# Argon One cooling and Umbrel together

**URL:** <https://community.umbrel.com/t/argon-one-cooling-and-umbrel-together/1731>\
**Category:** Support and Troubleshooting\
**Created:** [June 27, 2021, 10:45am UTC](https://community.umbrel.com/t/argon-one-cooling-and-umbrel-together/1731 "2021-06-27T10:45:15Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![DHD](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/dhd/32/485_2.png) [@DHD](https://community.umbrel.com/u/DHD)\
**Post date:** [June 27, 2021, 1:49pm UTC](https://community.umbrel.com/t/argon-one-cooling-and-umbrel-together/1731/2 "2021-06-27T13:49:07Z")

</div>

I use the same thing, and what you can do to get the Argon script working with Umbrel:

1. Flash Umbrel using the usual way
2. SSH into the Raspberry Pi (umbrel@umbrel.local or umbrel@IPaddress (example: `umbrel@192.168.0.105`)  
2a) If you haven’t set the password, the default password is `moneyprintergobrrr`
3. Install the Argon script and it should be running alongside with Umbrel.

---

_[View the full topic](https://community.umbrel.com/t/argon-one-cooling-and-umbrel-together/1731)._