# 100% synched Umbrel Pi node running extremely slow **URL:** \ **Category:** Support and Troubleshooting\ **Created:** [May 17, 2024, 11:05am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273 "2024-05-17T11:05:58Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 17, 2024, 11:05am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/1 "2024-05-17T11:05:59Z")
My Umbrel node on Raspberry Pi is extremely slow. Raspberry Pi 4, UmbrelOS 1.1 I have the latest Umbrel software installed, and the node is 100% synched, but even just to log onto the node takes minutes, and just to display the apps loaded takes a couple minutes. To open any app takes a minute or two at least. Anything I do takes minutes, from just viewing available apps, to switching to settings panel takes ages. I thought it might be the Umbrel version and install so have completely redone that by downloading the latest version and flashing the card with the new one. I have it directly plugged into the router to rule out Wifi issues. I only have a few apps running, namely: Bitcoin Node, Blue Wallet Lighting, Electrs, Lightning Node, LNBits, and Ride the Lightning. CPU is at 50% (4 threads) and Temperature is around 30c (There is a fan), 8GB memory with 4GB free, and 1.5TB disk space free. Here is the debug log: # ===================== = Umbrel debug info = ## Umbrel version 0.5.4 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 8.2G 2.2G 218M 409K 5.9G 6.0G Swap: 4.3G 1.7G 2.6G total: 26.5% system: 26.5% ## Memory monitor logs Memory monitor is already running 2023-08-11 10:19:36 Memory monitor running! 2023-08-11 11:40:09 Memory monitor running! 2023-09-24 09:45:12 Memory monitor running! 2024-01-27 08:19:39 Memory monitor running! 2024-01-27 08:19:44 Memory monitor running! 2024-01-27 09:47:25 Memory monitor running! 2024-01-27 10:01:01 Memory monitor running! 2024-01-27 10:13:17 Memory monitor running! 2024-04-30 18:02:29 Memory monitor running! ## Filesystem information Filesystem Size Used Avail Use% Mounted on overlay 4.2G 443M 3.6G 11% / /dev/sda1 1.8T 442G 1.3T 26% /home/umbrel/umbrel ## Karen logs Removing electrs\_tor\_1 … Removing electrs\_tor\_server\_1 … Removing electrs\_tor\_1 … done Removing electrs\_tor\_server\_1 … done Removing electrs\_app\_proxy\_1 … done Removing electrs\_app\_1 … done Removing electrs\_electrs\_1 … done Going to remove electrs\_app\_1, electrs\_app\_proxy\_1, electrs\_electrs\_1, electrs\_t or\_1, electrs\_tor\_server\_1 Stopping bitcoin\_bitcoind\_1 … done Removing bitcoin\_server\_1 … Removing bitcoin\_bitcoind\_1 … Removing bitcoin\_tor\_server\_1 … Removing bitcoin\_app\_proxy\_1 … Removing bitcoin\_tor\_1 … Removing bitcoin\_i2pd\_daemon\_1 … Removing bitcoin\_bitcoind\_1 … done Removing bitcoin\_i2pd\_daemon\_1 … done Removing bitcoin\_tor\_1 … done Removing bitcoin\_tor\_server\_1 … done Removing bitcoin\_server\_1 … done Removing bitcoin\_app\_proxy\_1 … done Going to remove bitcoin\_server\_1, bitcoin\_bitcoind\_1, bitcoin\_tor\_server\_1, bitc oin\_app\_proxy\_1, bitcoin\_tor\_1, bitcoin\_i2pd\_daemon\_1 Stopping Docker services… Stopping nginx … Stopping manager … Stopping auth … Stopping dashboard … Stopping tor\_proxy … Stopping tor\_server … Stopping tor\_server … done Stopping tor\_proxy … done Stopping nginx … done Stopping dashboard … done Stopping manager … done Stopping auth … done Removing nginx … Removing manager … Removing auth … Removing dashboard … Removing tor\_proxy … Removing tor\_server … Removing dashboard … done Removing tor\_proxy … done Removing tor\_server … done Removing auth … done Removing nginx … done Removing manager … done Removing network umbrel\_main\_network ## Docker containers permission denied while trying to connect to the Docker daemon socket at unix:// /var/run/docker.sock: Get “http://%2Fvar%2Frun%2Fdocker.sock/v1.44/containers/js on”: dial unix /var/run/docker.sock: connect: permission denied ## Umbrel logs ./scripts/debug: line 131: docker-compose: command not found ## Tor Proxy logs # ./scripts/debug: line 137: docker-compose: command not found This script requires “docker-compose” to be installed # ==== Result ==== The debug script did not automatically detect any issues with your Umbrel. # umbrel@umbrel:~/umbrel$ ^C umbrel@umbrel:~/umbrel$ ===================== = Umbrel debug info = ## Umbrel version 0.5.4 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 8.2G 2.2G 218M 409K 5.9G 6.0G Swap: 4.3G 1.7G 2.6G total: 26.5% system: 26.5% ## Memory monitor logs Memory monitor is already running 2023-08-11 10:19:36 Memory monitor running! 2023-08-11 11:40:09 Memory monitor running! 2023-09-24 09:45:12 Memory monitor running! 2024-01-27 08:19:39 Memory monitor running! 2024-01-27 08:19:44 Memory monitor running! 2024-01-27 09:47:25 Memory monitor running! 2024-01-27 10:01:01 Memory monitor running! 2024-01-27 10:13:17 Memory monitor running! 2024-04-30 18:02:29 Memory monitor running! ## Filesystem information Filesystem Size Used Avail Use% Mounted on overlay 4.2G 443M 3.6G 11% / /dev/sda1 1.8T 442G 1.3T 26% /home/umbrel/umbrel Karen logs The debug script did not automatically detect any issues with your Umbrel.ers/js -bash: =====================: command not found -bash: =: command not found -bash: =====================: command not found -bash: Umbrel: command not found -bash: --------------: command not found -bash: 0.5.4: command not found -bash: Memory: command not found -bash: ------------: command not found -bash: total: command not found -bash: Mem:: command not found -bash: Swap:: command not found -bash: total:: command not found -bash: system:: command not found -bash: Memory: command not found -bash: -------------------: command not found -bash: Memory: command not found -bash: 2023-08-11: command not found -bash: 2023-08-11: command not found -bash: 2023-09-24: command not found -bash: 2024-01-27: command not found -bash: 2024-01-27: command not found -bash: 2024-01-27: command not found -bash: 2024-01-27: command not found -bash: 2024-01-27: command not found -bash: 2024-04-30: command not found -bash: Filesystem: command not found -bash: ----------------------: command not found -bash: Filesystem: command not found -bash: overlay: command not found -bash: /dev/sda1: Permission denied -bash: Karen: command not found -bash: ----------: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Going: command not found -bash: Stopping: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Going: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Stopping: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Removing: command not found -bash: Docker: command not found -bash: -----------------: command not found -bash: permission: command not found -bash: Umbrel: command not found -bash: -----------: command not found -bash: ./scripts/debug:: No such file or directory -bash: Tor: command not found -bash: --------: command not found -bash: ./scripts/debug:: No such file or directory -bash: This: command not found -bash: ================: command not found -bash: ====: command not found -bash: ================: command not found -bash: The: command not found umbrel@umbrel:~/umbrel$ PLEASE can someone help me to fix this because Umbrel and the apps are unusable for me right now, its just far too slow to do anything. Does anyone have any suggestions or hints? ---
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 18, 2024, 7:51am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/2 "2024-05-18T07:51:07Z")
Is there two versions of Umbrel running or something? I see it says Version 0.5.4, but in the Umbrel web interface I am running UmbrelOS 1.1…could this be the issue? ---
**Author:** ![smolgrrr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/smolgrrr/32/2825_2.png) [@smolgrrr](https://community.umbrel.com/u/smolgrrr)\ **Post date:** [May 18, 2024, 11:43am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/3 "2024-05-18T11:43:47Z")
Yes that is very strange. Just to confirm, you followed these exact steps? [How to update to umbrelOS 1.0](https://umbrel.com/update-to-umbrelos-1-0) ---
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 19, 2024, 7:21am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/4 "2024-05-19T07:21:47Z")
Yes, I removed the microSD card and used balena etcher to flash it. When I open umbrel in the web interface it shows the correct version and says there is no update… ---
**Author:** ![ragnorosso](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/ragnorosso/32/5799_2.png) [@ragnorosso](https://community.umbrel.com/u/ragnorosso)\ **Post date:** [May 19, 2024, 2:36pm UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/5 "2024-05-19T14:36:54Z")
try to stop all other app and verify “max upload target” ---
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 20, 2024, 9:05am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/6 "2024-05-20T09:05:37Z")
Do you mean in SSH? I will try stop all apps, but not sure how to verify max upload target…is there a command for that? ---
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 20, 2024, 11:57am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/7 "2024-05-20T11:57:50Z")
I removed some apps, and did a debug via SSH, and get this output: Linux umbrel 6.6.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) aarch64 ``` ,;###GGGGGGGGGGl#Sp ,##GGGlW""^' '`""%GGGG#S, ,#GGG" "lGG#o #GGl^ '$GG# ,#GGb \GGG, lGG" "GGG #GGGlGGGl##p,,p##lGGl##p,,p###ll##GGGG !GGGlW"""*GGGGGGG#""""WlGGGGG#W""*WGGGGS "" "^ '" "" ``` - Warning --------------------------------------------------------------------- | Terminal access is only enabled for debugging purposes. Any modifications | | made to the umbrelOS system will not be persisted between software updates. | | For use-cases where you want to run custom software in a Linux environment, | | consider using the Portainer app available in the Umbrel App Store. | * * * # Last login: Mon May 20 09:09:51 2024 from 192.168.1.103 umbrel@umbrel:~$ cd umbrel/ umbrel@umbrel:~/umbrel$ ./scripts/debug # = Umbrel debug info = ## Umbrel version 0.5.4 ## Memory usage ``` total used free shared buff/cache available ``` Mem: 8.2G 1.6G 336M 831K 6.4G 6.6G Swap: 4.3G 682M 3.6G total: 19.3% system: 19.3% ## Memory monitor logs Memory monitor is already running 2023-08-11 10:19:36 Memory monitor running! 2023-08-11 11:40:09 Memory monitor running! 2023-09-24 09:45:12 Memory monitor running! 2024-01-27 08:19:39 Memory monitor running! 2024-01-27 08:19:44 Memory monitor running! 2024-01-27 09:47:25 Memory monitor running! 2024-01-27 10:01:01 Memory monitor running! 2024-01-27 10:13:17 Memory monitor running! 2024-04-30 18:02:29 Memory monitor running! ## Filesystem information Filesystem Size Used Avail Use% Mounted on overlay 4.2G 436M 3.6G 11% / /dev/sda1 1.8T 402G 1.4T 24% /home/umbrel/umbrel ## Karen logs Removing electrs\_tor\_1 … Removing electrs\_tor\_server\_1 … Removing electrs\_tor\_1 … done Removing electrs\_tor\_server\_1 … done Removing electrs\_app\_proxy\_1 … done Removing electrs\_app\_1 … done Removing electrs\_electrs\_1 … done Going to remove electrs\_app\_1, electrs\_app\_proxy\_1, electrs\_electrs\_1, electrs\_tor\_1, electrs\_tor\_server\_1 Stopping bitcoin\_bitcoind\_1 … done Removing bitcoin\_server\_1 … Removing bitcoin\_bitcoind\_1 … Removing bitcoin\_tor\_server\_1 … Removing bitcoin\_app\_proxy\_1 … Removing bitcoin\_tor\_1 … Removing bitcoin\_i2pd\_daemon\_1 … Removing bitcoin\_bitcoind\_1 … done Removing bitcoin\_i2pd\_daemon\_1 … done Removing bitcoin\_tor\_1 … done Removing bitcoin\_tor\_server\_1 … done Removing bitcoin\_server\_1 … done Removing bitcoin\_app\_proxy\_1 … done Going to remove bitcoin\_server\_1, bitcoin\_bitcoind\_1, bitcoin\_tor\_server\_1, bitcoin\_app\_proxy\_1, bitcoin\_tor\_1, bitcoin\_i2pd\_daemon\_1 Stopping Docker services… Stopping nginx … Stopping manager … Stopping auth … Stopping dashboard … Stopping tor\_proxy … Stopping tor\_server … Stopping tor\_server … done Stopping tor\_proxy … done Stopping nginx … done Stopping dashboard … done Stopping manager … done Stopping auth … done Removing nginx … Removing manager … Removing auth … Removing dashboard … Removing tor\_proxy … Removing tor\_server … Removing dashboard … done Removing tor\_proxy … done Removing tor\_server … done Removing auth … done Removing nginx … done Removing manager … done Removing network umbrel\_main\_network ## Docker containers permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Get “http://%2Fvar%2Frun%2Fdocker.sock/v1.44/containers/json”: dial unix /var/run/docker.sock: connect: permission denied ## Umbrel logs ./scripts/debug: line 131: docker-compose: command not found ## Tor Proxy logs # ./scripts/debug: line 137: docker-compose: command not found This script requires “docker-compose” to be installed # ==== Result ==== The debug script did not automatically detect any issues with your Umbrel. umbrel@umbrel:~/umbrel$ ---
**Author:** ![javo](https://avatars.discourse-cdn.com/v4/letter/j/e0b2c6/32.png) [@javo](https://community.umbrel.com/u/javo)\ **Post date:** [May 20, 2024, 11:40pm UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/8 "2024-05-20T23:40:00Z")
Just my two cents: My umbrel was taking forever to sync (over 4 days when the normal time is less than 3 days), so I erased the disk with gparted, parted again, make a full disk check and then installed umbrelOS again and it went faster the bitcoin core syncing. ---
**Author:** ![BitcoinZAR](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.umbrel.com/bitcoinzar/32/3216_2.png) [@BitcoinZAR](https://community.umbrel.com/u/BitcoinZAR)\ **Post date:** [May 21, 2024, 6:13am UTC](https://community.umbrel.com/t/100-synched-umbrel-pi-node-running-extremely-slow/17273/9 "2024-05-21T06:13:24Z")
The node is 100% synched, it has nothing to do with that, it is the actual node running slowly. It takes about 5 minutes just to put in the 2FA when logging in, and if I open an app, it takes another 5 minutes just to open the screen. Everything is incredibly slow, but it is 100% synched and up to date with latest software.