/t/umbrel-always-restoring-from-ssd/6578/3 "2022-03-03T07:19:26Z")
seems so. But this saved my 🍑 ``` cd ~/umbrel && sudo ./scripts/update/update --repo getumbrel/umbrel#v0.4.14 ``` Now Umbrel is working again 🥵