# Does UmbrelOS support the Raspberry Pi 5? **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [January 29, 2024, 11:43pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050 "2024-01-29T23:43:32Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![balupton](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/balupton/32/4355_2.png) [@balupton](https://community.umbrel.com/u/balupton)\ **Post date:** [January 29, 2024, 11:43pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/1 "2024-01-29T23:43:32Z")
I’ve recently received my Raspberry Pi 5, and considering experimenting with UmbrelOS on it. ---
**Author:** ![nexondo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/nexondo/32/3621_2.png) [@nexondo](https://community.umbrel.com/u/nexondo)\ **Post date:** [January 29, 2024, 11:54pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/2 "2024-01-29T23:54:27Z")
should be no reason why it’s not working. any linux system work. when the flash is not working try the manual install 🙂 cheers ---
**Author:** ![ioskar](https://avatars.discourse-cdn.com/v4/letter/i/a8b319/32.png) [@ioskar](https://community.umbrel.com/u/ioskar)\ **Post date:** [February 2, 2024, 4:23pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/3 "2024-02-02T16:23:34Z")
I don´t know how to do that, is there a step by step instruction somewhere or could you perhaps write a short guide? I think there are many who would appreciate it! I´m running Citadel OS right now but it´s very buggy so I would rather switch to Umbrel and see if that works better on my Pi 5. ---
**Author:** ![nexondo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/nexondo/32/3621_2.png) [@nexondo](https://community.umbrel.com/u/nexondo)\ **Post date:** [March 13, 2024, 7:47am UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/4 "2024-03-13T07:47:49Z")
just install image from offical site super easy super simple it also gives you the steps for it ---
**Author:** ![Rikser](https://avatars.discourse-cdn.com/v4/letter/r/4bbf92/32.png) [@Rikser](https://community.umbrel.com/u/Rikser)\ **Post date:** [March 14, 2024, 7:43am UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/5 "2024-03-14T07:43:52Z")
Wait 4 days. The rollout of UmbrelOS 1.0 will then start. > **[umbrelOS 1.0 - Home cloud OS, built from the ground-up](https://umbrel.com/umbrelos-1-0)** > > A complete rebirth of umbrelOS, engineered from scratch for unparalleled stability, UX, and security. Rolling out on March 18, 2024 for Umbrel Home & Raspberry Pi users, and in April 2024 for Ubuntu & Debian users. ---
**Author:** ![romanz](https://avatars.discourse-cdn.com/v4/letter/r/d26b3c/32.png) [@romanz](https://community.umbrel.com/u/romanz)\ **Post date:** [March 20, 2024, 7:00am UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/6 "2024-03-20T07:00:44Z")
i install umbrel 1.0 to RPi5 /to microsd/ with nvme hat and M.2 SSD and OS not recognize SSD… I view only SD card storage… How i install Umbrel to RPI5 with NVME SSD ? When i install original Raspbian, NVME working fine. ---
**Author:** ![Rikser](https://avatars.discourse-cdn.com/v4/letter/r/4bbf92/32.png) [@Rikser](https://community.umbrel.com/u/Rikser)\ **Post date:** [March 20, 2024, 7:02am UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/7 "2024-03-20T07:02:29Z")
False thread. Please check this one: > [@How to enable NVME board Raspberry Pi 5](https://community.umbrel.com/t/how-to-enable-nvme-board-raspberry-pi-5/15581): > > Hi all, just installed 1.0 on my RPi 5 and it works find - despite not being able to use wifi using the .conf method. I have [this](https://shop.pimoroni.com/products/nvme-base?variant=41219587178579) installed with a 2TB drive which CasaOS picks up by default but Umbrel isn’t. It’s just picking up the spare space on the mSD. Any ideas on how I can enable this? ---
**Author:** ![whynot](https://avatars.discourse-cdn.com/v4/letter/w/c77e96/32.png) [@whynot](https://community.umbrel.com/u/whynot)\ **Post date:** [March 20, 2024, 8:29am UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/8 "2024-03-20T08:29:04Z")
There seems to be lots of issues with this new Umbrel 1.0. Stay away until they have things fixed. Or look elsewhere. Very disappointing. ---
**Author:** ![Dhalsim](https://avatars.discourse-cdn.com/v4/letter/d/ce7236/32.png) [@Dhalsim](https://community.umbrel.com/u/Dhalsim)\ **Post date:** [April 1, 2024, 9:35pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/9 "2024-04-01T21:35:37Z")
Hi everyone, I‘m trying to install umbrel OS on my raspberrypie 5. when the prompt comes up: umbrel login: Password: I dont know how to get passed this! Happy for any suggestions. Thx ---
**Author:** ![Merlin](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@Merlin](https://community.umbrel.com/u/Merlin)\ **Post date:** [April 1, 2024, 10:55pm UTC](https://community.umbrel.com/t/does-umbrelos-support-the-raspberry-pi-5/15050/10 "2024-04-01T22:55:08Z")
Are you starting fresh or moving from the pi4?