# Permanent loading

**URL:** <https://community.umbrel.com/t/permanent-loading/6644>\
**Category:** Support and Troubleshooting\
**Created:** [March 6, 2022, 5:37pm UTC](https://community.umbrel.com/t/permanent-loading/6644 "2022-03-06T17:37:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![SebastianHamers1983](https://avatars.discourse-cdn.com/v4/letter/s/71e660/32.png) [@SebastianHamers1983](https://community.umbrel.com/u/SebastianHamers1983)\
**Post date:** [March 6, 2022, 5:37pm UTC](https://community.umbrel.com/t/permanent-loading/6644/1 "2022-03-06T17:37:17Z")

</div>

Hi, I installed everything for the raspberry pi using Umbrel. I’m getting this screen when wanting to setup Umbrel in the registration setup pages. Does this take a while? I’ve been rebooting and reinstalling the software as well and it keeps doing this.

Any suggestions?

 ![Schermafbeelding 2022-03-06 om 18.33.37](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/6/63e631fef1cf97b7215996d1b85b834456dbd80f.png)

---

<div class="post-metadata">

**Author:** ![vnt](https://avatars.discourse-cdn.com/v4/letter/v/b5e925/32.png) [@vnt](https://community.umbrel.com/u/vnt)\
**Post date:** [March 6, 2022, 6:42pm UTC](https://community.umbrel.com/t/permanent-loading/6644/2 "2022-03-06T18:42:23Z")

</div>

It takes a while around …5 minutes  
Are you using the same specific hardware requested for the rpi4? 1TB ssd?

---

<div class="post-metadata">

**Author:** ![SebastianHamers1983](https://avatars.discourse-cdn.com/v4/letter/s/71e660/32.png) [@SebastianHamers1983](https://community.umbrel.com/u/SebastianHamers1983)\
**Post date:** [March 6, 2022, 7:00pm UTC](https://community.umbrel.com/t/permanent-loading/6644/3 "2022-03-06T19:00:10Z")

</div>

Yes, rpi 4 8Gb 1tb SSD etc  
I’ve been waiting about 8 hours now, still no progress for some reason.

---

<div class="post-metadata">

**Author:** ![vnt](https://avatars.discourse-cdn.com/v4/letter/v/b5e925/32.png) [@vnt](https://community.umbrel.com/u/vnt)\
**Post date:** [March 7, 2022, 12:35am UTC](https://community.umbrel.com/t/permanent-loading/6644/4 "2022-03-07T00:35:31Z")

</div>

I would try reflashing umbrel OS to the sd card.

---

<div class="post-metadata">

**Author:** ![tom1605](https://avatars.discourse-cdn.com/v4/letter/t/8c91f0/32.png) [@tom1605](https://community.umbrel.com/u/tom1605)\
**Post date:** [March 9, 2022, 2:34pm UTC](https://community.umbrel.com/t/permanent-loading/6644/5 "2022-03-09T14:34:28Z")

</div>

Same here…  
RasPi 4B 4GB 1TB SSD 16GB Card  
Flashed already for the second time.

---

<div class="post-metadata">

**Author:** ![vnt](https://avatars.discourse-cdn.com/v4/letter/v/b5e925/32.png) [@vnt](https://community.umbrel.com/u/vnt)\
**Post date:** [March 9, 2022, 2:43pm UTC](https://community.umbrel.com/t/permanent-loading/6644/6 "2022-03-09T14:43:56Z")

</div>

try formating the SD card to ext4 before reflashing.

---

<div class="post-metadata">

**Author:** ![tom1605](https://avatars.discourse-cdn.com/v4/letter/t/8c91f0/32.png) [@tom1605](https://community.umbrel.com/u/tom1605)\
**Post date:** [March 9, 2022, 4:30pm UTC](https://community.umbrel.com/t/permanent-loading/6644/7 "2022-03-09T16:30:13Z")

</div>

the raspi is up and running. I can login via ssh but the webserver is showing only the start screen as above…  
bevore there was a message that the storage got disconnected.  
I changed the powersupply  
I am using an mSATA SSD 1TB with USB 3 adapter

Device Boot Start End Sectors Size Id Type  
/dev/mmcblk0p1 8192 532479 524288 256M c W95 FAT32 (LBA)  
/dev/mmcblk0p2 532480 31211519 30679040 14.6G 83 Linux

Disk /dev/sda: 953.9 GiB, 1024209543168 bytes, 2000409264 sectors  
Disk model: 2235  
Units: sectors of 1 \* 512 = 512 bytes  
Sector size (logical/physical): 512 bytes / 4096 bytes  
I/O size (minimum/optimal): 4096 bytes / 4096 bytes  
Disklabel type: gpt  
Disk identifier: 553B4962-4BC9-433A-96FC-059F82ECED10