# After New Router, Errors Connecting to umbrel.local

**URL:** <https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842>\
**Category:** Support and Troubleshooting\
**Created:** [October 5, 2021, 10:01am UTC](https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842 "2021-10-05T10:01:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![InTheBellyOfTheBeast](https://avatars.discourse-cdn.com/v4/letter/i/7feea3/32.png) [@InTheBellyOfTheBeast](https://community.umbrel.com/u/InTheBellyOfTheBeast)\
**Post date:** [October 5, 2021, 10:01am UTC](https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842/1 "2021-10-05T10:01:42Z")

</div>

Greetings all. For the past two days have received this error message when I try to connect to my node via umbrel.local:

# This site can’t be reached. **umbrel.local** ’s DNS address could not be found. Diagnosing the problem.

DNS\_PROBE\_POSSIBLE

I’ve read through similar topics, flashed the drive again. When it comes to computers, I have reached the end of my expertise. Need guidance. Thank you!

[Screen Shot 2021-10-05 at 6.01.04 AM|690x356](https://community.umbrel.com/uploads/short-url/gbsPmJhxPFvrZyRgqQYNXmJCQE7.jpeg)

---

<div class="post-metadata">

**Author:** ![DarthCoin](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/darthcoin/32/1628_2.png) [@DarthCoin](https://community.umbrel.com/u/DarthCoin)\
**Post date:** [October 5, 2021, 10:26am UTC](https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842/2 "2021-10-05T10:26:37Z")

</div>

read here

> [@How to set a static IP for your Umbrel server](http://community.umbrel.com/t/how-to-set-a-static-ip-for-your-umbrel-machine/845):
>
> I see a lot of users having issues connecting to umbrel.local and most of them are Windows users. I will try to put here some simple steps so everybody can try them. Not having access to your Umbrel doesn’t really means your Umbrel is broken. Means that the PC from where you access it can’t see it in your LAN or in the parameters you configure your LAN. So could be 4 reasons that maybe your Umbrel is not accessible: IP assigned. The IP for the Umbrel is not set fix, or was changed by your D…

---

<div class="post-metadata">

**Author:** ![InTheBellyOfTheBeast](https://avatars.discourse-cdn.com/v4/letter/i/7feea3/32.png) [@InTheBellyOfTheBeast](https://community.umbrel.com/u/InTheBellyOfTheBeast)\
**Post date:** [October 5, 2021, 10:43am UTC](https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842/3 "2021-10-05T10:43:34Z")

</div>

I’m not a Windows user; I tried all your suggestions already. No cigar. Never had this issue until I switched routers - the thing is, it was working fine for a few days after the router upgrade, then issues started. It may or may not be related to the router. But thank you for your comments no less.

---

<div class="post-metadata">

**Author:** ![DarthCoin](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/darthcoin/32/1628_2.png) [@DarthCoin](https://community.umbrel.com/u/DarthCoin)\
**Post date:** [October 5, 2021, 10:44am UTC](https://community.umbrel.com/t/after-new-router-errors-connecting-to-umbrel-local/3842/4 "2021-10-05T10:44:33Z")

</div>

The guide is for all users not only windows