# Support and Troubleshooting **URL:** https://community.umbrel.com/c/support/6.md [Latest](https://community.umbrel.com/latest.md) · [Categories](https://community.umbrel.com/categories.md) --- ## [Unable to start storage on new installation](https://community.umbrel.com/t/unable-to-start-storage-on-new-installation/25531)
**Author:** [@robjhyndman](https://community.umbrel.com/u/robjhyndman)\ **Replies:** 1\ **Last updated:** [September 28, 2026, 12:23am UTC](https://community.umbrel.com/t/unable-to-start-storage-on-new-installation/25531 "2026-09-28T00:23:51Z")
I’m trying UmbrelOS for the first time. I’ve set up a usb flash drive with Umbrel 2.0, and booted from it on a NUC which has a 4Tb SSD NVMe drive, currently in ext4 format. It boots ok, sees the drive, but gives the erro… --- ## [Unable to flash image](https://community.umbrel.com/t/unable-to-flash-image/25522)
**Author:** [@Crussader87](https://community.umbrel.com/u/Crussader87)\ **Replies:** 6\ **Last updated:** [September 26, 2026, 10:48pm UTC](https://community.umbrel.com/t/unable-to-flash-image/25522 "2026-09-26T22:48:30Z")
Hello, I’m trying to flash the bootable Image but I keep getting the same error. I’m using MacOs 26.7, I downloaded the Intel&AMD version for internal storage to install it on a miniPC. I’m using the latest version of ba… --- ## [Buffalo LS220 NAS support](https://community.umbrel.com/t/buffalo-ls220-nas-support/25524)
**Author:** [@eligodoyruiz](https://community.umbrel.com/u/eligodoyruiz)\ **Replies:** 1\ **Last updated:** [September 26, 2026, 6:54pm UTC](https://community.umbrel.com/t/buffalo-ls220-nas-support/25524 "2026-09-26T18:54:35Z")
Is umbrelOS compatible with Buffalo NAS devices, such as the LS220? --- ## [\[public-pool\] UI loads but shows no data after Umbrel 2.0 update — nginx upstream IP broken](https://community.umbrel.com/t/public-pool-ui-loads-but-shows-no-data-after-umbrel-2-0-update-nginx-upstream-ip-broken/25526)
**Author:** [@SNK](https://community.umbrel.com/u/SNK)\ **Replies:** 1\ **Last updated:** [September 26, 2026, 6:53pm UTC](https://community.umbrel.com/t/public-pool-ui-loads-but-shows-no-data-after-umbrel-2-0-update-nginx-upstream-ip-broken/25526 "2026-09-26T18:53:42Z")
Update: Additional issue after upgrading to Umbrel 2.0 After upgrading to Umbrel 2.0, Public Pool stopped showing data again despite the previous WebSocket fix still being in place. Root Cause Umbrel 2.0 changed the in… --- ## [Automatic Lightning backups stopped working](https://community.umbrel.com/t/automatic-lightning-backups-stopped-working/25518)
**Author:** [@poodlez](https://community.umbrel.com/u/poodlez)\ **Replies:** 0\ **Last updated:** [September 25, 2026, 2:04pm UTC](https://community.umbrel.com/t/automatic-lightning-backups-stopped-working/25518 "2026-09-25T14:04:09Z")
Automatic Lightning channel backups stopped working for me around August 18, 2026. That was the last confirmed successful automatic backup. Since then, the Lightning app continuously logs: \[backup-monitor\] Error: Reque… --- ## [Very high temperatures after UmbrelOS 2.0 upgrade](https://community.umbrel.com/t/very-high-temperatures-after-umbrelos-2-0-upgrade/25507)
**Author:** [@umbrelio](https://community.umbrel.com/u/umbrelio)\ **Replies:** 6\ **Last updated:** [September 25, 2026, 2:13am UTC](https://community.umbrel.com/t/very-high-temperatures-after-umbrelos-2-0-upgrade/25507 "2026-09-25T02:13:38Z")
CPU working above 80 degrees after upgrade. Be carefull! After 2.0: cat /sys/class/thermal/thermal\_zone\*/temp 27800 85000 (85ºC Av. Temp.) On 1.7.4: at /sys/class/thermal/thermal\_zone\*/temp 27800 50000 (50ºC Av… --- ## [SMB Network Backup Restore Fails - Infinite Loading in Onboarding](https://community.umbrel.com/t/smb-network-backup-restore-fails-infinite-loading-in-onboarding/25506)
**Author:** [@donator](https://community.umbrel.com/u/donator)\ **Replies:** 0\ **Last updated:** [September 23, 2026, 6:11pm UTC](https://community.umbrel.com/t/smb-network-backup-restore-fails-infinite-loading-in-onboarding/25506 "2026-09-23T18:11:02Z")
I am performing a clean install of umbrelOS 2.0 and trying to restore my ~100 GB backup from my local SMB server during the onboarding wizard (Restore from a backup \> Another Umbrel or NAS). I enter the server IP, the … --- ## [Unable to compute new partition table Insufficient space can not add partition 6](https://community.umbrel.com/t/unable-to-compute-new-partition-table-insufficient-space-can-not-add-partition-6/25494)
**Author:** [@it.tech670](https://community.umbrel.com/u/it.tech670)\ **Replies:** 7\ **Last updated:** [September 23, 2026, 5:37am UTC](https://community.umbrel.com/t/unable-to-compute-new-partition-table-insufficient-space-can-not-add-partition-6/25494 "2026-09-23T05:37:48Z")
Hi, I’m new to umbrel OS, first time installing it but I keep getting “Unable to compute new partition table Insufficient space can not add partition 6” What am I doing wrong? Thanks, --- ## [Subject / Issue: LNDhub on Umbrel fails to send payments with LND 0.21.x (gRPC UNIMPLEMENTED: unknown method SendPayment)](https://community.umbrel.com/t/subject-issue-lndhub-on-umbrel-fails-to-send-payments-with-lnd-0-21-x-grpc-unimplemented-unknown-method-sendpayment/25495)
**Author:** [@Tiger](https://community.umbrel.com/u/Tiger)\ **Replies:** 0\ **Last updated:** [September 19, 2026, 10:09pm UTC](https://community.umbrel.com/t/subject-issue-lndhub-on-umbrel-fails-to-send-payments-with-lnd-0-21-x-grpc-unimplemented-unknown-method-sendpayment/25495 "2026-09-19T22:09:58Z")
Hi everyone, I encountered an issue with the LNDhub app on Umbrel when trying to send a Lightning payment from BlueWallet connected to my node. Description Receiving payments works fine (/addinvoice). Sending paym… --- ## [File index crawls all app data — large Immich library exhausts inotify watches, umbreld then burns ~50% CPU continuously](https://community.umbrel.com/t/file-index-crawls-all-app-data-large-immich-library-exhausts-inotify-watches-umbreld-then-burns-50-cpu-continuously/25483)
**Author:** [@nick.capetown](https://community.umbrel.com/u/nick.capetown)\ **Replies:** 3\ **Last updated:** [September 18, 2026, 12:08pm UTC](https://community.umbrel.com/t/file-index-crawls-all-app-data-large-immich-library-exhausts-inotify-watches-umbreld-then-burns-50-cpu-continuously/25483 "2026-09-18T12:08:25Z")
I’ve setup UmbrelOS along with Immich and Nextcloud. I’ve been troubleshooting some issues with AI, but there is one I can’t solve and AI suggests I post it here. I’ll put it down and see what forum members say, thank yo… --- ## [Vane does not like the local SearXNG instance... settings?](https://community.umbrel.com/t/vane-does-not-like-the-local-searxng-instance-settings/25486)
**Author:** [@MartinTheWanderer](https://community.umbrel.com/u/MartinTheWanderer)\ **Replies:** 2\ **Last updated:** [September 18, 2026, 10:23am UTC](https://community.umbrel.com/t/vane-does-not-like-the-local-searxng-instance-settings/25486 "2026-09-18T10:23:33Z")
Hi all! Installed SearXNG on my Umbrel Home (Umbrel OS 2 beta) - works fine. Installed Vane, configured it to use Ollama with local model on a Spark-box on the same network (works), and for search entered the URL of th… --- ## [AlbyHub with CLN](https://community.umbrel.com/t/albyhub-with-cln/25482)
**Author:** [@Kuba](https://community.umbrel.com/u/Kuba)\ **Replies:** 1\ **Last updated:** [September 16, 2026, 3:43pm UTC](https://community.umbrel.com/t/albyhub-with-cln/25482 "2026-09-16T15:43:26Z")
Hi! Is there a guide somewhere on how to get Albyhub working on UmbrelOS with Core Lightning (CLN) installed? What should I enter for the required parameters CLN\_ADDRESS and CLN\_LIGHTNING\_DIR? “umbrel.local:2110”? Than… --- ## [2.0 beta 1. Keyboard not working, Android virtual machine](https://community.umbrel.com/t/2-0-beta-1-keyboard-not-working-android-virtual-machine/25474)
**Author:** [@KURAIEV](https://community.umbrel.com/u/KURAIEV)\ **Replies:** 2\ **Last updated:** [September 14, 2026, 10:48am UTC](https://community.umbrel.com/t/2-0-beta-1-keyboard-not-working-android-virtual-machine/25474 "2026-09-14T10:48:59Z")
I created an Android virtual machine, but after booting up, it requires logging in via the command line by entering “android login”; however, the virtual keyboard does not activate, and there is no button to bring it up.… --- ## [Ethernet not detected on Beelink SER5 MAX (Realtek 2.5GbE error -ENODEV: unknown chip XID 689)](https://community.umbrel.com/t/ethernet-not-detected-on-beelink-ser5-max-realtek-2-5gbe-error-enodev-unknown-chip-xid-689/25475)
**Author:** [@mohit](https://community.umbrel.com/u/mohit)\ **Replies:** 0\ **Last updated:** [September 14, 2026, 6:16am UTC](https://community.umbrel.com/t/ethernet-not-detected-on-beelink-ser5-max-realtek-2-5gbe-error-enodev-unknown-chip-xid-689/25475 "2026-09-14T06:16:30Z")
Hardware: Beelink SER5 MAX Mini PC (AMD Ryzen 7 6800U) Model: SER5 MAX-L-24500EJ0W64PRO-DP/XA OS: umbrelOS 2.0 beta 1 Issue: When booting umbrelOS 2.0 with Ethernet connected, no wired interface is detected or assign… --- ## [Ollama + OpenClaw Config](https://community.umbrel.com/t/ollama-openclaw-config/25466)
**Author:** [@Comanche724](https://community.umbrel.com/u/Comanche724)\ **Replies:** 1\ **Last updated:** [September 13, 2026, 3:42pm UTC](https://community.umbrel.com/t/ollama-openclaw-config/25466 "2026-09-13T15:42:35Z")
Hi Smart People, I’ve been trying to setup a local version of Ollama on OpenClaw (both apps via UmbrelOS). When setting up OpenClaw I keep getting authentication errors when connecting to my locally downloaded version o… --- ## [Paperless ngx issue](https://community.umbrel.com/t/paperless-ngx-issue/25473)
**Author:** [@5c1gu3lu](https://community.umbrel.com/u/5c1gu3lu)\ **Replies:** 0\ **Last updated:** [September 12, 2026, 10:26am UTC](https://community.umbrel.com/t/paperless-ngx-issue/25473 "2026-09-12T10:26:16Z")
Hi, I,m running UmbrelOS 1.7.4 on a Proxmox VM. I tried to install Paperless ngx 3.1.3 from the app store. The installation run slowly and, at the end, I tried to launch the program but an Error\_Connection\_Refuses opened… --- ## [Umbrel 2.0 does not see additional drives](https://community.umbrel.com/t/umbrel-2-0-does-not-see-additional-drives/25471)
**Author:** [@ilium007](https://community.umbrel.com/u/ilium007)\ **Replies:** 3\ **Last updated:** [September 12, 2026, 4:46am UTC](https://community.umbrel.com/t/umbrel-2-0-does-not-see-additional-drives/25471 "2026-09-12T04:46:14Z")
I installed Umbrel 2.0 on Proxmox to test the new Failsafe feature. I have the drives available in Umbrel: umbrel@umbrel:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 32G 0 disk sdb … --- ## [UmbrelOS 2.0 download links wrong?](https://community.umbrel.com/t/umbrelos-2-0-download-links-wrong/25472)
**Author:** [@ilium007](https://community.umbrel.com/u/ilium007)\ **Replies:** 0\ **Last updated:** [September 12, 2026, 3:31am UTC](https://community.umbrel.com/t/umbrelos-2-0-download-links-wrong/25472 "2026-09-12T03:31:29Z")
Are these download links wrong? Selecting the USB drive option downloads the .img.xz file, selecting the Onboard storage option downloads the .iso file. --- ## [umbrelOS 2.0 + USB SSD: if your box feels unreasonably slow or like the drive is dying, check your readahead before you buy a new one](https://community.umbrel.com/t/umbrelos-2-0-usb-ssd-if-your-box-feels-unreasonably-slow-or-like-the-drive-is-dying-check-your-readahead-before-you-buy-a-new-one/25461)
**Author:** [@Muenster-chz](https://community.umbrel.com/u/Muenster-chz)\ **Replies:** 0\ **Last updated:** [September 7, 2026, 7:25pm UTC](https://community.umbrel.com/t/umbrelos-2-0-usb-ssd-if-your-box-feels-unreasonably-slow-or-like-the-drive-is-dying-check-your-readahead-before-you-buy-a-new-one/25461 "2026-09-07T19:25:04Z")
If you’re on umbrelOS 2.0 with a USB-attached SSD and the machine has become unusable, read this before you replace any hardware. Mine looked exactly like a failing drive for two days. The drive was fine. It’s a storage … --- ## [FailSafe in raspberry pi 5](https://community.umbrel.com/t/failsafe-in-raspberry-pi-5/25446)
**Author:** [@atuljakhar](https://community.umbrel.com/u/atuljakhar)\ **Replies:** 0\ **Last updated:** [September 3, 2026, 6:19am UTC](https://community.umbrel.com/t/failsafe-in-raspberry-pi-5/25446 "2026-09-03T06:19:52Z")
Hello Community team members, Failsafe is not available on the Raspberry Pi 5 which is a feature that is frequently requested. Could anyone assist me in using Failsafe on the Pi 5? --- ## [Feature Request: Simple Static Web Server App for HTML Hosting](https://community.umbrel.com/t/feature-request-simple-static-web-server-app-for-html-hosting/25445)
**Author:** [@e75hz](https://community.umbrel.com/u/e75hz)\ **Replies:** 1\ **Last updated:** [September 2, 2026, 9:23pm UTC](https://community.umbrel.com/t/feature-request-simple-static-web-server-app-for-html-hosting/25445 "2026-09-02T21:23:59Z")
Hello Umbrel Team, Currently, there is no simple way for users to host a basic, pre-made static HTML/CSS/JS website on Umbrel OS. File Browser isolates the files, and Nginx Proxy Manager cannot access them due to Docker… --- ## [Bitcoin node stuck on pre-synchronizing block headers](https://community.umbrel.com/t/bitcoin-node-stuck-on-pre-synchronizing-block-headers/25110)
**Author:** [@RAZED](https://community.umbrel.com/u/RAZED)\ **Replies:** 1\ **Last updated:** [September 2, 2026, 4:19pm UTC](https://community.umbrel.com/t/bitcoin-node-stuck-on-pre-synchronizing-block-headers/25110 "2026-09-02T16:19:02Z")
Happened the other day where i went into Umbrel and it kept saying pre-synchronizing block headers, and at 0% syncing. I uninstalled bitcoin node and did a new IBD. got to about 90% and now saying same thing. Stuck on pr… --- ## [Updated OS, now node dead](https://community.umbrel.com/t/updated-os-now-node-dead/25434)
**Author:** [@an0n](https://community.umbrel.com/u/an0n)\ **Replies:** 5\ **Last updated:** [September 1, 2026, 4:25am UTC](https://community.umbrel.com/t/updated-os-now-node-dead/25434 "2026-09-01T04:25:59Z")
Against my better judgment I relented and updated Umbrel OS to the newest version today. Big mistake. Of course now my node is dead, cannot be accessed from umbrel.local and the light on the SSD isn’t blinking. Unplugged… --- ## [Something wrong with Umbrel – Has the Umbrel OS been compromised?](https://community.umbrel.com/t/something-wrong-with-umbrel-has-the-umbrel-os-been-compromised/25429)
**Author:** [@umbrelio](https://community.umbrel.com/u/umbrelio)\ **Replies:** 2\ **Last updated:** [August 29, 2026, 6:13pm UTC](https://community.umbrel.com/t/something-wrong-with-umbrel-has-the-umbrel-os-been-compromised/25429 "2026-08-29T18:13:20Z")
Umbrel CLI is spawning thousands of zombie sh processes for weeks Hi Umbrel team, I’m reporting a serious issue affecting my Umbrel node. After extensive debugging, I found that Umbrel’s main CLI process has been spawn… --- ## [\[public-pool\] nginx proxy missing WebSocket headers — UI loads but shows no data](https://community.umbrel.com/t/public-pool-nginx-proxy-missing-websocket-headers-ui-loads-but-shows-no-data/25435)
**Author:** [@SNK](https://community.umbrel.com/u/SNK)\ **Replies:** 0\ **Last updated:** [August 29, 2026, 5:02am UTC](https://community.umbrel.com/t/public-pool-nginx-proxy-missing-websocket-headers-ui-loads-but-shows-no-data/25435 "2026-08-29T05:02:05Z")
Description The Public Pool app loads the UI correctly but shows no data — it stays in an infinite loading spinner. Root Cause The nginx configuration at public-pool/data/proxy/nginx.conf is missing the WebSocket upgrad… --- ## [Umbrel login problem](https://community.umbrel.com/t/umbrel-login-problem/19057)
**Author:** [@Micael](https://community.umbrel.com/u/Micael)\ **Replies:** 2\ **Last updated:** [August 28, 2026, 2:04am UTC](https://community.umbrel.com/t/umbrel-login-problem/19057 "2026-08-28T02:04:53Z")
Hello I have just install Umbrel and after restart i get a umbrel login How do i do to get in to the app on the computer i install it to. I only have 1 computer so i cant log in from a nother pc. Thanks --- ## [Portainer update broken everything](https://community.umbrel.com/t/portainer-update-broken-everything/25266)
**Author:** [@umbrelio](https://community.umbrel.com/u/umbrelio)\ **Replies:** 11\ **Last updated:** [August 28, 2026, 1:42am UTC](https://community.umbrel.com/t/portainer-update-broken-everything/25266 "2026-08-28T01:42:15Z")
All my containers inside Portainer stopped working right after the Portainer update. I can’t ping 8.8.8.8 from inside any container, and internal DNS resolution is completely broken, containers can’t resolve each other’s… --- ## [How to go back to Terminal after closing it?](https://community.umbrel.com/t/how-to-go-back-to-terminal-after-closing-it/25418)
**Author:** [@franciscojs](https://community.umbrel.com/u/franciscojs)\ **Replies:** 0\ **Last updated:** [August 23, 2026, 3:52pm UTC](https://community.umbrel.com/t/how-to-go-back-to-terminal-after-closing-it/25418 "2026-08-23T15:52:06Z")
I opened up the Umbrel Terminal within Advanced Settings. Attempted to edit a .yml file using vi, but when trying to get out of instert mode with Esc key, the terminal closed. Opening the terminal again shows a new one,… --- ## [Backups die silently when kopia's cache exhausts SD card inodes (umbrelOS 1.7.4)](https://community.umbrel.com/t/backups-die-silently-when-kopias-cache-exhausts-sd-card-inodes-umbrelos-1-7-4/25377)
**Author:** [@UmbrelDreams](https://community.umbrel.com/u/UmbrelDreams)\ **Replies:** 3\ **Last updated:** [August 22, 2026, 1:08pm UTC](https://community.umbrel.com/t/backups-die-silently-when-kopias-cache-exhausts-sd-card-inodes-umbrelos-1-7-4/25377 "2026-08-22T13:08:04Z")
Raspberry Pi 4, umbrelOS 1.7.4, backing up to a NAS. The issue My backups had been failing for ~22 hours with no warning anywhere — dashboard clean, all apps ready. I only found it by querying the backup repo by hand: … --- ## [Bricked my Umbrel Pro...help!?!](https://community.umbrel.com/t/bricked-my-umbrel-pro-help/25402)
**Author:** [@ipani](https://community.umbrel.com/u/ipani)\ **Replies:** 0\ **Last updated:** [August 17, 2026, 1:51pm UTC](https://community.umbrel.com/t/bricked-my-umbrel-pro-help/25402 "2026-08-17T13:51:22Z")
Noob here. Hi. So I’ve had my Umbrel Pro for a matter of days and I’ve already bricked the thing…I think. I guess I got carried away with my \*arr stack and it completely ran out of disk space and it won’t even boot whe… [Next page](https://community.umbrel.com/c/support/6.md?page=1)