# Running a VPN node and Umbrel on same network **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [September 27, 2023, 3:11am UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760 "2023-09-27T03:11:36Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![RyukenKai](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ryukenkai/32/4705_2.png) [@RyukenKai](https://community.umbrel.com/u/RyukenKai)\ **Post date:** [September 27, 2023, 3:11am UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/1 "2023-09-27T03:11:36Z")
Would running a VPN node prevent Umbrel from functioning correctly? I started with Umbrel on 0.5.3 on Raspberry Pi, It ran fine, I was able to install and sync the Bitcoin Node. Had my LN Node running just fine. Started running a Mysterium VPN node on the same network, everything still worked fine. Then auto-updated through the umbrel.local interface to 0.5.4. Then one day out of the blue I wasn’t able to install apps. Tried re-installing Umbrel OS on my SD card it came back up just fine still not able to install apps. Turned off my VPN Node to see if that was the problem, was still not able to install any apps. Thought a clean, full, reformat and reinstall would fix the problem. Backed up my LN node settings and the one channel that was stuck in Opening limbo because I was dumb with the channel size fee calculation. Reformatted and Reinstalled everything. Booted up just fine was able to sign into my same umbrel account and went to install the Bitcoin Node to start the long wait of the syncing blockchain and can’t even install the Bitcoin Node now. Nothing installs can’t even install apps via ssh. Now I just want my Sats back. I was able to restore my “On Chain” wallet with the Blue Wallet phone app but of course it’s Zeroed out from me trying to fix opening channel in limbo, and I can’t get back into my LN node to even try to attempt fixing all my rookie mistakes. Please help. Even if I can’t get my Sats back, knowing what went wrong would be useful for when try again. At this point I can’t even start over from rock bottom. ---
**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\ **Post date:** [September 27, 2023, 12:07pm UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/2 "2023-09-27T12:07:34Z")
It shouldn’t cause any issues, but sometimes VPNs can make weird altercations to the network your Umbrel is on, i.e. Mullvad has an option to enable/disable ‘local network sharing’ If possible can you please try installing an app, and then assuming it doesn’t install, go to the settings tab and press ‘START’ under troubleshooting. You can download that log and attach it in a reply here. This will help us diagnose the specific issue. ---
**Author:** ![RyukenKai](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ryukenkai/32/4705_2.png) [@RyukenKai](https://community.umbrel.com/u/RyukenKai)\ **Post date:** [September 28, 2023, 11:48pm UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/4 "2023-09-28T23:48:25Z")
2nd try ## Startup service logs Sep 24 16:47:40 umbrel umbrel startup[980]: ====================================== Sep 24 16:47:40 umbrel umbrel startup[980]: ============= STARTING =============== Sep 24 16:47:40 umbrel umbrel startup[980]: ============== UMBREL ================ Sep 24 16:47:40 umbrel umbrel startup[980]: ====================================== Sep 24 16:47:40 umbrel umbrel startup[980]: Setting environment variables… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting karen… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting status monitors… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting memory monitor… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting backup monitor… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting decoy backup trigger… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting umbreld… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting Docker services… Sep 24 16:47:43 umbrel umbrel startup[980]: Creating network “umbrel\_main\_network” with the default driver Sep 24 16:47:50 umbrel umbrel startup[980]: Creating dashboard … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating manager … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating tor\_proxy … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating auth … Sep 24 16:48:05 umbrel umbrel startup[980]: Creating tor\_proxy … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating dashboard … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating manager … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating nginx … Sep 24 16:48:06 umbrel umbrel startup[980]: Creating auth … done Sep 24 16:48:07 umbrel umbrel startup[980]: Creating nginx … done Sep 24 16:48:07 umbrel umbrel startup[980]: Removing status server iptables entry… Sep 24 16:48:07 umbrel umbrel startup[980]: Removed existing iptables entry. Sep 24 16:48:07 umbrel umbrel startup[980]: Starting installed apps… Sep 24 16:48:07 umbrel umbrel startup[980]: Umbrel is now accessible at Sep 24 16:48:07 umbrel umbrel startup[980]: [http://umbrel.local](http://umbrel.local) Sep 24 16:48:07 umbrel umbrel startup[980]: [http://10.2.10.123](http://10.2.10.123) Sep 24 16:48:07 umbrel systemd[1]: Started Umbrel Startup Service. ## External storage service logs Sep 24 16:47:23 umbrel external storage mounter[481]: Running external storage mount script… Sep 24 16:47:23 umbrel external storage mounter[481]: Found device "SABRENT " Sep 24 16:47:23 umbrel external storage mounter[481]: Blacklisting USB device IDs against UAS driver… Sep 24 16:47:23 umbrel external storage mounter[481]: Rebinding USB drivers… Sep 24 16:47:23 umbrel external storage mounter[481]: Checking USB devices are back… Sep 24 16:47:23 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:24 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:25 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:26 umbrel external storage mounter[481]: Checking if the device is ext4… Sep 24 16:47:26 umbrel external storage mounter[481]: Yes, it is ext4 Sep 24 16:47:26 umbrel external storage mounter[481]: Checking filesystem for corruption… Sep 24 16:47:26 umbrel external storage mounter[481]: e2fsck 1.44.5 (15-Dec-2018) Sep 24 16:47:27 umbrel external storage mounter[481]: umbrel: clean, 81675/61054976 files, 5497001/244190208 blocks Sep 24 16:47:27 umbrel external storage mounter[481]: Mounting partition… Sep 24 16:47:27 umbrel external storage mounter[481]: Checking if device contains an Umbrel install… Sep 24 16:47:27 umbrel external storage mounter[481]: Yes, it contains an Umbrel install Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage over local Umbrel installation… Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage over local Docker data dir… Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage to /swap Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting SD card root at /sd-card… Sep 24 16:47:27 umbrel external storage mounter[481]: Checking Umbrel root is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Checking /var/lib/docker is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Checking /swap is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Setting up swapfile Sep 24 16:47:28 umbrel external storage mounter[481]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) Sep 24 16:47:28 umbrel external storage mounter[481]: no label, UUID=95aa11c6-f9cd-4885-a993-c428d568cda7 Sep 24 16:47:28 umbrel external storage mounter[481]: Checking SD Card root is bind mounted at /sd-root… Sep 24 16:47:28 umbrel external storage mounter[481]: Starting external drive mount monitor… Sep 24 16:47:28 umbrel external storage mounter[481]: Mount script completed successfully! Sep 24 16:47:28 umbrel systemd[1]: Started External Storage Mounter. ## External storage SD card update service logs – Logs begin at Sun 2023-09-24 16:47:17 UTC, end at Thu 2023-09-28 23:37:11 UTC. – Sep 24 16:47:40 umbrel systemd[1]: Starting External Storage SDcard Updater… Sep 24 16:47:40 umbrel external storage updater[903]: Checking if SD card Umbrel is newer than external storage… Sep 24 16:47:40 umbrel external storage updater[903]: No, SD version is not newer, exiting. Sep 24 16:47:40 umbrel systemd[1]: Started External Storage SDcard Updater. ## Karen logs Deriving keys… Creating backup… Adding random padding… 1+0 records in 1+0 records out 6676 bytes (6.7 kB, 6.5 KiB) copied, 0.000289644 s, 23.0 MB/s Creating encrypted tarball… backup/ backup/.padding Uploading backup… % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed # 0 0 0 0 0 0 0 0 --:–:-- --:–:-- --:–:-- 0 0 0 0 0 0 0 0 0 --:–:-- --:–:-- --:–:-- 0 100 7334 100 146 100 7188 83 4133 0:00:01 0:00:01 --:–:-- 4214 100 7334 100 146 100 7188 83 4131 0:00:01 0:00:01 --:–:-- 4214 {“message”:“Successfully uploaded backup 1695934024805.tar.gz.pgp for backup ID 18ab908f13a931739c29db44e3bdeae2a47748eb3b7dd21378db9c12a28251a1”} # ====== Backup success ======= Got signal: app-install-bitcoin karen is getting triggered! Installing ‘bitcoin’ from: [GitHub - getumbrel/umbrel-apps: The official app repository of the Umbrel App Store. Submit apps and updates here. Learn how → https://github.com/getumbrel/umbrel-apps#readme](https://github.com/getumbrel/umbrel-apps.git) Setting up data dir for app bitcoin… sending incremental file list sent 378 bytes received 18 bytes 792.00 bytes/sec total size is 13,135 speedup is 33.17 Pulling images for app bitcoin… Pulling app\_proxy … Pulling i2pd\_daemon … Pulling bitcoind … Pulling server … Pulling tor … Pulling bitcoind … pulling from lncm/bitcoind Pulling tor … error Pulling app\_proxy … error Pulling server … error Pulling bitcoind … digest: sha256:fad11d4874f1c2dc43… Pulling bitcoind … status: image is up to date for l… Pulling bitcoind … done Pulling i2pd\_daemon … pulling from purplei2p/i2pd ERROR: for tor Get “[https://registry-1.docker.io/v2/getumbrel/tor/manifests/sha256:2ace83f22501f58857fa9b403009f595137fa2e7986c4fda79d82a8119072b6a](https://registry-1.docker.io/v2/getumbrel/tor/manifests/sha256:2ace83f22501f58857fa9b403009f595137fa2e7986c4fda79d82a8119072b6a)”: Get “[https://auth.docker.io/token?scope=repository%3Agetumbrel%2Ftor%3Apull&service=registry.docker.io](https://auth.docker.io/token?scope=repository%3Agetumbrel%2Ftor%3Apull&service=registry.docker.io)”: dial tcp [2600:1f18:2148:bc01:a3b0:6734:c617:7c5c]:443: connect: network is unreachable ERROR: for app\_proxy Get “[https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:a2e3e0ddfcf84838bf0ba66f4b839ec958832d51f0ac9ace47962459c838b2d6](https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:a2e3e0ddfcf84838bf0ba66f4b839ec958832d51f0ac9ace47962459c838b2d6)”: Get “[https://auth.docker.io/token?scope=repository%3Agetumbrel%2Fapp-proxy%3Apull&service=registry.docker.io](https://auth.docker.io/token?scope=repository%3Agetumbrel%2Fapp-proxy%3Apull&service=registry.docker.io)”: dial tcp [2600:1f18:2148:bc02:cfd8:db68:ea1f:277c]:443: connect: network is unreachable ERROR: for server Get “[https://registry-1.docker.io/v2/getumbrel/umbrel-bitcoin/manifests/sha256:edc0567efeadf30128313308e2dadbfaa1f339ce666579646c3b9353834bb888](https://registry-1.docker.io/v2/getumbrel/umbrel-bitcoin/manifests/sha256:edc0567efeadf30128313308e2dadbfaa1f339ce666579646c3b9353834bb888)”: Get “[https://auth.docker.io/token?scope=repository%3Agetumbrel%2Fumbrel-bitcoin%3Apull&service=registry.docker.io](https://auth.docker.io/token?scope=repository%3Agetumbrel%2Fumbrel-bitcoin%3Apull&service=registry.docker.io)”: dial tcp [2600:1f18:2148:bc02:cfd8:db68:ea1f:277c]:443: connect: network is unreachable ERROR: for i2pd\_daemon Get “[https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:ea49872cb6ab90257172a03d2a8f77ca0c62bb7c438fe77a5080d50cbd9f7651](https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:ea49872cb6ab90257172a03d2a8f77ca0c62bb7c438fe77a5080d50cbd9f7651)”: dial tcp [2600:1f18:2148:bc02:cfd8:db68:ea1f:277c]:443: connect: network is unreachable Get “[https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:ea49872cb6ab90257172a03d2a8f77ca0c62bb7c438fe77a5080d50cbd9f7651](https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:ea49872cb6ab90257172a03d2a8f77ca0c62bb7c438fe77a5080d50cbd9f7651)”: dial tcp [2600:1f18:2148:bc02:cfd8:db68:ea1f:277c]:443: connect: network is unreachable Got signal: debug karen is getting triggered! ## Docker containers NAMES STATUS nginx Up 4 days auth Up 4 days manager Up 4 days tor\_proxy Up 4 days dashboard Up 4 days ## Umbrel logs Attaching to manager manager | path: ‘/statuses/remote-tor-access-status.json’ manager | } manager | Unable to get remote tor access status manager | /v1/system/remote-tor-access-status manager | NodeError: Unable to get remote tor access status manager | at Object.getRemoteTorAccessStatus (/app/logic/system.js:234:15) manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:07 GMT] “GET /v1/system/remote-tor-access-status HTTP/1.0” 500 40 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:07 GMT] “GET /v1/system/info HTTP/1.0” 200 671 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:07 GMT] “GET /v1/system/uptime HTTP/1.0” 200 6 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:07 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:07 GMT] “GET /v1/apps HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:08 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:10 GMT] “POST /v1/system/debug HTTP/1.0” 200 17 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Thu, 28 Sep 2023 23:38:11 GMT] “GET /v1/system/debug-result HTTP/1.0” 200 23 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager ## Tor Proxy logs # Attaching to tor\_proxy tor\_proxy | Sep 28 10:48:07.000 [notice] Heartbeat: Tor’s uptime is 3 days 18:00 hours, with 0 circuits open. I’ve sent 4.82 MB and received 19.64 MB. I’ve received 13 connections on IPv4 and 0 on IPv6. I’ve made 93 connections with IPv4 and 0 with IPv6. tor\_proxy | Sep 28 10:48:07.000 [notice] While bootstrapping, fetched this many bytes: 706591 (consensus network-status fetch); 14104 (authority cert fetch); 12481063 (microdescriptor fetch) tor\_proxy | Sep 28 10:48:07.000 [notice] While not bootstrapping, fetched this many bytes: 753093 (consensus network-status fetch); 36571 (authority cert fetch); 1395903 (microdescriptor fetch) tor\_proxy | Sep 28 16:48:07.000 [notice] Heartbeat: Tor’s uptime is 4 days 0:00 hours, with 0 circuits open. I’ve sent 5.00 MB and received 20.12 MB. I’ve received 14 connections on IPv4 and 0 on IPv6. I’ve made 98 connections with IPv4 and 0 with IPv6. tor\_proxy | Sep 28 16:48:07.000 [notice] While bootstrapping, fetched this many bytes: 706591 (consensus network-status fetch); 14104 (authority cert fetch); 12481063 (microdescriptor fetch) tor\_proxy | Sep 28 16:48:07.000 [notice] While not bootstrapping, fetched this many bytes: 787514 (consensus network-status fetch); 36571 (authority cert fetch); 1655556 (microdescriptor fetch) tor\_proxy | Sep 28 19:20:30.000 [warn] Received http status code 404 (“Not found”) from server 173.232.194.20:8443 while fetching “/tor/keys/fp/EFCBE720AB3A82B99F9E953CD5BF50F7EEFC7B97”. tor\_proxy | Sep 28 22:48:07.000 [notice] Heartbeat: Tor’s uptime is 4 days 6:00 hours, with 0 circuits open. I’ve sent 5.41 MB and received 20.80 MB. I’ve received 16 connections on IPv4 and 0 on IPv6. I’ve made 105 connections with IPv4 and 0 with IPv6. tor\_proxy | Sep 28 22:48:07.000 [notice] While bootstrapping, fetched this many bytes: 706591 (consensus network-status fetch); 14104 (authority cert fetch); 12481063 (microdescriptor fetch) tor\_proxy | Sep 28 22:48:07.000 [notice] While not bootstrapping, fetched this many bytes: 834991 (consensus network-status fetch); 36634 (authority cert fetch); 1839917 (microdescriptor fetch) # ==== Result ==== ==== END ===== ---
**Author:** ![RyukenKai](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ryukenkai/32/4705_2.png) [@RyukenKai](https://community.umbrel.com/u/RyukenKai)\ **Post date:** [September 28, 2023, 11:49pm UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/5 "2023-09-28T23:49:52Z")
So I don’t know what the deal is with the BOLD print XXL Font I though pasting to wordpad and changing the font there would fix it but here we are. ---
**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\ **Post date:** [September 29, 2023, 1:25am UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/6 "2023-09-29T01:25:53Z")
Thanks, can you please try the following steps and let me know if that resolves the issue. > [@Official Umbrel Troubleshooting Guide and FAQ](https://community.umbrel.com/t/official-umbrel-troubleshooting-guide-and-faq/9873/1): > > SSH (Secure Shell) is a way to access and control a device, such as your Umbrel server running on a Umbrel Home or Raspberry Pi, via the command line. To access Umbrel via SSH, follow these steps: > > 1. Open a terminal window on your computer. On macOS, you can open the Terminal app that’s installed by default on every Mac. On Windows, you can open Command Prompt or the PowerShell app. > 2. Type in the following command\* and press the `Enter` key:`ssh -t umbrel@umbrel.local`\*In the command given above, you can replace `umbrel.local` with the local IP of your Umbrel if you prefer. If you are using PowerShell on Windows 10, you may need to run `ssh umbrel@umbrel` instead of the command given above. > 3. You will then be prompted to enter your password. This is the same password you use to access your Umbrel through a browser. The default password before you have created an account on your Umbrel is `moneyprintergobrrr` on Raspberry Pi, and `umbrel` on Umbrel Home. You will not be able to see your password as you type it into the terminal. Once you have typed in your password, press the `Enter` key. > > This will established an SSH connection to your Umbrel server. You can now begin using the command line interface to perform various actions and troubleshoot issues that require SSH. > [@Official Umbrel Troubleshooting Guide and FAQ](https://community.umbrel.com/t/official-umbrel-troubleshooting-guide-and-faq/9873/1): > > - Run the following command. If you are on a Linux machine, you may need to replace `~/umbrel` with the path to your installation directory, as described in _Troubleshooting on Linux_:`sudo ~/umbrel/scripts/stop && sudo ~/umbrel/scripts/start` > - Wait for the process to complete and try installing the app again through the Umbrel App Store. ---
**Author:** ![RyukenKai](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ryukenkai/32/4705_2.png) [@RyukenKai](https://community.umbrel.com/u/RyukenKai)\ **Post date:** [September 29, 2023, 4:09am UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/7 "2023-09-29T04:09:59Z")
Same result. It’s like the path to the repository has been changed or is being blocked. Is there a patch coming out soon? This 0.5.4 update seems to be the crashing a lot of nodes. # umbrel@umbrel:~ $ sudo ~/umbrel/scripts/debug # = Umbrel debug info = ## Umbrel version 0.5.4 ## Flashed OS version v0.5.4 ## Raspberry Pi Model Revision : d03115 Serial : 10000000f38c7854 Model : Raspberry Pi 4 Model B Rev 1.5 ## Firmware May 9 2023 12:16:34 Copyright (c) 2012 Broadcom version 30aa0d70ab280427ba04ebc718c81d4350b9d394 (clean) (release) (start) ## Temperature temp=36.5’C ## Throttling throttled=0x0 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 7.8G 424M 6.1G 8.0M 1.2G 7.3G Swap: 4.1G 0B 4.1G total: 5.4% system: 5.4% ## Memory monitor logs 2023-09-24 05:32:20 Memory monitor running! 2023-09-24 16:12:14 Memory monitor running! 2023-09-24 16:29:02 Memory monitor running! 2023-09-24 16:42:42 Memory monitor running! 2023-09-24 16:46:42 Memory monitor running! 2023-09-24 16:47:40 Memory monitor running! 2023-09-29 04:04:14 Memory monitor running! ## Filesystem information Filesystem Size Used Avail Use% Mounted on /dev/root 60G 4.1G 53G 8% / /dev/sda1 916G 5.4G 864G 1% /home/umbrel/umbrel ## Startup service logs Sep 24 16:47:40 umbrel umbrel startup[980]: ====================================== Sep 24 16:47:40 umbrel umbrel startup[980]: ============= STARTING =============== Sep 24 16:47:40 umbrel umbrel startup[980]: ============== UMBREL ================ Sep 24 16:47:40 umbrel umbrel startup[980]: ====================================== Sep 24 16:47:40 umbrel umbrel startup[980]: Setting environment variables… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting karen… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting status monitors… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting memory monitor… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting backup monitor… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting decoy backup trigger… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting umbreld… Sep 24 16:47:40 umbrel umbrel startup[980]: Starting Docker services… Sep 24 16:47:43 umbrel umbrel startup[980]: Creating network “umbrel\_main\_network” with the default driver Sep 24 16:47:50 umbrel umbrel startup[980]: Creating dashboard … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating manager … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating tor\_proxy … Sep 24 16:47:50 umbrel umbrel startup[980]: Creating auth … Sep 24 16:48:05 umbrel umbrel startup[980]: Creating tor\_proxy … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating dashboard … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating manager … done Sep 24 16:48:06 umbrel umbrel startup[980]: Creating nginx … Sep 24 16:48:06 umbrel umbrel startup[980]: Creating auth … done Sep 24 16:48:07 umbrel umbrel startup[980]: Creating nginx … done Sep 24 16:48:07 umbrel umbrel startup[980]: Removing status server iptables entry… Sep 24 16:48:07 umbrel umbrel startup[980]: Removed existing iptables entry. Sep 24 16:48:07 umbrel umbrel startup[980]: Starting installed apps… Sep 24 16:48:07 umbrel umbrel startup[980]: Umbrel is now accessible at Sep 24 16:48:07 umbrel umbrel startup[980]: [http://umbrel.local](http://umbrel.local) Sep 24 16:48:07 umbrel umbrel startup[980]: local ip address Sep 24 16:48:07 umbrel systemd[1]: Started Umbrel Startup Service. ## External storage service logs Sep 24 16:47:23 umbrel external storage mounter[481]: Running external storage mount script… Sep 24 16:47:23 umbrel external storage mounter[481]: Found device "SABRENT " Sep 24 16:47:23 umbrel external storage mounter[481]: Blacklisting USB device IDs against UAS driver… Sep 24 16:47:23 umbrel external storage mounter[481]: Rebinding USB drivers… Sep 24 16:47:23 umbrel external storage mounter[481]: Checking USB devices are back… Sep 24 16:47:23 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:24 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:25 umbrel external storage mounter[481]: Waiting for USB devices… Sep 24 16:47:26 umbrel external storage mounter[481]: Checking if the device is ext4… Sep 24 16:47:26 umbrel external storage mounter[481]: Yes, it is ext4 Sep 24 16:47:26 umbrel external storage mounter[481]: Checking filesystem for corruption… Sep 24 16:47:26 umbrel external storage mounter[481]: e2fsck 1.44.5 (15-Dec-2018) Sep 24 16:47:27 umbrel external storage mounter[481]: umbrel: clean, 81675/61054976 files, 5497001/244190208 blocks Sep 24 16:47:27 umbrel external storage mounter[481]: Mounting partition… Sep 24 16:47:27 umbrel external storage mounter[481]: Checking if device contains an Umbrel install… Sep 24 16:47:27 umbrel external storage mounter[481]: Yes, it contains an Umbrel install Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage over local Umbrel installation… Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage over local Docker data dir… Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting external storage to /swap Sep 24 16:47:27 umbrel external storage mounter[481]: Bind mounting SD card root at /sd-card… Sep 24 16:47:27 umbrel external storage mounter[481]: Checking Umbrel root is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Checking /var/lib/docker is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Checking /swap is now on external storage… Sep 24 16:47:28 umbrel external storage mounter[481]: Setting up swapfile Sep 24 16:47:28 umbrel external storage mounter[481]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) Sep 24 16:47:28 umbrel external storage mounter[481]: no label, UUID=95aa11c6-f9cd-4885-a993-c428d568cda7 Sep 24 16:47:28 umbrel external storage mounter[481]: Checking SD Card root is bind mounted at /sd-root… Sep 24 16:47:28 umbrel external storage mounter[481]: Starting external drive mount monitor… Sep 24 16:47:28 umbrel external storage mounter[481]: Mount script completed successfully! Sep 24 16:47:28 umbrel systemd[1]: Started External Storage Mounter. ## External storage SD card update service logs – Logs begin at Sun 2023-09-24 16:47:17 UTC, end at Fri 2023-09-29 04:06:25 UTC. – Sep 24 16:47:40 umbrel systemd[1]: Starting External Storage SDcard Updater… Sep 24 16:47:40 umbrel external storage updater[903]: Checking if SD card Umbrel is newer than external storage… Sep 24 16:47:40 umbrel external storage updater[903]: No, SD version is not newer, exiting. Sep 24 16:47:40 umbrel systemd[1]: Started External Storage SDcard Updater. ## Karen logs # 4291 bytes (4.3 kB, 4.2 KiB) copied, 0.000259273 s, 16.6 MB/s Creating encrypted tarball… backup/ backup/.padding Uploading backup… % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 4957 100 146 100 4811 43 1419 0:00:03 0:00:03 --:–:-- 1462 {“message”:“Successfully uploaded backup 1695957285358.tar.gz.pgp for backup ID 18ab908f13a931739c29db44e3bdeae2a47748eb3b7dd21378db9c12a28251a1”} # ====== Backup success ======= karen is running in /home/umbrel/umbrel/events Got signal: karen is getting triggered! ./karen: line 75: /home/umbrel/umbrel/events/triggers/: Is a directory Got signal: karen is getting triggered! ./karen: line 75: /home/umbrel/umbrel/events/triggers/: Is a directory Got signal: app-install-bitcoin karen is getting triggered! Installing ‘bitcoin’ from: [GitHub - getumbrel/umbrel-apps: The official app repository of the Umbrel App Store. Submit apps and updates here. Learn how → https://github.com/getumbrel/umbrel-apps#readme](https://github.com/getumbrel/umbrel-apps.git) Setting up data dir for app bitcoin… sending incremental file list sent 378 bytes received 18 bytes 792.00 bytes/sec total size is 13,135 speedup is 33.17 Pulling images for app bitcoin… Pulling i2pd\_daemon … Pulling bitcoind … Pulling app\_proxy … Pulling server … Pulling tor … Pulling bitcoind … pulling from lncm/bitcoind Pulling tor … error Pulling i2pd\_daemon … error Pulling server … pulling from getumbrel/umbrel-bit… Pulling bitcoind … digest: sha256:fad11d4874f1c2dc43… Pulling bitcoind … status: image is up to date for l… Pulling bitcoind … done Pulling app\_proxy … pulling from getumbrel/app-proxy ERROR: for tor Get “[https://registry-1.docker.io/v2/getumbrel/tor/manifests/sha256:2ace83f22501f58857fa9b403009f595137fa2e7986c4fda79d82a8119072b6a](https://registry-1.docker.io/v2/getumbrel/tor/manifests/sha256:2ace83f22501f58857fa9b403009f595137fa2e7986c4fda79d82a8119072b6a)”: Get “[https://auth.docker.io/token?scope=repository%3Agetumbrel%2Ftor%3Apull&service=registry.docker.io](https://auth.docker.io/token?scope=repository%3Agetumbrel%2Ftor%3Apull&service=registry.docker.io)”: dial tcp [2600:1f18:2148:bc01:a3b0:6734:c617:7c5c]:443: connect: network is unreachable ERROR: for i2pd\_daemon Get “[https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:d154a599793c393cf9c91f8549ba7ece0bb40e5728e1813aa6dd4c210aa606f6](https://registry-1.docker.io/v2/purplei2p/i2pd/manifests/sha256:d154a599793c393cf9c91f8549ba7ece0bb40e5728e1813aa6dd4c210aa606f6)”: Get “[https://auth.docker.io/token?scope=repository%3Apurplei2p%2Fi2pd%3Apull&service=registry.docker.io](https://auth.docker.io/token?scope=repository%3Apurplei2p%2Fi2pd%3Apull&service=registry.docker.io)”: dial tcp [2600:1f18:2148:bc01:a3b0:6734:c617:7c5c]:443: connect: network is unreachable ERROR: for server Get “[https://registry-1.docker.io/v2/getumbrel/umbrel-bitcoin/manifests/sha256:f23b90e3373eef0c756287e50d4b680481847d2be59ad4a1fcc05f7016fc9e43](https://registry-1.docker.io/v2/getumbrel/umbrel-bitcoin/manifests/sha256:f23b90e3373eef0c756287e50d4b680481847d2be59ad4a1fcc05f7016fc9e43)”: dial tcp [2600:1f18:2148:bc02:cfd8:db68:ea1f:277c]:443: connect: network is unreachable ERROR: for app\_proxy Get “[https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:130fb1572fa23e740b4b7b97bce2c206ead6b138d321ff152b1ba35ead61e67a](https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:130fb1572fa23e740b4b7b97bce2c206ead6b138d321ff152b1ba35ead61e67a)”: dial tcp [2600:1f18:2148:bc01:a3b0:6734:c617:7c5c]:443: connect: network is unreachable Get “[https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:130fb1572fa23e740b4b7b97bce2c206ead6b138d321ff152b1ba35ead61e67a](https://registry-1.docker.io/v2/getumbrel/app-proxy/manifests/sha256:130fb1572fa23e740b4b7b97bce2c206ead6b138d321ff152b1ba35ead61e67a)”: dial tcp [2600:1f18:2148:bc01:a3b0:6734:c617:7c5c]:443: connect: network is unreachable ## Docker containers NAMES STATUS nginx Up 2 minutes manager Up 2 minutes dashboard Up 2 minutes tor\_proxy Up 2 minutes auth Up 2 minutes ## Umbrel logs Attaching to manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:12 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 200 2 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:17 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:22 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/apps?installed=1 HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/system/is-sd-card-failing HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/system/memory HTTP/1.0” 200 84 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/system/storage HTTP/1.0” 200 88 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/system/temperature HTTP/1.0” 200 2 “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:26 GMT] “GET /v1/system/info HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager manager | ::ffff:10.21.21.2 - - [Fri, 29 Sep 2023 04:06:27 GMT] “GET /v1/apps HTTP/1.0” 304 - “-” “Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:109.0) Gecko/20100101 Firefox/118.0” manager | manager | umbrel-manager ## Tor Proxy logs # Attaching to tor\_proxy tor\_proxy | Sep 29 04:04:27.000 [notice] Bootstrapped 55% (loading\_descriptors): Loading relay descriptors tor\_proxy | Sep 29 04:04:27.000 [notice] Bootstrapped 60% (loading\_descriptors): Loading relay descriptors tor\_proxy | Sep 29 04:04:27.000 [notice] Bootstrapped 67% (loading\_descriptors): Loading relay descriptors tor\_proxy | Sep 29 04:04:27.000 [notice] Bootstrapped 75% (enough\_dirinfo): Loaded enough directory info to build circuits tor\_proxy | Sep 29 04:04:28.000 [notice] Bootstrapped 80% (ap\_conn): Connecting to a relay to build circuits tor\_proxy | Sep 29 04:04:28.000 [notice] Bootstrapped 85% (ap\_conn\_done): Connected to a relay to build circuits tor\_proxy | Sep 29 04:04:28.000 [notice] Bootstrapped 89% (ap\_handshake): Finishing handshake with a relay to build circuits tor\_proxy | Sep 29 04:04:29.000 [notice] Bootstrapped 90% (ap\_handshake\_done): Handshake finished with a relay to build circuits tor\_proxy | Sep 29 04:04:29.000 [notice] Bootstrapped 95% (circuit\_create): Establishing a Tor circuit tor\_proxy | Sep 29 04:04:29.000 [notice] Bootstrapped 100% (done): Done # ==== Result ==== ==== END ===== ---
**Author:** ![RyukenKai](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ryukenkai/32/4705_2.png) [@RyukenKai](https://community.umbrel.com/u/RyukenKai)\ **Post date:** [October 9, 2023, 1:03am UTC](https://community.umbrel.com/t/running-a-vpn-node-and-umbrel-on-same-network/13760/8 "2023-10-09T01:03:45Z")
Just wanted to post an update. I’m not sure what fixed it other than just brute forcing the first install of the Bidcoin Node via sudo ~/umbrel/scripts/app install bitcoin until it completed all the pulls to done, but my Umbrel is working fine again. I can even install apps from the App store again. I wish I knew what caused the issue so it could be avoided in the future.