# Tailscale and v0.5.1

**URL:** <https://community.umbrel.com/t/tailscale-and-v0-5-1/8736>\
**Category:** Support and Troubleshooting\
**Created:** [July 15, 2022, 10:00pm UTC](https://community.umbrel.com/t/tailscale-and-v0-5-1/8736 "2022-07-15T22:00:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jumpingjack](https://avatars.discourse-cdn.com/v4/letter/j/dbc845/32.png) [@jumpingjack](https://community.umbrel.com/u/jumpingjack)\
**Post date:** [July 15, 2022, 10:00pm UTC](https://community.umbrel.com/t/tailscale-and-v0-5-1/8736/1 "2022-07-15T22:00:22Z")

</div>

Anyone else having issues with Tailscale on 0.5.1? After the update restarted my Umbrel it was stuck on starting, I removed it and attempted a reinstall but never get past installing.

---

<div class="post-metadata">

**Author:** ![paybitcoinonline](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@paybitcoinonline](https://community.umbrel.com/u/paybitcoinonline)\
**Post date:** [July 17, 2022, 8:46am UTC](https://community.umbrel.com/t/tailscale-and-v0-5-1/8736/2 "2022-07-17T08:46:56Z")

</div>

I’m running in a Proxmox container and gave up trying to get it to work with the GUI. I installed it directly to the container after following these instructions from Tailscale - [https://tailscale.com/kb/1130/lxc-unprivileged/](https://tailscale.com/kb/1130/lxc-unprivileged/)

---

<div class="post-metadata">

**Author:** ![inna](https://avatars.discourse-cdn.com/v4/letter/i/8e8cbc/32.png) [@inna](https://community.umbrel.com/u/inna)\
**Post date:** [July 20, 2022, 12:08am UTC](https://community.umbrel.com/t/tailscale-and-v0-5-1/8736/3 "2022-07-20T00:08:55Z")

</div>

Yes, same result here. I’m running on Ubuntu on PC, what’s your setup?

---

<div class="post-metadata">

**Author:** ![armstrys](https://avatars.discourse-cdn.com/v4/letter/a/eada6e/32.png) [@armstrys](https://community.umbrel.com/u/armstrys)\
**Post date:** [July 20, 2022, 8:17pm UTC](https://community.umbrel.com/t/tailscale-and-v0-5-1/8736/4 "2022-07-20T20:17:36Z")

</div>

Unfortunately I doubt this is super helpful, but I was also having issues with Tailscale not starting after upgrading from 5.0 to 5.1. A clean reinstall fixed the problem and it all seems to be working. Of course that’s less than ideal, only did a reinstall to change external hard drives