# Stuck on Running Umbrel migrations **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [June 23, 2023, 5:02pm UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850 "2023-06-23T17:02:25Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![farl](https://avatars.discourse-cdn.com/v4/letter/f/e47774/32.png) [@farl](https://community.umbrel.com/u/farl)\ **Post date:** [June 23, 2023, 5:02pm UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/1 "2023-06-23T17:02:25Z")
> [@usernameisJim](#): > > _ **Edit: If anyone stumbles upon this post,** _ > > _**Here are detailed steps on help with resolving the error: [Starting New Services, Running Migrations, or Stuck Starting/Failed Update Screens](https://community.umbrel.com/t/starting-new-services-running-migrations-or-stuck-starting-failed-updates/13299)**_ > > _Feel free to ping me or reply in thread- or reach out via any of Umbrel’s official support avenues if any issue persists: [https://www.umbrel.com/support](https://www.umbrel.com/support)_ Hello, I checked for update and started the update process. But now the node is stuck on “Running Umbrel migrations…” There is a clear message on the bottom that I cannot refresh the window of power off the node. But I have been waiting for 2 hours now. What to do? ![Scherm­afbeelding 2023-06-23 om 19.00.24](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/2/2a9e66045a5febbe6ae9c2dcfbbed3b420401e42.jpeg) Any ideas? Kind regards, Farl ---
**Author:** ![lukechilds](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/lukechilds/32/4381_2.png) [@lukechilds](https://community.umbrel.com/u/lukechilds)\ **Post date:** [June 24, 2023, 10:11am UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/2 "2023-06-24T10:11:40Z")
Hey @farl sorry to hear about your issue. Do you use Telegram or some other kind of instant messenger so I can walk through some debug steps with you in realtime? You can message me at [https://t.me/lukechilds](https://t.me/lukechilds) ---
**Author:** ![mafzaal](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/mafzaal/32/4356_2.png) [@mafzaal](https://community.umbrel.com/u/mafzaal)\ **Post date:** [June 30, 2023, 2:49am UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/3 "2023-06-30T02:49:00Z")
I’m facing same which, could you please share the steps to debug or fix the issue? ---
**Author:** ![farl](https://avatars.discourse-cdn.com/v4/letter/f/e47774/32.png) [@farl](https://community.umbrel.com/u/farl)\ **Post date:** [July 1, 2023, 8:39am UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/4 "2023-07-01T08:39:09Z")
Thank you, I have contacted you on Telegram. And thank you for your help there Luke! Seems like my SD card run out of storage. I needed to reflash the SD card with the new UmbrelOS. ---
**Author:** ![usernameisJim](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/usernameisjim/32/3309_2.png) [@usernameisJim](https://community.umbrel.com/u/usernameisJim)\ **Post date:** [July 1, 2023, 11:07pm UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/5 "2023-07-01T23:07:05Z")
Hey @mafzaal It’s due to a MicroSD card issue running out of room > The most reliable fix for this issue if you are on the Raspberry Pi 4 platform is to reflash your MicroSD card. If you have another one you can swap in, please try another card as well in case you have a failing card > SSH and run this command to safely shutdown: `sudo shutdown` > Unplug power and reflash your MicroSD card, then when complete plug in your power last and wait ~5 minutes > For reference, reflashing will not result in any data loss because all data is stored on your external storage drive (SSD or HDD). > **To reflash your MicroSD card, follow the steps on the website under [“Install on a Rasberry Pi 4.”](https://umbrel.com/#start)** ---
**Author:** ![mafzaal](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/mafzaal/32/4356_2.png) [@mafzaal](https://community.umbrel.com/u/mafzaal)\ **Post date:** [July 2, 2023, 2:24pm UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/6 "2023-07-02T14:24:21Z")
Thank you @usernameisJim your steps worked. Did Umbrel 0.5.4 update work after re-flashing? ---
**Author:** ![usernameisJim](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/usernameisjim/32/3309_2.png) [@usernameisJim](https://community.umbrel.com/u/usernameisJim)\ **Post date:** [July 2, 2023, 10:39pm UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/7 "2023-07-02T22:39:35Z")
when you reflash it does run through an automatic update so it’s safe to flash to most recent version even if you’re on the old one ---
**Author:** ![usernameisJim](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/usernameisjim/32/3309_2.png) [@usernameisJim](https://community.umbrel.com/u/usernameisJim)\ **Post date:** [October 25, 2023, 12:14am UTC](https://community.umbrel.com/t/stuck-on-running-umbrel-migrations/12850/8 "2023-10-25T00:14:04Z")
_ **If anyone stumbles upon this post,** _ _**Here are detailed steps on help with resolving the error: [Starting New Services, Running Migrations, or Stuck Starting/Failed Update Screens](https://community.umbrel.com/t/starting-new-services-running-migrations-or-stuck-starting-failed-updates/13299)**_ _Feel free to ping me or reply in thread- or reach out via any of Umbrel’s official support avenues if any issue persists: [https://www.umbrel.com/support](https://www.umbrel.com/support)_