# How do I configure network settings in Umbrel 1.1? **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [May 1, 2024, 3:33am UTC](https://community.umbrel.com/t/how-do-i-configure-network-settings-in-umbrel-1-1/16763 "2024-05-01T03:33:55Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![ZenRiots](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/zenriots/32/5575_2.png) [@ZenRiots](https://community.umbrel.com/u/ZenRiots)\ **Post date:** [May 1, 2024, 6:31pm UTC](https://community.umbrel.com/t/how-do-i-configure-network-settings-in-umbrel-1-1/16763/4 "2024-05-01T18:31:23Z")
you will find the answer on this Guide… Tho the OP no longer works, I ground down to a solution and posted it in the comments Start at the bottom, not the top 😀 > [@How to set a static IP for your Umbrel server](https://community.umbrel.com/t/how-to-set-a-static-ip-for-your-umbrel-server/845): > > I see a lot of users having issues connecting to umbrel.local and most of them are Windows users. I will try to put here some simple steps so everybody can try them. Not having access to your Umbrel doesn’t really means your Umbrel is broken. Means that the PC from where you access it can’t see it in your LAN or in the parameters you configure your LAN. So could be 4 reasons that maybe your Umbrel is not accessible: IP assigned. The IP for the Umbrel is not set fix, or was changed by your D… --- _[View the full topic](https://community.umbrel.com/t/how-do-i-configure-network-settings-in-umbrel-1-1/16763)._