# Rasbery Pi → Umbrel Home **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [September 24, 2024, 3:47pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311 "2024-09-24T15:47:11Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![FUEYE](https://avatars.discourse-cdn.com/v4/letter/f/e19b73/32.png) [@FUEYE](https://community.umbrel.com/u/FUEYE)\ **Post date:** [September 24, 2024, 3:47pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311/1 "2024-09-24T15:47:11Z")
Hello. Thank you as always. I bought Umbrel Home and I’m excited about it, but after I run the migration assistant, my bitcoin node doesn’t start. > [@Bitcoin Node does not start](https://community.umbrel.com/t/bitcoin-node-does-not-start/10851): > > Hi everyone, I cannot access my Bitcoin Node anymore. I do have access to umbrel, but when I start my Bitcoin Node it says starting forever: Therefore my Lightning Node is also not starting and I do have some open channels. Can someone please help me? Thanks in advance! What should I do? What can I tell you? Or, I want to initialize it and do IBD again, but I don’t know how to initialize it. Please help me. ---
**Author:** ![FUEYE](https://avatars.discourse-cdn.com/v4/letter/f/e19b73/32.png) [@FUEYE](https://community.umbrel.com/u/FUEYE)\ **Post date:** [September 24, 2024, 3:48pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311/2 "2024-09-24T15:48:21Z")
Should I start initializing from here? ![スクリーンショット 2024-09-25 0.47.45](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/a/a5cb0787bd7d2e5404a83180f80a6bf0b33d94c5.png) ---
**Author:** ![FUEYE](https://avatars.discourse-cdn.com/v4/letter/f/e19b73/32.png) [@FUEYE](https://community.umbrel.com/u/FUEYE)\ **Post date:** [September 24, 2024, 3:49pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311/3 "2024-09-24T15:49:28Z")
It’s no good. I’m in trouble. ![スクリーンショット 2024-09-25 0.48.48](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/4/4f69abf78f34fa76a0b9a8d47bace570963da317.png) ---
**Author:** ![FUEYE](https://avatars.discourse-cdn.com/v4/letter/f/e19b73/32.png) [@FUEYE](https://community.umbrel.com/u/FUEYE)\ **Post date:** [September 24, 2024, 4:01pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311/4 "2024-09-24T16:01:02Z")
Is this the solution? I don’t know much about terminal. It’s difficult. Someone please help me. Where is the reset button? > [@Factory Reset (Umbrel Home)](https://community.umbrel.com/t/factory-reset-umbrel-home/15697): > > Due to the failed upgrade to 1.0 on my Umbrel Home, I decided to completely reset it. If anyone can help me, here’s the thread: [Umbrel home - sitting @ 20% done for 1.0 upgrade - #15 by denny](https://community.umbrel.com/t/umbrel-home-sitting-20-done-for-1-0-upgrade/15590/15) However, if there is no way to save it, then I would like to do a factory reset. How can I do this? bomb ---
**Author:** ![denny](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/denny/32/6330_2.png) [@denny](https://community.umbrel.com/u/denny)\ **Post date:** [September 24, 2024, 10:49pm UTC](https://community.umbrel.com/t/rasbery-pi-umbrel-home/19311/5 "2024-09-24T22:49:47Z")
**Reset Umbrel Home** 1. Open a terminal window on your computer. On macOS, you can open the Terminal app that’s installed by default on every Mac. On Windows, you can open Command Prompt or the PowerShell app. 2. Type in the following command `ssh -t umbrel@umbrel.local` and press the Enter key. 3. Type `cd ~ && sudo ~/umbrel/scripts/stop && sudo rm -rf ~/umbrel && curl -L https://umbrel.sh | bash -s -- --no-install-deps --no-install-start-script && sed -i 's/^check_umbrel_os$/#check_umbrel_os/g' /home/umbrel/umbrel/scripts/umbrel-os/change-password && sed -i 's/if \[\[-z "${UMBREL_OS:-}" \]\]; then/if [[-z "${UMBREL_OS:-}"]] \&\& false; then/g' /home/umbrel/umbrel/scripts/umbrel-os/status-server/set-status && sed -i 's/if \[\[-z "${UMBREL_OS:-}" \]\]; then/if [[-z "${UMBREL_OS:-}"]] \&\& false; then/g' /home/umbrel/umbrel/scripts/umbrel-os/status-server/setup-iptables && sed -i 's/^check_umbrel_os$/#check_umbrel_os/g' /home/umbrel/umbrel/scripts/umbrel-os/service-monitor` 4. Your Umbrel Home should then restart. It’s best to wait a few minutes.