# Run tailscale commands

**URL:** <https://community.umbrel.com/t/run-tailscale-commands/7980>\
**Category:** Support and Troubleshooting\
**Created:** [June 7, 2022, 2:59pm UTC](https://community.umbrel.com/t/run-tailscale-commands/7980 "2022-06-07T14:59:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![m\_rio](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/m_rio/32/2820_2.png) [@m\_rio](https://community.umbrel.com/u/m_rio)\
**Post date:** [June 7, 2022, 2:59pm UTC](https://community.umbrel.com/t/run-tailscale-commands/7980/1 "2022-06-07T14:59:41Z")

</div>

I’m trying to configure https for tailscale following this guide: [https://tailscale.com/kb/1153/enabling-https/#configure-https](https://tailscale.com/kb/1153/enabling-https/#configure-https)

somehow I need to be able to run `tailscale cert` to that it provisions a certificate. What is the “umbrel way” of doing this?

---

<div class="post-metadata">

**Author:** ![jstnbry](https://avatars.discourse-cdn.com/v4/letter/j/5fc32e/32.png) [@jstnbry](https://community.umbrel.com/u/jstnbry)\
**Post date:** [June 8, 2022, 2:27am UTC](https://community.umbrel.com/t/run-tailscale-commands/7980/2 "2022-06-08T02:27:32Z")

</div>

im also very interested in a solution for this. tailscale website says this is for v 1.14. i would like to know what version is availible on umbrel. . .

---

<div class="post-metadata">

**Author:** ![m\_rio](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/m_rio/32/2820_2.png) [@m\_rio](https://community.umbrel.com/u/m_rio)\
**Post date:** [June 8, 2022, 1:16pm UTC](https://community.umbrel.com/t/run-tailscale-commands/7980/3 "2022-06-08T13:16:26Z")

</div>

you can see the version in tailscale control panel under the OS column. Mine reads 1.22