# Not able to update from 0.5.1 to 0.5.3

**URL:** <https://community.umbrel.com/t/not-able-to-update-from-0-5-1-to-0-5-3/11327>\
**Category:** Support and Troubleshooting\
**Created:** [February 5, 2023, 6:34pm UTC](https://community.umbrel.com/t/not-able-to-update-from-0-5-1-to-0-5-3/11327 "2023-02-05T18:34:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lantador](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@lantador](https://community.umbrel.com/u/lantador)\
**Post date:** [February 5, 2023, 6:34pm UTC](https://community.umbrel.com/t/not-able-to-update-from-0-5-1-to-0-5-3/11327/1 "2023-02-05T18:34:48Z")

</div>

Hi  
I am currently running 0.5.1.  
I get the _Umbrel 0.5.3 is now available_ popup, but after running the installation process and restarting, I am still on v. 0.5.1?

What could be the issue here?

---

<div class="post-metadata">

**Author:** ![ParkerS](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/parkers/32/3710_2.png) [@ParkerS](https://community.umbrel.com/u/ParkerS)\
**Post date:** [February 6, 2023, 5:39am UTC](https://community.umbrel.com/t/not-able-to-update-from-0-5-1-to-0-5-3/11327/2 "2023-02-06T05:39:13Z")

</div>

You could try manually updating with the procedure from the guide

To manually update your node using SSH access.

Make a channels backup. Go to Umbrel dashboard - Lightning and on the right top side, 3 dots, save backup on your local PC.

**A. For Rasp Pi users:**

Enter using SSH into your Umbrel node, then run:

```auto
cd ~/umbrel && sudo ./scripts/update/update--repo getumbrel/umbrel#v0.4.8

```

Replace v0.4.8 with the version you want to update to.

If the update was stuck in update, run this before the above command:

```auto
sudo rm statuses/update-in-progress
sudo rm statuses/update-status.json

```

Restart your node if is done OK:

```auto
sudo reboot

```

**B. For normal Linux OS users:**

- Make a channels backup. Go to Umbrel dashboard - Lightning and on the right top side, 3 dots, save backup on your local PC.
- Stop Umbrel node:

```auto
 sudo ./scripts/stop

```

- Save your lnd.conf file if you edited (add color, name or specific features to your node). How to edit lnd.conf in Umbrel. More details about what you can add to a [lnd.conf file here](https://www.lightningnode.info/advanced-tools/lnd.conf). After version 0.4.0 this file is not overwritten anymore with a default one, but just in case, make a backup.

- Update system:

```auto
 sudo apt update && sudo apt upgrade -y

```

- Restart system

- Update Umbrel (replace version with the latest release):

```auto
cd ~/umbrel && sudo ./scripts/update/update --repo getumbrel/umbrel#v0.4.8

```

- Replace lnd.conf file with the one you save it before update (After version 0.4.0 this file is not overwritten anymore with a default one)

- Start Umbrel:

```auto
sudo ./scripts/start

```

- Leave the node to catch up with blocks and logs, usually takes several minutes, be patient. Now you can enter into dashboard Umbrel