# How to install 1.1.1 on Proxmox **URL:** \ **Category:** Guides\ **Created:** [April 30, 2024, 9:14pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748 "2024-04-30T21:14:29Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [April 30, 2024, 9:14pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/1 "2024-04-30T21:14:29Z")
**1) create a VM in Proxmox’s interface.** On the OS tab, choose. “ **Do not use any media** ” On the System tab, set the BIOS to “ **UEF** I” and uncheck " **Add EFI Disk** ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/6/6386891e2b6d9990d78b43a7e9a43e9b819dcf19.png) On the Disks tab give it at least 32gb Give it the amount of CPUs and RAM you want **2) Go to the proxmox Shell** ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/5/52d054ddb79079ff01bbb7b444018da311b8854a.png) Run ```auto wget https://download.umbrel.com/release/1.1.1/umbrelos-amd64-usb-installer.img.xz ``` ```auto unxz umbrelos-amd64-usb-installer.img.xz ``` ```auto qm importdisk YOUR_VM_ID umbrelos-amd64-usb-installer.img YOUR STORAGE ``` **3) Attach the new drive.** Go to your VM under “ **Hardware** ” You should see “ **Unsued Disk 0** ” Double click it and click “ **Add** ” ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/2/271fc65a012a1cc575252a5674162d5d0becec01.png) **4) Set boot order** Go to ‘ **Options** ’ → ‘ **Boot Order** ’ Move the new drive to the top and check “ **Enabled** ” **5) Start VM** And install ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/c/caa3ce2dfc0b475175f71fb74769f69009ccec04.png) ---
**Author:** ![joost](https://avatars.discourse-cdn.com/v4/letter/j/6de8d8/32.png) [@joost](https://community.umbrel.com/u/joost)\ **Post date:** [May 2, 2024, 10:54am UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/2 "2024-05-02T10:54:36Z")
I have been doing exactly these steps a few times now but i can’t seem to boot up into the installer. Which cpu/system etc. settings are you using? ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 2, 2024, 12:06pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/3 "2024-05-02T12:06:24Z")
I have a Intel NUC with Intel Core i7-8809G CPU Double check you drive setup Should see this under hardware, **scsi0** is the main hard drive and **scsi1** is the intaller USB _(your numbers might be different)_ ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/6/69c3cfc3a5281a03bc2b9591ca8b17ff15350492.png) and the boot order should have **scsi1** ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/f/fbe71233e43907910b00d1d04f939811c76ab08c.png) ---
**Author:** ![pepito\_20240502](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@pepito\_20240502](https://community.umbrel.com/u/pepito_20240502)\ **Post date:** [May 2, 2024, 8:06pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/4 "2024-05-02T20:06:05Z")
I have followed the instructions but my virtual machine is not booting… I get the following error: ![2024-05-02_22-00](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/d/d22acbd025afd3be51f5ab1c44182e00f81b8ea8.png) I have also the right boot order: ![2024-05-02_22-01](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/5/5366de6df214e7f10a763e6cd4ef6985276c8987.png) Could you please help me? One hint: please work together with tteck and create an installation script for Proxmox like [these](https://tteck.github.io/Proxmox/). The installation would be much more straight forward! Thanks very much for your work! ---
**Author:** ![pepito\_20240502](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@pepito\_20240502](https://community.umbrel.com/u/pepito_20240502)\ **Post date:** [May 2, 2024, 8:07pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/5 "2024-05-02T20:07:31Z")
An also the disk configuration should be ok: ![2024-05-02_21-59](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/e/eec8d927000197d5f95ffd26067466ed0e23d80d.png) ---
**Author:** ![pepito\_20240502](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@pepito\_20240502](https://community.umbrel.com/u/pepito_20240502)\ **Post date:** [May 2, 2024, 8:15pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/6 "2024-05-02T20:15:32Z")
Another picture of the boot configuration: ![2024-05-02_22-14](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/8/8576f288608aca81801ef9cd23f90b2146a92475.png) Thanks! Update 03.05.2024: Deleting the EFI disk allowed me to boot. Thanks! ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 2, 2024, 8:22pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/7 "2024-05-02T20:22:57Z")
Delete the EFI Disk and try again ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/7/79729246931020864b5ca4c64d9e2de1eadf72d8.png) ---
**Author:** ![joost](https://avatars.discourse-cdn.com/v4/letter/j/6de8d8/32.png) [@joost](https://community.umbrel.com/u/joost)\ **Post date:** [May 3, 2024, 6:44am UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/8 "2024-05-03T06:44:49Z")
Wow, that did it for me. Any clue why it acts that way? ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 3, 2024, 12:51pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/9 "2024-05-03T12:51:21Z")
Something to do with when the EFI disk is present, the system tries to boot from it but fails ---
**Author:** ![grx](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@grx](https://community.umbrel.com/u/grx)\ **Post date:** [May 3, 2024, 1:23pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/10 "2024-05-03T13:23:39Z")
![1](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/6/621ae8e2feb74d3fbdeb0a2e07d9f1778e8774af.png) ![2](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/9/93cb523aa9dc88eb877e3077aebfd12b2be1e802.png) i did everything but the unused disk does not appear but it shows that’s been created, how can i fix this? ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 3, 2024, 3:22pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/11 "2024-05-03T15:22:42Z")
What happends when you run? `qm importdisk 100 umbrelos-amd64-usb-installer.img local` ---
**Author:** ![grx](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@grx](https://community.umbrel.com/u/grx)\ **Post date:** [May 3, 2024, 5:16pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/12 "2024-05-03T17:16:39Z")
my bad at the end it worked, the problem was that i was switching pages when i saw 100% and not the message of successful mount, thx anyway ---
**Author:** ![stickerey](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/stickerey/32/5689_2.png) [@stickerey](https://community.umbrel.com/u/stickerey)\ **Post date:** [May 4, 2024, 6:18pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/13 "2024-05-04T18:18:17Z")
can you please help me what is “YOUR STORAGE” in this case? this is what I have in proxmox. local-lvm:vm-101-disk-0,iothread=1,size=32G ---
**Author:** ![Minimue81](https://avatars.discourse-cdn.com/v4/letter/m/eb9ed0/32.png) [@Minimue81](https://community.umbrel.com/u/Minimue81)\ **Post date:** [May 4, 2024, 6:39pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/14 "2024-05-04T18:39:46Z")
Simply enter local-lvm. Your VM ID is 101, so the command should look like this: qm importdisk 101 umbrelos-amd64-usb-installer.img local-lvm ---
**Author:** ![polv89](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/polv89/32/5688_2.png) [@polv89](https://community.umbrel.com/u/polv89)\ **Post date:** [May 4, 2024, 6:42pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/15 "2024-05-04T18:42:43Z")
Hi, i followed the guides: [How to update from umbrelOS 0.5 to umbrelOS 1.1 on Linux devices](https://community.umbrel.com/t/how-to-update-from-umbrelos-0-5-to-umbrelos-1-1-on-linux-devices/16704) and [How to install 1.1.1 on Proxmox](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748) Now i have the vm installed, i’ve created a 850G disk for this vm, and now i need to import umbrel-data.tar, the installer made for me a first partition / with 9.6G and a /data partition with 804G, where need import it? The guide say Create the directory /home/umbrel/umbrel/import inside your VM and extract umbrel-data.tar into it by running: mkdir /home/umbrel/umbrel/import && tar -xvf umbrel-data.tar -C /home/umbrel/umbrel/import but i haven’t so much space inside ---
**Author:** ![SchwarzeLanze](https://avatars.discourse-cdn.com/v4/letter/s/958977/32.png) [@SchwarzeLanze](https://community.umbrel.com/u/SchwarzeLanze)\ **Post date:** [May 17, 2024, 1:56pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/16 "2024-05-17T13:56:45Z")
Deactivate “Secure Boot” in VM Bios. To access VM Bios hit “ESC” while Proxmox Logo is shown. ---
**Author:** ![nysir](https://avatars.discourse-cdn.com/v4/letter/n/7ea924/32.png) [@nysir](https://community.umbrel.com/u/nysir)\ **Post date:** [May 27, 2024, 12:42am UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/17 "2024-05-27T00:42:22Z")
Hey Bread, appreciate you posting this. I’ve done all of the above exactly. After I install Proxmox and the VM prompts a reboot, rather than starting Umbrel, it re-loads the same above VM installation window. Any ideas on how I can avoid this loop I’m stuck in? ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 27, 2024, 2:21am UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/18 "2024-05-27T02:21:09Z")
Can you send a screenshot of your hardware tab? Like this ![image](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/d/d2f717459e77af5d81d45ae62eddfe117ab8666a.png) ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 27, 2024, 11:40am UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/20 "2024-05-27T11:40:53Z")
Just to confirm, scsi1 is first in the boot order and there is no EFI Disk in the hardware tab? What screen are you seeing, can you send screenshot? ---
**Author:** ![bread](https://avatars.discourse-cdn.com/v4/letter/b/838e76/32.png) [@bread](https://community.umbrel.com/u/bread)\ **Post date:** [May 27, 2024, 8:43pm UTC](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748/22 "2024-05-27T20:43:57Z")
Ohhh you’ve already installed Umbrel? Now that it’s installed you can remove scsi1 or just make scsi0 first in the boot order [Next page](https://community.umbrel.com/t/how-to-install-1-1-1-on-proxmox/16748.md?page=2)