# Add SSD to an existing umbrel configuration **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [September 15, 2022, 4:53pm UTC](https://community.umbrel.com/t/add-ssd-to-an-existing-umbrel-configuration/9467 "2022-09-15T16:53:14Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![doppiab](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@doppiab](https://community.umbrel.com/u/doppiab)\ **Post date:** [September 15, 2022, 4:53pm UTC](https://community.umbrel.com/t/add-ssd-to-an-existing-umbrel-configuration/9467/1 "2022-09-15T16:53:14Z")
Hi everyone, I have a Pine Quartz64 model A with Armbian (a version of Debian dedicated to this machine) I installed umbrel and everything seems to work. Now I need to install an SSD because the SDcard memory is not enough. I connected the ssd to the USB port, but I don’t know how to change the destination on Umbrel. Can someone help me? A thousand thanks. ---
**Author:** ![doppiab](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@doppiab](https://community.umbrel.com/u/doppiab)\ **Post date:** [September 21, 2022, 5:39am UTC](https://community.umbrel.com/t/add-ssd-to-an-existing-umbrel-configuration/9467/2 "2022-09-21T05:39:05Z")
Can anyone help me please? ---
**Author:** ![Marcaday](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Marcaday](https://community.umbrel.com/u/Marcaday)\ **Post date:** [September 22, 2022, 11:54am UTC](https://community.umbrel.com/t/add-ssd-to-an-existing-umbrel-configuration/9467/3 "2022-09-22T11:54:59Z")
Hi @doppiab! Sorry for the delay, You can install Umbrel directly on your SSD using : ` curl -L https://umbrel.sh | bash -s -- --install-path /some/path` make sure before that that Umbrel is not running from the SD card using: `sudo ~/umbrel/scripts/stop` Then you can shutdown Umbrel using the stopping script: `sudo /ssd_path/umbrel/scripts/stop` and move your files from your SD card to your SSD, then run Umbrel from your SSD again : `sudo /ssd_path/umbrel/scripts/start` When you confirm that everything worked and Umbrel is running using your SSD files, then you can erase the Umbrel files on the SD card. Let us know if everything worked out correctly! ---
**Author:** ![doppiab](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@doppiab](https://community.umbrel.com/u/doppiab)\ **Post date:** [September 25, 2022, 9:52am UTC](https://community.umbrel.com/t/add-ssd-to-an-existing-umbrel-configuration/9467/5 "2022-09-25T09:52:47Z")
Hi Marcaday, I mounted the disk and downloaded umbrel and ran the script from that location. Everything works fine. Thanks for answering me. P.s.: The only problem is that I can’t get the latest version of the software to work. The only version that runs on my system is 0.4.18. Do you know why?