# Error "faild to start umbrel startup service" at startup

**URL:** <https://community.umbrel.com/t/error-faild-to-start-umbrel-startup-service-at-startup/6155>\
**Category:** Support and Troubleshooting\
**Created:** [February 4, 2022, 9:10am UTC](https://community.umbrel.com/t/error-faild-to-start-umbrel-startup-service-at-startup/6155 "2022-02-04T09:10:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![callhami](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@callhami](https://community.umbrel.com/u/callhami)\
**Post date:** [February 4, 2022, 9:10am UTC](https://community.umbrel.com/t/error-faild-to-start-umbrel-startup-service-at-startup/6155/1 "2022-02-04T09:10:56Z")

</div>

I can not start with umbrel.  
My system Raspberry Pi 4 Model B with 8GB RAM

 ![20220204_123719](https://canada1.discourse-cdn.com/flex030/uploads/getumbrel/original/2X/a/ae805ec08e8b8fd480354feb0768b85be62efcf9.jpeg)

Can anyone help me?

---

<div class="post-metadata">

**Author:** ![LoboGuara](https://avatars.discourse-cdn.com/v4/letter/l/54ee81/32.png) [@LoboGuara](https://community.umbrel.com/u/LoboGuara)\
**Post date:** [February 4, 2022, 12:26pm UTC](https://community.umbrel.com/t/error-faild-to-start-umbrel-startup-service-at-startup/6155/2 "2022-02-04T12:26:22Z")

</div>

Seems hardware problems. Do you use a SSD? If so, test the disk system, by looking the copy speed of a large file (\> 1GB) from the disk to itself. It must be greater than 100MB/s for a health SSD storage system. If lesser speed, you have a cable or adaptor or ssd issue.

---

<div class="post-metadata">

**Author:** ![callhami](https://avatars.discourse-cdn.com/v4/letter/c/4491bb/32.png) [@callhami](https://community.umbrel.com/u/callhami)\
**Post date:** [March 20, 2022, 4:32am UTC](https://community.umbrel.com/t/error-faild-to-start-umbrel-startup-service-at-startup/6155/3 "2022-03-20T04:32:25Z")

</div>

You were right.  
I replaced the hard drive cable and the problem was fixed.  
🙏 🌹