# Trouble Updating Umbrel Home from version 0.5.3 to version 1.0.0

**URL:** <https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290>\
**Category:** Support and Troubleshooting\
**Created:** [September 22, 2024, 8:19pm UTC](https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290 "2024-09-22T20:19:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Journey](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Journey](https://community.umbrel.com/u/Journey)\
**Post date:** [September 22, 2024, 8:19pm UTC](https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290/1 "2024-09-22T20:19:54Z")

</div>

![Reset Umbrel](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/0/001fb5112be790eecfc02afb745d6af74a260fff.png)  
 ![umbrel.local](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/2/289b6b0b782e9664181fce5a3bb210331b86337b.png)

Hi All - I’m trying to update my **Umbrel Home** from version 0.5.3 to version 1.0.0; however, it is stuck on “Starting Update…”.

I tried [the steps in this link](https://community.umbrel.com/t/umbrel-home-sitting-20-done-for-1-0-upgrade/15590/30) to factory reset my **Umbrel Home**.

First I reset the Umbrel Home using the command (screenshot attached):

However, I am getting stuck; after I insert the flashed USB into the Umbel and turn it back on, the Umbrel does not automatically reflash and turn off; the device just stays on and keeps running.

When I go to umbrel.local, there is an error (see attached).

Any advice is much appreciated.

Thank you in advance.

---

<div class="post-metadata">

**Author:** ![denny](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/denny/32/6330_2.png) [@denny](https://community.umbrel.com/u/denny)\
**Post date:** [September 22, 2024, 9:04pm UTC](https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290/2 "2024-09-22T21:04:23Z")

</div>

Do you have a second USB stick in the Umbrel Home? You should only use the flashed USB stick.

---

<div class="post-metadata">

**Author:** ![Journey](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@Journey](https://community.umbrel.com/u/Journey)\
**Post date:** [September 22, 2024, 11:39pm UTC](https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290/3 "2024-09-22T23:39:37Z")

</div>

Hi Denny - I only have the flashed USB in the Umbrel Home. Was just pointing out that the flashed USB stick is not doing the reset.

---

<div class="post-metadata">

**Author:** ![denny](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/denny/32/6330_2.png) [@denny](https://community.umbrel.com/u/denny)\
**Post date:** [September 23, 2024, 10:40pm UTC](https://community.umbrel.com/t/trouble-updating-umbrel-home-from-version-0-5-3-to-version-1-0-0/19290/4 "2024-09-23T22:40:11Z")

</div>

Strange. It should actually work as described in the link. Have you tried using a different USB stick?

Which Umbrel Home do you have? The 2023 model or the current one?