# Apps not starting after upgrade to 1.0 **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [March 20, 2024, 5:06pm UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689 "2024-03-20T17:06:40Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Prune2372](https://avatars.discourse-cdn.com/v4/letter/p/ebca7d/32.png) [@Prune2372](https://community.umbrel.com/u/Prune2372)\ **Post date:** [March 20, 2024, 5:06pm UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/1 "2024-03-20T17:06:40Z")
Since I’ve upgraded most of the installed apps are stuck in “Not running” state. The only apps that started are pihole and WatchYourLAN. Some apps that do not start: - Jellyfin - Sonarr - Lidarr - Transmission I’m unable to find any logs to see why they don’t start. ---
**Author:** ![Prune2372](https://avatars.discourse-cdn.com/v4/letter/p/ebca7d/32.png) [@Prune2372](https://community.umbrel.com/u/Prune2372)\ **Post date:** [March 20, 2024, 5:13pm UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/2 "2024-03-20T17:13:07Z")
Happy to report that I’ve just tried this and it worked! > [@Official Umbrel Troubleshooting Guide and FAQ](https://community.umbrel.com/t/official-umbrel-troubleshooting-guide-and-faq/9873/1): > > Resolving “Failed to Start Containers” Error Message > > If your umbrelOS logs show an error message that reads “failed to start containers”, follow these steps: > > 1. Restart your Umbrel server from settings. > 2. If the problem persists, connect to your Umbrel server by following the instructions in _How to SSH into umbrelOS on Umbrel Home or Rasberry Pi_ or by accessing a terminal on your Linux machine. > 3. Run the following command:`sudo systemctl stop docker && sudo rm -rf /var/lib/docker/* && sudo reboot` > > This will stop and reset your docker service files and then it will reboot your device, which may take several minutes. ---
**Author:** ![yesvanessa](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/yesvanessa/32/5215_2.png) [@yesvanessa](https://community.umbrel.com/u/yesvanessa)\ **Post date:** [March 20, 2024, 9:44pm UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/3 "2024-03-20T21:44:30Z")
You shouldn’t assume your average user knows how to use the terminal. I attempted to find the_How to SSH into umbrelOS on Umbrel Home or Rasberry Pi_ instructions to no avail. How about a link? ---
**Author:** ![Prune2372](https://avatars.discourse-cdn.com/v4/letter/p/ebca7d/32.png) [@Prune2372](https://community.umbrel.com/u/Prune2372)\ **Post date:** [March 21, 2024, 5:57am UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/5 "2024-03-21T05:57:27Z")
How to SSH into umbrelOS on Umbrel Home or Rasberry Pi instructions work for me. Open a separate post if you’re having SSH connectivity issues. ---
**Author:** ![fixthemoney](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/fixthemoney/32/1572_2.png) [@fixthemoney](https://community.umbrel.com/u/fixthemoney)\ **Post date:** [April 19, 2024, 1:51pm UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/6 "2024-04-19T13:51:56Z")
Wish I would have seen this post before yesterday. Just wiped the whole Umbrel and storage drive and am now re-syncing. I thought 1.1 would have solved the issue in the upgrade, but it sill persisted. Hopefully others with the same issue will see this post, as this would have probably solved it for me. Happy halving day! ---
**Author:** ![rayvenj](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/rayvenj/32/660_2.png) [@rayvenj](https://community.umbrel.com/u/rayvenj)\ **Post date:** [September 5, 2024, 3:42am UTC](https://community.umbrel.com/t/apps-not-starting-after-upgrade-to-1-0/15689/7 "2024-09-05T03:42:06Z")
SSH umbrel@umbrel.local