# Installing umbrelOS on which x86 system

**URL:** <https://community.umbrel.com/t/installing-umbrelos-on-which-x86-system/22888>\
**Category:** Support and Troubleshooting\
**Created:** [June 3, 2025, 9:42am UTC](https://community.umbrel.com/t/installing-umbrelos-on-which-x86-system/22888 "2025-06-03T09:42:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Libid](https://avatars.discourse-cdn.com/v4/letter/l/bc79bd/32.png) [@Libid](https://community.umbrel.com/u/Libid)\
**Post date:** [June 3, 2025, 9:42am UTC](https://community.umbrel.com/t/installing-umbrelos-on-which-x86-system/22888/1 "2025-06-03T09:42:02Z")

</div>

Hello, could you help me, I did the installation for any X86 system, but when I test on one of my computers, it works normally, but when I test on another machine, it doesn’t start, the system doesn’t start, do I have to make some adjustment to the machine’s bios to run properly?

---

<div class="post-metadata">

**Author:** ![goyban](https://avatars.discourse-cdn.com/v4/letter/g/5f9b8f/32.png) [@goyban](https://community.umbrel.com/u/goyban)\
**Post date:** [June 3, 2025, 12:01pm UTC](https://community.umbrel.com/t/installing-umbrelos-on-which-x86-system/22888/2 "2025-06-03T12:01:02Z")

</div>

The machine should support UEFI and basically that’s it, you can connect your computer to a display to see what is actually happening.