# 1TB SSD is full? **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [August 22, 2021, 8:31am UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859 "2021-08-22T08:31:35Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![magsrevs](https://avatars.discourse-cdn.com/v4/letter/m/85e7bf/32.png) [@magsrevs](https://community.umbrel.com/u/magsrevs)\ **Post date:** [August 22, 2021, 8:31am UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/1 "2021-08-22T08:31:35Z")
Hey all, has anyone had any issues with SSD space after upgrading to Umbrel 0.4.1? I have Umbrel running on Pi, 1TB hard drive, but Umbrel says the system is using 933GB, so I get “hard disk full” errors. Does anyone have any advice on how to remedy? Thanks! # Some log file info: # = Umbrel debug info = ## Umbrel version 0.4.1 ## Flashed OS version v0.3.12 ## Raspberry Pi Model Revision : d03114 Serial : 10000000550f4c51 Model : Raspberry Pi 4 Model B Rev 1.4 ## Firmware May 27 2021 14:02:15 Copyright © 2012 Broadcom version 7d9a298cda813f747b51fe17e1e417e7bf5ca94d (clean) (release) (start) ## Temperature temp=44.3’C ## Throttling throttled=0x0 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 7.8G 1.0G 5.6G 9.0M 1.1G 6.7G Swap: 4.1G 0B 4.1G total: 13.2% bitcoin: 4.4% lnd: 3% thunderhub: 2.3% mempool: 2% system: 0.7% tor: 0.4% lightning-terminal: 0.4% electrs: 0% ## Memory monitor logs Memory monitor is already running 2021-07-07 13:29:54 Memory monitor running! 2021-07-12 20:09:13 Memory monitor running! 2021-07-22 13:06:33 Memory monitor running! 2021-07-28 21:12:04 Memory monitor running! 2021-07-29 22:34:12 Memory monitor running! 2021-07-31 23:26:58 Memory monitor running! 3179 ? S 1:05 bash ./scripts/memory-monitor Memory monitor is already running 2021-08-22 07:51:13 Memory monitor running! ## Filesystem information Filesystem Size Used Avail Use% Mounted on /dev/root 29G 2.9G 25G 11% / /dev/sda1 916G 870G 43M 100% /home/umbrel/umbrel ## Startup service logs Aug 22 07:51:24 umbrel umbrel startup[1034]: Creating nginx … done Aug 22 07:51:24 umbrel umbrel startup[1034]: Creating bitcoin … Aug 22 07:51:38 umbrel umbrel startup[1034]: Creating lnd … done Aug 22 07:51:40 umbrel umbrel startup[1034]: Creating bitcoin … done Aug 22 07:51:40 umbrel umbrel startup[1034]: Creating middleware … Aug 22 07:51:40 umbrel umbrel startup[1034]: Creating neutrino-switcher … Aug 22 07:51:43 umbrel umbrel startup[1034]: Creating middleware … done Aug 22 07:51:43 umbrel umbrel startup[1034]: Creating neutrino-switcher … done Aug 22 07:51:43 umbrel umbrel startup[1034]: Removing status server iptables entry… Aug 22 07:51:43 umbrel umbrel startup[1034]: Removed existing iptables entry. Aug 22 07:51:43 umbrel umbrel startup[1034]: Starting installed apps… Aug 22 07:51:43 umbrel umbrel startup[1034]: Starting app mempool… Aug 22 07:51:43 umbrel umbrel startup[1034]: Starting app thunderhub… Aug 22 07:51:43 umbrel umbrel startup[1034]: Starting app lightning-terminal… Aug 22 07:51:48 umbrel umbrel startup[1034]: Creating mempool\_web\_1 … Aug 22 07:51:48 umbrel umbrel startup[1034]: Creating mempool\_api\_1 … Aug 22 07:51:48 umbrel umbrel startup[1034]: Creating mempool\_mariadb\_1 … Aug 22 07:51:48 umbrel umbrel startup[1034]: Creating lightning-terminal\_web\_1 … Aug 22 07:51:49 umbrel umbrel startup[1034]: Creating thunderhub\_web\_1 … Aug 22 07:51:54 umbrel umbrel startup[1034]: Creating mempool\_api\_1 … done Aug 22 07:51:55 umbrel umbrel startup[1034]: Creating mempool\_web\_1 … done Aug 22 07:51:55 umbrel umbrel startup[1034]: Creating thunderhub\_web\_1 … done Aug 22 07:51:55 umbrel umbrel startup[1034]: Creating mempool\_mariadb\_1 … done Aug 22 07:51:55 umbrel umbrel startup[1034]: Creating lightning-terminal\_web\_1 … done Aug 22 07:51:56 umbrel umbrel startup[1034]: Umbrel is now accessible at Aug 22 07:51:56 umbrel umbrel startup[1034]: [http://umbrel.local](http://umbrel.local) Aug 22 07:51:56 umbrel umbrel startup[1034]: [http://192.168.0.101](http://192.168.0.101) Aug 22 07:51:56 umbrel systemd[1]: Started Umbrel Startup Service. Aug 22 07:53:04 umbrel passwd[4950]: pam\_unix(passwd:chauthtok): password changed for umbrel ## External storage service logs – Logs begin at Sun 2021-08-22 07:50:51 UTC, end at Sun 2021-08-22 08:27:17 UTC. – Aug 22 07:50:55 umbrel systemd[1]: Starting External Storage Mounter… Aug 22 07:50:55 umbrel external storage mounter[505]: Running external storage mount script… Aug 22 07:50:55 umbrel external storage mounter[505]: Found device “CT1000MX 500SSD1” Aug 22 07:50:55 umbrel external storage mounter[505]: Blacklisting USB device IDs against UAS driver… Aug 22 07:50:56 umbrel external storage mounter[505]: Rebinding USB drivers… Aug 22 07:50:56 umbrel external storage mounter[505]: Checking USB devices are back… Aug 22 07:50:56 umbrel external storage mounter[505]: Waiting for USB devices… Aug 22 07:50:57 umbrel external storage mounter[505]: Waiting for USB devices… Aug 22 07:50:58 umbrel external storage mounter[505]: Waiting for USB devices… Aug 22 07:50:59 umbrel external storage mounter[505]: Checking if the device is ext4… Aug 22 07:50:59 umbrel external storage mounter[505]: Yes, it is ext4 Aug 22 07:50:59 umbrel external storage mounter[505]: Checking if device contains an Umbrel install… Aug 22 07:50:59 umbrel external storage mounter[505]: Yes, it contains an Umbrel install Aug 22 07:50:59 umbrel external storage mounter[505]: Bind mounting external storage over local Umbrel installation… Aug 22 07:50:59 umbrel external storage mounter[505]: Bind mounting external storage over local Docker data dir… Aug 22 07:50:59 umbrel external storage mounter[505]: Bind mounting external storage to /swap Aug 22 07:50:59 umbrel external storage mounter[505]: Bind mounting SD card root at /sd-card… Aug 22 07:50:59 umbrel external storage mounter[505]: Checking Umbrel root is now on external storage… Aug 22 07:51:00 umbrel external storage mounter[505]: Checking /var/lib/docker is now on external storage… Aug 22 07:51:00 umbrel external storage mounter[505]: Checking /swap is now on external storage… Aug 22 07:51:00 umbrel external storage mounter[505]: Setting up swapfile Aug 22 07:51:03 umbrel external storage mounter[505]: Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) Aug 22 07:51:03 umbrel external storage mounter[505]: no label, UUID=3386e4b5-e2a2-49b3-a218-1aa7056b519a Aug 22 07:51:03 umbrel external storage mounter[505]: Checking SD Card root is bind mounted at /sd-root… Aug 22 07:51:03 umbrel external storage mounter[505]: Starting external drive mount monitor… Aug 22 07:51:03 umbrel external storage mounter[505]: Mount script completed successfully! Aug 22 07:51:03 umbrel systemd[1]: Started External Storage Mounter. ## External storage SD card update service logs – Logs begin at Sun 2021-08-22 07:50:51 UTC, end at Sun 2021-08-22 08:27:17 UTC. – Aug 22 07:51:13 umbrel systemd[1]: Starting External Storage SDcard Updater… Aug 22 07:51:13 umbrel external storage updater[957]: Checking if SD card Umbrel is newer than external storage… Aug 22 07:51:13 umbrel external storage updater[957]: No, SD version is not newer, exiting. Aug 22 07:51:13 umbrel systemd[1]: Started External Storage SDcard Updater. ---
**Author:** ![Matrox](https://avatars.discourse-cdn.com/v4/letter/m/5daacb/32.png) [@Matrox](https://community.umbrel.com/u/Matrox)\ **Post date:** [August 22, 2021, 11:03am UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/2 "2021-08-22T11:03:01Z")
Should be able to get to where its being used up using these commands 👍 [How to Check Disk Space in Linux {df and du Commands} (phoenixnap.com)](https://phoenixnap.com/kb/linux-check-disk-space) ---
**Author:** ![magsrevs](https://avatars.discourse-cdn.com/v4/letter/m/85e7bf/32.png) [@magsrevs](https://community.umbrel.com/u/magsrevs)\ **Post date:** [August 22, 2021, 6:37pm UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/3 "2021-08-22T18:37:56Z")
## Managed to solve it - posting here for future ref if anyone has the same issue! This is a known bug with electrs. The only way I know to fix this is resetting electrs, but please note that this means some apps won’t work and some wallets won’t connect during the ~8h indexing time. sudo systemctl stop umbrel-startup && sudo rm -rf ~/umbrel/electrs/db/mainnet && sudo systemctl start umbrel-startup This command via SSH will reset electrs You can try rebooting and waiting a few hours, maybe it’ll compact the DB automatically ---
**Author:** ![wc-lightning](https://avatars.discourse-cdn.com/v4/letter/w/bb73d2/32.png) [@wc-lightning](https://community.umbrel.com/u/wc-lightning)\ **Post date:** [December 8, 2023, 3:35pm UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/4 "2023-12-08T15:35:52Z")
My hard drive is also full. How can I tell if the the issue I’m having is due to this bug? ---
**Author:** ![wc-lightning](https://avatars.discourse-cdn.com/v4/letter/w/bb73d2/32.png) [@wc-lightning](https://community.umbrel.com/u/wc-lightning)\ **Post date:** [December 8, 2023, 5:12pm UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/5 "2023-12-08T17:12:17Z")
> [@magsrevs](#): > > sudo systemctl stop umbrel-startup && sudo rm -rf ~/umbrel/electrs/db/mainnet && sudo systemctl start umbrel-startup I ran the command: sudo systemctl stop umbrel-startup && sudo rm -rf ~/umbrel/electrs/db/mainnet && sudo systemctl start umbrel-startup I got this as an error: Job for umbrel-startup.service failed because the control process exited with error code. See “systemctl status umbrel-startup.service” and “journalctl -xe” for details. * * * however, there is now 100 more GB available on my drive ---
**Author:** ![robertov416](https://avatars.discourse-cdn.com/v4/letter/r/9fc348/32.png) [@robertov416](https://community.umbrel.com/u/robertov416)\ **Post date:** [February 13, 2025, 2:05pm UTC](https://community.umbrel.com/t/1tb-ssd-is-full/2859/6 "2025-02-13T14:05:42Z")
I upgraded the external drive on my RPi4 from 1TB to 2TB SSD and a month later it was full. I ran your command line and now disk space is back to normal (below 1TB). Thanks for posting this.