# Suddenly cannot reach umbrel.local any more **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [December 25, 2022, 11:40am UTC](https://community.umbrel.com/t/suddenly-cannot-reach-umbrel-local-any-more/10794 "2022-12-25T11:40:13Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![JELI](https://avatars.discourse-cdn.com/v4/letter/j/848f3c/32.png) [@JELI](https://community.umbrel.com/u/JELI)\ **Post date:** [January 2, 2023, 10:57am UTC](https://community.umbrel.com/t/suddenly-cannot-reach-umbrel-local-any-more/10794/3 "2023-01-02T10:57:55Z")
Hello @Synicasm, Thank you for your reply. I’ve followed these instructions from @DarthCoin: > [@Unable to access Umbrel.local](http://community.umbrel.com/t/unable-to-access-umbrel-local/588/4): > > What OS are you using to access your node? Windows, Mac, Linux ? Open a terminal on your computer and enter ssh umbrel@umbrel.local , the password is is your personal user password. If it’s a fresh install (i.e. you haven’t set your password yet), or if you re-flashed Umbrel OS, then the default password is moneyprintergobrrr . From there follow the instructions for changing the IP of the node. Configure the static IP address for the Pi, the gateway path and a DNS server. The configuration … My browser can now connect via umbrel.local again. Still Specter Desktop can’t connect to node. I’ve uninstalled Specter Desktop on my desktop and installed Specter Desktop on my Umbrel. So, for now, my issues are solved. --- _[View the full topic](https://community.umbrel.com/t/suddenly-cannot-reach-umbrel-local-any-more/10794)._