# "Error: Not allowed by CORS" after recording my 24 word seed

**URL:** <https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266>\
**Category:** Support and Troubleshooting\
**Created:** [July 30, 2021, 11:41pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266 "2021-07-30T23:41:54Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![satsymbol](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/satsymbol/32/79_2.png) [@satsymbol](https://community.umbrel.com/u/satsymbol)\
**Post date:** [July 30, 2021, 11:41pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/1 "2021-07-30T23:41:54Z")

</div>

Not finding a layman’s solution anywhere. Anyone else running into this issue?

---

<div class="post-metadata">

**Author:** ![mykopikid](https://avatars.discourse-cdn.com/v4/letter/m/cc9497/32.png) [@mykopikid](https://community.umbrel.com/u/mykopikid)\
**Post date:** [October 12, 2021, 1:54pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/2 "2021-10-12T13:54:34Z")

</div>

I’m having the same problem. Can anyone assist?

---

<div class="post-metadata">

**Author:** ![pistatxin](https://avatars.discourse-cdn.com/v4/letter/p/858c86/32.png) [@pistatxin](https://community.umbrel.com/u/pistatxin)\
**Post date:** [October 13, 2021, 7:34am UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/3 "2021-10-13T07:34:28Z")

</div>

I solved it by entering through the ip and not through the link with the address … I hope it helps you!

---

<div class="post-metadata">

**Author:** ![bongo](https://avatars.discourse-cdn.com/v4/letter/b/48db29/32.png) [@bongo](https://community.umbrel.com/u/bongo)\
**Post date:** [October 15, 2021, 7:20pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/4 "2021-10-15T19:20:55Z")

</div>

I have the same problem as well. After I wrote down my seed words and clicked the button Next, the error message “Not allowed by CORS” appeared and I couldn’t get any further in the web UI. I’m using the recommended hardware: Raspberry 4 with 8GB, a 1TB SSD and the power supply from Raspberry. At first I couldn’t connect to Umbrel via umbrel.local, but typing in the IP into the browser worked. I use a MacBook Pro M1 and tried it with Safari and with Brave Browser, both lead to the same error message. I turned VPN an firewall off but that didn’t bring me further than described above.  
Does anybody know how to get over this issue?

---

<div class="post-metadata">

**Author:** ![DarthCoin](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/darthcoin/32/1628_2.png) [@DarthCoin](https://community.umbrel.com/u/DarthCoin)\
**Post date:** [October 15, 2021, 7:46pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/5 "2021-10-15T19:46:46Z")

</div>

All these “access” issues will be fixed if you follow [my guide (postes in the Guides section) about how to configure a static IP for your Umbrel node](http://community.umbrel.com/t/how-to-set-a-static-ip-for-your-umbrel-machine/845/2)

---

<div class="post-metadata">

**Author:** ![bongo](https://avatars.discourse-cdn.com/v4/letter/b/48db29/32.png) [@bongo](https://community.umbrel.com/u/bongo)\
**Post date:** [October 15, 2021, 7:57pm UTC](https://community.umbrel.com/t/error-not-allowed-by-cors-after-recording-my-24-word-seed/2266/6 "2021-10-15T19:57:26Z")

</div>

Thank you very much for your reply!